USB NIC Driver for ESXi 5.1/5.5/6.0/6.5/6.7 (Realtek)

Realtek r8152 driver for ESXi

**Update (12/02/19)**

Modules compiled for ESXi 6.5 will work on ESXi 6.7 without modification

Source code updated to version 2.11.0 (latest)

Version 2.11.0 adds support for the upcoming 2.5G USB C Ethernet adapters (RTL8156)

Build script for ESXi 6.5 added

Key features:

Supports Realtek RTL8153 and RTL8152
TCP, UDP and IPv4 checksum offload (RX and TX)
TCP, UDP and IPv6 checksum offload (RX and TX)
Scatter-Gather support
TCP Segmentation Offload support
Wake on LAN support
VLAN support
Jumbo Frames (9k)
Energy Efficient Ethernet (EEE)

Known issues

Unloading the module manually is not supported
- The following message appears on vmkernel.log:
  Failed to close vmnic32: not ready. Flags 0x1140

This message can be safely ignored, however, if the module is reloaded, the vmnic number will change

###Table of Contents

Tested Devices
Required Software
Setup
- Prepare the build environment
- Building the driver

Tested Devices

Tested by Glen Kemp

Anker Unibody 3-Port USB 3.0 and Ethernet Hub

USB 2.0 Adapter (RTL8152B Chipset)

TP-LINK UE200 USB 2.0 to 100 Mbps Ethernet Network Adapter

Tested by Glen Kemp

Smays 3-Port OTG USB-HUB and USB2.0 RJ45 Ethernet Network Adapter

Required Software

CentOS 5.3-x86 64 bit DVD ISO - http://mirror.ash.fastserv.com/centos/5.3/isos/x86_64/CentOS-5.3-x86_64-bin-DVD.iso

ESXi 6.0 and 6.5

VMware ESXi 6.0 source code (VMware-ESXI-60U2-ODP.iso) and build toolchain (VMware-TOOLCHAIN-ODP-vsphere60u2-Mar-01-2016.iso)

ESXi 6.0 Update 2 OSS Download - https://my.vmware.com/web/vmware/details?downloadGroup=ESXI60U2_OSS&productId=491

ESXi 5.5

VMware ESXi 5.5 source code (VMware-ESX-5.5.0u03-ODP.iso) and build toolchain (VMware-550u3-TOOLCHAIN-ODP_21_July_2015.iso)

ESXi 5.5 Update 3 OSS Download - https://my.vmware.com/web/vmware/details?downloadGroup=ESXI55U3_OSS&productId=353

ESXi 5.1

VMware ESXi 5.1 source code and build toolchain are both included in a single file (VMware-esx-open-source-5.1.0u2.oss.tar).

ESXi 5.1 Update 2 OSS Download - https://my.vmware.com/group/vmware/details?downloadGroup=VSPHERE_51U2_OSS&productId=290#

Setup

The embedded documentation for the ESXi open source disclosure packages recommends the build should be performed on a CentOS 5.3 x64 system to produce 64-bit packages. There are other systems mentioned (CentOS 32-bit, Red Hat, FreeBSD and Windows), so take your pick!

To make life easier, I customised the Kickstart file provided with the ESXi 5.5 Toolchain ISO (under the config folder) to build a CentOS 5.3 x64 server VM. Once it is up and running, we deviate a bit from the instructions provided by VMware.

The initial build directory structure should be:

mkdir -p /build/{vsphere,toolchain}

The next steps are a bit different, depending on whether the build environment is being prepared for ESXi 5.1 or later versions:

Prepare the build environment

ESXi 5.1

Extract the contents of the compressed tar archive to /build/vsphere:

cd /build/vsphere
tar xvf /path/to/VMware-esx-open-source-5.1.0u2.oss.tar --strip-components=1 server/vmkdrivers-gpl
cd vmkdrivers-gpl

You are now ready to compile the build toolchain:

glibc

cd glibc-2.3.2-95.44
bash ./BUILD.txt
cd ..

binutils

cd binutils-2.17.50.0.15-modcall
bash ./BUILD.txt
cd ..

gcc

cd gcc-4.1.2-9
bash ./BUILD.txt
cd ..

