This is mbedtls for ESP32 / bare-metal Rust.
It comes with mbedtls precompiled to avoid the need for a complete C toolchain. See build_mbedtls for how it was built.
This should work together with esp-wifi. It currently won't work without. However it's not well tested yet besides the included examples.
In general this is heavy in terms of heap memory used and code size. If you can, you should prefer using something like embedded-tls.
For now it's missing advanced configuration options which will be added step-by-step.
The examples use one hard-coded address of www.google.com which might not always work.
These examples use certificates that expire after a given time.
The script genssl.sh is there to renew expired certificates, without having to manually update them within the code.
Examples are available for:
- esp32
- esp32c3
- esp32s2
- esp32s3
To run examples, you need to specify the architecture as a feature, the example name, the target and the toolchain.
You also need to set SSID and PASSWORD as your environment variables
Xtensa:
SSID=<your_ssid> PASSWORD=<your_password> cargo +esp run --release --example sync_client -F esp32s3 --target xtensa-esp32s3-none-elfRISC-V:
SSID=<your_ssid> PASSWORD=<your_password> cargo +nightly run --release --example async_client -F esp32c3,async --target riscv32imc-unknown-none-elfHere's a table of the architectures with their corresponding target for quick reference:
| Architecture | Target | Toolchain |
|---|---|---|
| esp32 | xtensa-esp32-none-elf | esp |
| esp32c3 | riscv32imc-unknown-none-elf | nightly |
| esp32s2 | xtensa-esp32s2-none-elf | esp |
| esp32s3 | xtensa-esp32s3-none-elf | esp |
Heres's a list of all the examples with their description, and the required features to enable them:
| Example | Features | Description |
|---|---|---|
| async_client | - | Example of a HTTPS connection using the async client. |
| async_client (with mTLS) | mtls | Example of a HTTPS connection using the async client, with certificate authentication. This sends client certificates to a server, and the response indicates informations about the certificates. |
| sync_client | - | Example of a HTTPS connection using the sync client. |
| sync_client (with mTLS) | mtls | Example of a HTTPS connection using the sync client, with certificate authentication. This sends client certificates to a server, and the response indicates informations about the certificates. |
| async_server | - | Example of a simple async server with HTTPS support. This uses self-signed certificates, so you will need to enable an exception in your browser. |
| async_server (with mTLS) | mtls | Example of a simple async server with HTTPS support, with client authentication. You will need to pass client certificates in your request in order to have a successful connection. Refer to the documentation inside the example. |
| sync_server | - | Example of a simple sync server with HTTPS support. This uses self-signed certificates, so you will need to enable an exception in your browser. |
| sync_server (with mTLS) | mtls | Example of a simple sync server with HTTPS support, with client authentication. You will need to pass client certificates in your request in order to have a successful connection. Refer to the documentation inside the example. |
This needs espflash version 2.x. If you are using version 1.x you need to remove the flash command from the runner in .cargo/config.toml
Licensed under either of:
- Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.