Add project files

Signed-off-by: Geoff Levand <[email protected]>

README.md

@@ -0,0 +1,113 @@
+# The TDD project
+
+A framework for test driven Linux software development.
+
+## Jenkins Support
+
+For setup see the TDD Jenkins service [README](docker/jenkins/README.md).
+
+### Jenkins Kernel Tests:
+
+![Job Flow](images/kernel-test-flow.png)
+
+### Jenkins Distribution Tests:
+
+![Job Flow](images/distro-test-flow.png)
+
+## tftpd service
+
+The tdd-tftpd service is used in conjunction with a tdd-ipxe image installed
+on remote machines to provide an automated boot mechanism of remote machines
+controlled via Intelligent Platform Management Interface (IPMI) commands.
+
+For setup see the TDD tftpd service [README](docker/tftpd/README.md).
+
+## ipxe Support
+
+Remote machines have a custom [ipxe bootloader](https://ipxe.org) image
+installed. This custom image knows where the tdd-tftpd server is located and
+what files from the server are to be booted on that system.  The system's
+UEFI is then configured to run this custom ipxe bootloader image on boot.
+
+For setup see the TDD ipxe [README](https://github.com/glevand/tdd--ipxe/blob/master/README).
+
+Use commands like to these to build and install:
+
+```sh
+cd src
+make V=1 CROSS_COMPILE=aarch64-linux-gnu- ARCH=arm64 EMBED=tdd-boot-script -j $(getconf _NPROCESSORS_ONLN || echo 1) bin-arm64-efi/snp.efi
+scp bin-arm64-efi/snp.efi root@${remote}:/boot/efi/EFI/ipxe-tdd.efi
+ssh ${tftpd_server} mkdir -p /var/tftproot/${remote}/
+```
+
+## relay service
+
+Once a remote machine has booted it needs to let the master know it is and ready 
+to receive commands, and if the remote machine was configured via DHCP it must 
+provide its IP address to the master.  The tdd-relay server is at a known 
+network location and acts as a message relay server from the remote machine to 
+the master.  If there is a firewall between the master and any remote machines 
+the relay service must accessible from outside the firewall.
+
+For setup see the TDD relay service [README](docker/relay/README.md).
+
+## Build Host Setup
+
+### Host System binfmt support
+
+QEMU user mode emulation is used when cross building root filesystems.  QEMU
+user mode binfmt support needs to be setup on the build host.
+
+#### Debian based systems
+
+For Debian based systems the following packages will install the needed binfmt
+support:
+
+```sh
+sudo apt-get install binfmt-support qemu-user-static
+sudo systemctl restart systemd-binfmt.service
+```
+#### Fedora based systems
+
+For Fedora based systems the following packages will install the needed binfmt
+support:
+
+```sh
+sudo qemu-user qemu-user-binfmt
+sudo systemctl restart systemd-binfmt.service
+```
+#### Other systemd based systems
+
+```sh
+echo ':qemu-aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-aarch64-static:' | sudo tee /etc/binfmt.d/qemu-aarch64.conf > /dev/null
+sudo systemctl restart systemd-binfmt.service
+```
+
+#### To test binfmt installation:
+
+```sh
+$ ls /proc/sys/fs/binfmt_misc
+qemu-aarch64  register  status
+```
+
+### Container and Service Setup
+
+The [docker-build-all.sh](docker/docker-build-all.sh) script will bulid all the 
+TDD containers and can also install and enable the systemd services of those 
+containers that have them.  Individual containers and services can be build 
+and/or setup with the container's build script, 
+[build-jenkins.sh](docker/jenkins/build-jenkins.sh) for example.
+
+## Trouble-shooting
+
+Seen: `Got permission denied while trying to connect to the Docker daemon socket`
+
+Seen: `/var/run/docker.sock: permission denied`
+
+Solution: Add current user to docker group.
+
+***
+
+Seen: `chroot: failed to run command ‘/bin/bash’: Exec format error`
+
+Solution: Install [host binfmt support](https://github.com/glevand/tdd-project#host-system-binfmt-support).

jenkins/jobs/distro/fedora/f28-t88-ks.cfg

@@ -0,0 +1,50 @@
+#version=DEVEL
+ignoredisk --only-use=sdc
+# Partition clearing information
+clearpart --all --initlabel --drives=sdc
+# Use text mode install
+text
+# Use network installation
+url --url="http://10.7.8.51/Fedora-server-28"
+# Keyboard layouts
+keyboard --vckeymap=us --xlayouts=''
+# System language
+lang en_US.UTF-8
+
+# Network information
+network  --bootproto=dhcp --device=enP2p1s0f1 --ipv6=auto --activate
+network  --bootproto=dhcp --device=enP2p1s0f2 --ipv6=auto
+network  --bootproto=dhcp --device=enP2p1s0f3 --ipv6=auto
+network  --bootproto=dhcp --device=enP2p1s0f4 --ipv6=auto
+network  --bootproto=dhcp --device=enP2p1s0f5 --ipv6=auto --activate
+network  --bootproto=dhcp --device=enP6p1s0f1 --ipv6=auto
+network  --bootproto=dhcp --device=enP6p1s0f2 --ipv6=auto
+network  --hostname=localhost.localdomain
+# Root password
+rootpw --iscrypted $6$lMKgWWMW2ORdmzL7$HQKTznJooVSSiE0/2AOkLkw6brrUkRCSvydfN7S98nV81eRb3J0CQ/ZcZEbztJcB0d19K.ZryzhrbJL6imdH/.
+# Run the Setup Agent on first boot
+firstboot --enable
+# Do not configure the X Window System
+skipx
+# System services
+services --enabled="chronyd"
+# System timezone
+timezone America/Los_Angeles --isUtc
+user --groups=docker,wheel --name=tester --password=$6$X9a.a329c6xSGjn4$5u3YAhUipvNgzGNWs3nPQSqPFLq.UTlPK/iHDZ/Xmp2ex7lMGgHH.kKxDWPFZaoKZYoVWNtfGdX59yve8gLgn/ --iscrypted
+# System bootloader configuration
+bootloader --location=mbr --boot-drive=sdc
+
+%packages
+@^server-product-environment
+
+%end
+
+%addon com_redhat_kdump --disable --reserve-mb='128'
+
+%end
+
+%anaconda
+pwpolicy root --minlen=6 --minquality=1 --notstrict --nochanges --notempty
+pwpolicy user --minlen=6 --minquality=1 --notstrict --nochanges --emptyok
+pwpolicy luks --minlen=6 --minquality=1 --notstrict --nochanges --notempty
+%end