Unlike ESXi 5.1, the ODP source code and the build toolchain for 5.5 and 6.0 are distributed as two separate ISO images. The two ISOs include hundreds of packages, but only a small subset is actually required to build the drivers.

ESXi 5.5

Copy the vmkdrivers-gpl folder from the ODP ISO (VMware-ESX-5.5.0u03-ODP.iso) to /build/vsphere/

cp -r /cdrom/vmkdrivers-gpl /build/vsphere
umount /cdrom

Note: The above assumes that /cdrom is the mount point for the ISO/Physical DVD — your environment might differ.

The toolchain ISO (VMware-550u3-TOOLCHAIN-ODP_21_July_2015.iso) includes the source for multiple libraries and tools, but only glibc, binutils and gcc at specific versions are required.

cd /build/toolchain
tar xvf /cdrom/tc-src.tar src/gcc-4.4.3-2 src/glibc-2.3.2-95.44 src/binutils-2.20.1-1 src/common/functions
umount /cdrom

Note: The above assumes that /cdrom is the mount point for the ISO/Physical DVD — your environment might differ.

Compile the build toolchain:

glibc

cd /build/toolchain/src/glibc-2.3.2-95.44
bash ./install.sh

binutils

cd /build/toolchain/src/binutils-2.20.1-1
bash ./install.sh

gcc

cd /build/toolchain/src/gcc-4.4.3-2
bash ./install.sh

ESXi 6.0

Copy the vmkdrivers-gpl folder from the ODP ISO (VMware-ESXI-60U2-ODP.iso) to /build/vsphere/

cp -r /cdrom/vmkdrivers-gpl /build/vsphere
umount /cdrom

Note: The above assumes that /cdrom is the mount point for the ISO/Physical DVD — your environment might differ.

The toolchain ISO (VMware-TOOLCHAIN-ODP-vsphere60u2-Mar-01-2016.iso) includes the source for multiple libraries and tools, but only glibc, binutils and gcc at specific versions are required.

cd /build/toolchain
tar xvf /cdrom/tc-src.tar src/gcc-4.4.3-2 src/glibc-2.3.2-95.44 src/binutils-2.22 src/common/functions
umount /cdrom

Note: The above assumes that /cdrom is the mount point for the ISO/Physical DVD — your environment might differ.

Compile the build toolchain:

glibc

cd /build/toolchain/src/glibc-2.3.2-95.44
bash ./install.sh

binutils

cd /build/toolchain/src/binutils-2.22
bash ./install.sh

gcc

cd /build/toolchain/src/gcc-4.4.3-2
bash ./install.sh

ESXi 6.5

The ODB source and toolchain for 6.5 are completely broken and won't produce a working driver. However, there are no differences between the 6.0 and 6.5 source files, as VMware is preparing to drop support for legacy drivers.

Please follow the instructions as if compiling for ESXi 6.0, noting the changes highlighted in the sections below.

Building the driver

There is a little bit more preparation to be done to build the driver. Again, some of the steps are different depending on the version of ESXi.

Common

cd /build/vsphere/vmkdrivers-gpl
tar zxvf vmkdrivers-gpl.tgz

Create the directory for the driver's source code. The same source files are used to build the driver on all environments.

cd /build/vsphere/vmkdrivers-gpl
mkdir vmkdrivers/src_92/drivers/usb/net/r8152-2.06.0
cp /path/to/source/r8152.c vmkdrivers/src_92/drivers/usb/net/r8152-2.06.0/
cp /path/to/source/compatibility.h vmkdrivers/src_92/drivers/usb/net/r8152-2.06.0/

Create the directory that will hold the driver's namespace dependencies map:

