Skip to content

fbm3307/host-operator

 
 

Repository files navigation

Host Operator

Go Report Card GoDoc Codecov.io Operator CD Docker Repository on Quay

This is the CodeReady Toolchain Host Operator repository. It contains the OpenShift Operator that is deployed on the "host" cluster in the SaaS.

Build

Requires Go version 1.20.x (1.20.11 or higher) - download for your development environment here.

This repository uses Go modules.

Development

The dev.mk targets in the toolchain-e2e repository can be used to build and deploy the host and member operators for development, or use the guide- https://github.com/codeready-toolchain/toolchain-e2e/blob/master/dev_install.adoc

Releasing operator

The releases of the operator are automatically managed via GitHub Actions workflow defined in this repository.

Broken release

If there is any broken release that cannot be built & pushed through the pipeline - for example because of this error:

Invalid bundle toolchain-host-operator.v0.0.321-147-commit-477c4b7-5e49228, bundle specifies a non-existent replacement toolchain-host-operator.v0.0.320-146-commit-f46a8aa-8f94bc0

then the release has to be fixed manually. In such a case, please follow these steps:

Note
If the problem occurred when releasing registration-service, then don’t do anything in the host-operator, but follow the steps in registration-service repo.
  1. Log in to quay.io using an account that has the write permissions in quay.io/codeready-toolchain/host-operator repo.

  2. Checkout to the problematic (missing) commit that failed in the pipeline and that has to be manually released.

  3. Run make docker-push QUAY_NAMESPACE=codeready-toolchain

  4. Run make push-to-quay-staging QUAY_NAMESPACE=codeready-toolchain

End-to-End tests

Background & pairing

E2E tests are not located in this repository - all e2e tests are in toolchain-e2e repo, however, it’s still possible to run them locally from this repo - see Running End-to-End Tests.

When there is a change introduced in this repository that should be either covered by e2e tests or requires changes in the already existing tests, then all needed changes should go into the toolchain-e2e repo. The logic that executes tests in openshift-ci automatically tries to pair PR opened for this (host-operator) repository with a branch that potentially exists in the developer’s fork of the toolchain-e2e repo. This pairing is based on a branch name.

For example, if a developer with GH account cooljohn opens a PR (for host-operator repo) from a branch fix-reconcile, then the logic checks if there is a branch fix-reconcile also in the cooljohn/toolchain-e2e fork. If there is, then the logic:

  1. clones latest changes from codeready-toolchain/toolchain-e2e

  2. fetches the fix-reconcile branch from cooljohn/toolchain-e2e fork

  3. merges master branch with the changes from fix-reconcile branch

  4. clones latest changes from member-operator repo and builds & deploys the member-operator image out of it

  5. builds & deploys the host-operator image from the code that is in the PR

  6. runs e2e tests against both operators from the merged branch of the toolchain-e2e repo

If the branch with the same name does not exist, then it only clones the latest changes from toolchain-e2e and runs e2e tests from the master.

If you still don’t know what to do with e2e tests in some use-cases, go to What to do section where all use-cases are covered.

Prerequisites if running locally

Running End-to-End Tests

Although the e2e tests are in the separated repository, it’s still possible to run them from this repo (host-operator) and also against the current code that is at HEAD. There are two Makefile targets that will execute the e2e tests:

  • make test-e2e - this target clones latest changes from toolchain-e2e and runs e2e tests for both operators from the master. As deployment for host-operator it uses the current code that is at HEAD.

  • make test-e2e-local - this target doesn’t clone anything, but it runs run e2e tests for both operators from the directory ../toolchain-e2e. As deployment for host-operator it uses the current code that is at HEAD.

The tests executed within toolchain-e2e repo will take care of creating all needed namespaces with random names (or see below for enforcing some specific namespace names). It will also create all required CRDs, role and role bindings for the service accounts, build the Docker images for both operators and push them to the OpenShift container registry. Finally, it will deploy the operators and run the tests using the operator-sdk.

NOTE: you can override the default namespace names where the end-to-end tests are going to be executed - eg.: `make test-e2e HOST_NS=my-host MEMBER_NS=my-member` file.
What to do

If you are still confused by the e2e location, execution and branch pairing, see the following cases and needed steps:

  • Working locally:

    • Need to test your code using the latest version of e2e tests from toolchain-e2e repo:

      • execute make test-e2e

    • Need to test your code using e2e tests located in ../toolchain-e2e repo:

      • make test-e2e-local

  • Creating a PR:

    • Your PR doesn’t need any changes in toolchain-e2e repo:

      • 1. check the name of a branch you are going to create a PR for

      • 2. make sure that your fork of toolchain-e2e repo doesn’t contain branch with the same name

      • 3. create a PR

    • Your PR requires changes in toolchain-e2e repo:

      • 1. check the name of a branch you are going to create a PR for

      • 2. create a branch with the same name within your fork of toolchain-e2e repo and put all necessary changes there

      • 3. push all changes into both forks of the repositories toolchain-e2e and host-operator

      • 4. create a PR for host-operator

      • 5. create a PR for toolchain-e2e

About

CodeReady Toolchain Host Operator

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Go 97.7%
  • Makefile 1.3%
  • Other 1.0%