Add the Intel NUC13 to the recommended hardware list

This commit adds the Intel NUC13 to the recommended hardware list,
including the hardware end-of-life table. Because the NUC13 uses
the same wireless card as the NUC12, and is very similar in its
hardware apart from the CPU, much of the content is borrowed from
the NUC12 section.

docs/admin/installation/hardware.rst

@@ -449,7 +449,33 @@ NUC before it can be used. We recommend:
 -  1x memory kit of compatible 2x8GB sticks
    -  You can put one 8GB memory stick in each of the servers.
 
-.. _nucc12_recommendation:
+.. _nuc13_recommendation:
+
+Intel 13th-gen NUC
+~~~~~~~~~~~~~~~~~~
+We have tested and can recommend the `Intel NUC13ANHi5 <https://www.asus.com/us/displays-desktops/nucs/nuc-mini-pcs/asus-nuc-13-pro/>`__.
+It provides two M.2 SSD storage options: a 22x80 port for an NVMe drive, and a 
+22x42 port for a SATA drive. It also has a 2.5 inch drive bay for a SATA hard
+drive or SSD (if using this slot, we recommend choosing an SSD).
+
+The NUC13's AX211 wireless hardware is removable. Doing so requires the use of
+a 5mm nut driver. Before installation of the RAM and storage, we recommend that
+you remove the wireless card and disconnect the wireless antennae leads
+from the AX211 component. Be sure to cover the free ends with electrical tape
+after disconnecting them.
+
+.. figure:: ../../images/hardware/nuc13_leads.jpg
+
+  The location of the wireless card within the NUC13
+
+.. note:: The wireless card is located underneath the 22x80 NVMe port
+
+Because of the newer hardware and the drivers required, you will need to use a
+newer Linux kernel than the one that ships by default in the version of Ubuntu
+Server we recommend. To do so, select the "Boot and Install with the HWE
+Kernel" option in the boot menu for Ubuntu Server.
+
+.. _nuc12_recommendation:
 
 Intel 12th-gen NUC
 ~~~~~~~~~~~~~~~~~~
@@ -467,13 +493,13 @@ after disconnecting them.
 
   The location of the wireless card within the NUC12
 
-.. _nuc11_recommendation:
-
 Because of the newer hardware and the drivers required, you will need to use a
 newer Linux kernel than the one that ships by default in the version of Ubuntu
 Server we recommend. To do so, select the "Boot and Install with the HWE
 Kernel" option in the boot menu for Ubuntu Server.
 
+.. _nuc11_recommendation:
+
 Intel 11th-gen NUC
 ~~~~~~~~~~~~~~~~~~
 We have tested and can recommend the `Intel NUC11PAHi3 <https://ark.intel.com/content/www/us/en/ark/products/205033/intel-nuc-11-performance-kit-nuc11pahi3.html>`__.
@@ -733,6 +759,7 @@ For the hardware we recommend, you can find a list of end-of-life dates below:
 ===================  ====================================================
 Hardware             End-of-Life (EOL)                                       
 ===================  ====================================================
+Intel NUC13ANHi5     Not yet confirmed
 Intel NUC12WSKi5     Not yet confirmed
 Intel NUC11PAHi3     June 30, 2025                                       
 Intel NUC10i5FNH     June 25, 2024