ESXi 5.1

cd /build/vsphere/vmkdrivers-gpl
mkdir BLD/build/HEADERS/CUR-92-vmkdrivers-namespace/vmkernel64/release/r8152-2.06.0
echo -e "VMK_NAMESPACE_REQUIRED(\"com.vmware.usb\", \"9.2.1.0\");\
\nVMK_NAMESPACE_REQUIRED(\"com.vmware.usbnet\", \"9.2.1.0\");"\
> BLD/build/HEADERS/CUR-92-vmkdrivers-namespace/vmkernel64/release/r8152-2.06.0/__namespace.h

ESXi 5.5

cd /build/vsphere/vmkdrivers-gpl
mkdir BLD/build/HEADERS/CUR-92-vmkdrivers-namespace/vmkernel64/release/r8152-2.06.0
echo -e "VMK_NAMESPACE_REQUIRED(\"com.vmware.usb\", \"9.2.2.0\");\
\nVMK_NAMESPACE_REQUIRED(\"com.vmware.usbnet\", \"9.2.2.0\");"\
> BLD/build/HEADERS/CUR-92-vmkdrivers-namespace/vmkernel64/release/r8152-2.06.0/__namespace.h

ESXi 6.0

cd /build/vsphere/vmkdrivers-gpl
mkdir BLD/build/HEADERS/92-vmkdrivers-namespace/vmkernel64/release/r8152-2.06.0
echo -e "VMK_NAMESPACE_REQUIRED(\"com.vmware.usb\", \"9.2.3.0\");\
\nVMK_NAMESPACE_REQUIRED(\"com.vmware.usbnet\", \"9.2.3.0\");"\
> BLD/build/HEADERS/92-vmkdrivers-namespace/vmkernel64/release/r8152-2.06.0/__namespace.h

ESXi 6.5

cd /build/vsphere/vmkdrivers-gpl
mkdir BLD/build/HEADERS/92-vmkdrivers-namespace/vmkernel64/release/r8152-2.06.0
echo -e "VMK_NAMESPACE_REQUIRED(\"com.vmware.usb\", \"10.0\");\
\nVMK_NAMESPACE_REQUIRED(\"com.vmware.usbnet\", \"9.2.3.0\");"\
> BLD/build/HEADERS/92-vmkdrivers-namespace/vmkernel64/release/r8152-2.06.0/__namespace.h

Finally, copy the appropriate build script to /build/vsphere/vmkdrivers-gpl and compile the driver.

ESXi 5.1

cd /build/vsphere/vmkdrivers-gpl
cp /path/to/scripts/build-r8152-2.06.0_u51.sh .
chmod a+x build-r8152-2.06.0_u51.sh
./build-r8152-2.06.0_u51.sh

ESXi 5.5

cd /build/vsphere/vmkdrivers-gpl
cp /path/to/scripts/build-r8152-2.06.0_u55.sh .
chmod a+x build-r8152-2.06.0_u55.sh
./build-r8152-2.06.0_u55.sh

ESXi 6.0 and 6.5

cd /build/vsphere/vmkdrivers-gpl
cp /path/to/scripts/build-r8152-2.06.0_u60.sh .
chmod a+x build-r8152-2.06.0_u60.sh
./build-r8152-2.06.0_u60.sh

Name		Name	Last commit message	Last commit date
Latest commit History 44 Commits
2.05.0		2.05.0
scripts		scripts
README.md		README.md
compatibility.h		compatibility.h
r8152.c		r8152.c

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

USB NIC Driver for ESXi 5.1/5.5/6.0/6.5/6.7 (Realtek)

Tested Devices

Required Software

Setup

Prepare the build environment

Building the driver

About

Releases

Packages

Languages

gomesjj/r8152

Folders and files

Latest commit

History

Repository files navigation

USB NIC Driver for ESXi 5.1/5.5/6.0/6.5/6.7 (Realtek)

Tested Devices

Required Software

Setup

Prepare the build environment

Building the driver

About

Resources

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages