Flomesh Service Mesh Docs

📖 This section contains the FSM Docs

🔗 Looking for the main FSM website? Visit FSM

Editing Content

fsm-docs.flomesh.io is a static site. The documentation content needs to be located at content/docs/.

The content served on https://fsm-docs.flomesh.io is served from the latest release on this repo. Most updates should be made only in main and can be previewed at https://fsm-docs.flomesh.io/.

If it's necessary to change published release-specific docs, those changes should be made in the release-specific branch serving those docs. Once configured as described in Adding release-specific docs, PRs to that branch will auto-build just like PRs to main.

References to the fsm branch, fsm version, and pipy version should be parameterized unless they are in a sample output.

To ensure the docs content renders correctly in the theme, each page will need to have front matter metadata. Example front matter:

---
title: "Docs Home"
linkTitle: "Home"
description: "FSM Docs Home"
weight: 1
type: docs
---

Front Matter Notes:

• inclusion of type: docs is important for the theme to properly index the site contents
• the linkTitle attribute allows you to simplify the name as it appears in the left-side nav bar - ideally it should be short and clear - whereas the title can handle long form names for pages/documents.

Adding release-specific docs

Create a release branch

Look for a branch in the upstream repo named release-vX.Y, where X and Y correspond to the major and minor version of the new release. For example, release-v0.8. If the branch already exists, move to the next step.

Identify the base commit in the main branch for the release and cut a release branch off main.

Note: Care must be taken to ensure the release branch is created from a commit meant for the release. If unsure about the commit to use to create the release branch, please open an issue in the fsm repo and a maintainer will assist you with this.

git checkout -b release-<version> <commit-id> # ex: git checkout -b release-v1.1 0d05587

Push the release branch to the upstream repo (NOT forked), identified here by the upstream remote.

git push upstream release-<version> # ex: git push upstream release-v1.4

Update the release references

Proceed with the following steps once the release branch has been created in the FSM repo.

1. Create a new branch off of the release branch to maintain updates specific to the new version. Let's call it the patch branch. The patch branch should not be created in the upstream repo.

2. On the patch branch, update the fsm_branch, fsm_version, and pipy_version in config.toml to the new release versions.

   fsm_branch = "release-v0.8"
   fsm_version = "v1.9.0"
   pipy_version = "0.90.1-87"

3. Create a pull request from the patch branch to the release branch. Proceed to the next step once the pull request is approved and merged.

After cutting the FSM release

1. Open an issue in this repo asking for a new DNS record be added to the site (via Netlify), to assign a subdomain to the deployed branch.
2. When published, the newly-added branch will function like https://fsm-docs.flomesh.io/

After publishing the new release-specific docs

Update the release branch

1. Create another patch branch off of the release branch (or use the existing patch branch after fetching and rebasing on the release branch).

2. On the patch branch, add the new release as a version parameter in config.toml with the latest tag. The version parameters represent all currently supported versions of FSM and are used to populate the Release drop down menu on the site. The url for the new release is formatted https://release-vX-Y.docs.openservicemesh.io/.

   [[params.versions]]
       version = "v0.8 (latest)"
       url = "https://release-v0-8.docs.openservicemesh.io/"

3. Create a pull request from the patch branch to the release branch. Proceed to the next step once the pull request is approved and merged.

Update main and previous release branches

1. Update the redirects in netlify.toml on the main branch to redirect https://fsm-docs.flomesh.io/ to https//release-vX-Y.docs.openservicemesh.io/ where release-vX-Y is the newest release.
2. Each previous release-specific site that is still supported needs to be able to access the latest release from the Release drop down. On the previous release branches, update the config.toml to list the new release version as shown above.
3. The latest tag must be removed from all previous versions. For example, the latest tag must be removed from v0.7 (latest) on the release-v0.7 branch.
4. Update the version banner parameter in config.toml to enable the banner at the top of each previous release-specific site that will tell visitors which version they are looking at. For example, the version banner for release-v1-1 would be configured as follows:

   [params.versionbanner]
       show = true
       archive = "v1.1"
       latest = "https://release-v1-1.fsm-docs.flomesh.io/"

5. Update content/docs/releases/docs.md to include the new release and update the inactive releases list.

Update the release support matrix

Once a new FSM version has been released, update the FSM and Kubernetes support matrix. The Kubernetes version support will be the current releases of Kubernetes at the time of the FSM release.

Copy files for localization

Copy entire directory structure under content/en to each other localization directory, such as content/zh. Each file in each localization must be individually translated for a given release. For more details on the translation process, see Localization.

Localization

The FSM docs can be translated into multiple localizations. To ensure the most accurate content, each localization must be translated for every release and each file should be manually translated for a given localization. When a new release is published, the English version of every content file for that release is copied to each localization. Those temporary English files can then be individually translated.

If you find a technical error in the content, file a PR to the English version of the content file in the main branch so that the fix is carried forward into future releases. Localized content for a release is not carried forward into the next release so any fixes applied directly to localized content will be lost.

Localizing a file

To localize one or more files:

• Create a new branch off of the latest release branch, such as release-v1.1.
• Translate the temporary English version of the file(s) in the existing localization directory, such as content/zh/_index.md.
• File a PR targeting the latest release branch.

Adding a new localization

When you add a new localization, you need to create BOTH an initial translation for the latest release as well as the scaffold for the new localization in the main branch.

To create the initial translation for the latest release:

• Create a branch based on the latest release branch, such as release-v1.1.
• Add a new localization directory to the content/ directory.
• Copy the entire directory structure under content/en to the new localization directory.
• Add a new language to config.toml in the [languages] section.
• Optionally, you can begin translating one or more files in the new localization directory.
• File a PR targeting the latest release branch.

To create the scaffold for the new localization:

• Create a branch based on main.
• Add the same localization directory to the content/ directory, but only containing a .gitkeep file.
• Copy the new language configuration to config.toml in the [languages] section, but comment it out.
• File a PR targeting the main branch.

Site Development

Notes

• built with the Hugo static site generator
• custom theme uses Docsy as a base, with Bootstrap as the underlying css framework and some FSM custom sass
• deployed to Netlify via merges to main. (@flynnduism can grant additional access to account)
• metrics tracked via Google Analytics

Install dependencies:

• Hugo installation guide
• NPM packages are installed by running yarn. Install Yarn if you need to.

Run the site:

// install npm packages
yarn

// rebuild the site (to compile latest css/js)
hugo

// or serve the site for local dev
hugo serve

Deploying the site:

hugo serve will run the site locally at localhost:1313