Merge remote-tracking branch 'upstream/bugfix-2.0.x' into bugfix-2.0.x

.github/issue_template.md

@@ -1,6 +1,6 @@
 <!--
 
-Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/master/.github/code_of_conduct.md
+Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/bugfix-2.0.x/.github/code_of_conduct.md
 
 Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/.
 

.gitignore

@@ -171,3 +171,13 @@ CMakeListsPrivate.txt
 
 #CLion
 cmake-build-*
+
+#Eclipse
+.project
+.cproject
+.pydevproject
+.settings
+.classpath
+
+#Python
+__pycache__

.travis.yml

@@ -1,4 +1,4 @@
-dist: trusty
+dist: xenial
 sudo: require
 
 language: python
@@ -38,7 +38,7 @@ before_install:
 
 install:
   #- pip install -U platformio
-  - pip install -U https://github.com/platformio/platformio-core/archive/develop.zip
+  - pip install -U https://github.com/platformio/platformio-core/archive/master.zip
 
 before_script:
   # Update PlatformIO packages

Marlin/Makefile

@@ -229,6 +229,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),443)
 else ifeq ($(HARDWARE_MOTHERBOARD),243)
 # Creality: CR10S, CR20, CR-X
 else ifeq ($(HARDWARE_MOTHERBOARD),244)
+# Dagoma F5
+else ifeq ($(HARDWARE_MOTHERBOARD),245)
 # Fysetc F6
 else ifeq ($(HARDWARE_MOTHERBOARD),541)
 # Duplicator i3 Plus
@@ -237,6 +239,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),31)
 else ifeq ($(HARDWARE_MOTHERBOARD),441)
 # TRONXY V3 1.0
 else ifeq ($(HARDWARE_MOTHERBOARD),442)
+# Z-Bolt X Series
+else ifeq ($(HARDWARE_MOTHERBOARD),550)
 
 #
 # Other ATmega1280, ATmega2560
@@ -271,7 +275,7 @@ else ifeq ($(HARDWARE_MOTHERBOARD),304)
 # Einsy Retro
 else ifeq ($(HARDWARE_MOTHERBOARD),305)
 # Elefu Ra Board (v3)
-else ifeq ($(HARDWARE_MOTHERBOARD),21)
+else ifeq ($(HARDWARE_MOTHERBOARD),23)
 # Leapfrog
 else ifeq ($(HARDWARE_MOTHERBOARD),999)
 # Mega controller
@@ -288,6 +292,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),75)
 else ifeq ($(HARDWARE_MOTHERBOARD),76)
 # Geeetech GT2560 Rev B for A20(M/D)
 else ifeq ($(HARDWARE_MOTHERBOARD),86)
+# Einstart retrofit
+else ifeq ($(HARDWARE_MOTHERBOARD),666)
 
 #
 # ATmega1281, ATmega2561
@@ -587,7 +593,7 @@ ifeq ($(U8GLIB), 1)
 endif
 
 ifeq ($(TMC), 1)
-  LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp CHOPCONF.cpp  GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp DRVSTATUS.cpp ENCMODE.cpp  RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
+  LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
 endif
 
 ifeq ($(RELOC_WORKAROUND), 1)

Marlin/src/HAL/HAL_AVR/HAL.cpp

@@ -1,24 +1,24 @@
-/* **************************************************************************
-
- Marlin 3D Printer Firmware
- Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
-
- Copyright (c) 2016 Bob Cousins [email protected]
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-****************************************************************************/
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
 
 #ifdef __AVR__
 

Marlin/src/HAL/HAL_AVR/HAL.h

@@ -24,14 +24,7 @@
 
 #include <stdint.h>
 
-#include <Arduino.h>
-
-#include <util/delay.h>
-#include <avr/eeprom.h>
-#include <avr/pgmspace.h>
-#include <avr/interrupt.h>
-#include <avr/io.h>
-
+#include "../shared/Marduino.h"
 #include "../shared/HAL_SPI.h"
 #include "fastio_AVR.h"
 #include "watchdog_AVR.h"
@@ -43,6 +36,12 @@
   #include "MarlinSerial.h"
 #endif
 
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+#include <avr/io.h>
+
 // --------------------------------------------------------------------------
 // Defines
 // --------------------------------------------------------------------------

Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp

@@ -21,12 +21,12 @@
  */
 
 /**
- * Originally from Arduino Sd2Card Library
+ * Adapted from Arduino Sd2Card Library
  * Copyright (C) 2009 by William Greiman
  */
 
 /**
- * Description: HAL for AVR - SPI functions
+ * HAL for AVR - SPI functions
  */
 
 #ifdef __AVR__
@@ -37,36 +37,25 @@
 
 #include "../../inc/MarlinConfig.h"
 
-// --------------------------------------------------------------------------
-// Public Variables
-// --------------------------------------------------------------------------
-
-
-// --------------------------------------------------------------------------
-// Public functions
-// --------------------------------------------------------------------------
-
-void spiBegin (void) {
-  SET_OUTPUT(SS_PIN);
-  WRITE(SS_PIN, HIGH);
+void spiBegin(void) {
+  OUT_WRITE(SS_PIN, HIGH);
   SET_OUTPUT(SCK_PIN);
   SET_INPUT(MISO_PIN);
   SET_OUTPUT(MOSI_PIN);
 
   #if DISABLED(SOFTWARE_SPI)
     // SS must be in output mode even it is not chip select
-    SET_OUTPUT(SS_PIN);
+    //SET_OUTPUT(SS_PIN);
     // set SS high - may be chip select for another SPI device
-    #if SET_SPI_SS_HIGH
-      WRITE(SS_PIN, HIGH);
-    #endif  // SET_SPI_SS_HIGH
+    //#if SET_SPI_SS_HIGH
+      //WRITE(SS_PIN, HIGH);
+    //#endif
     // set a default rate
     spiInit(1);
-  #endif  // SOFTWARE_SPI
+  #endif
 }
 
-
-#if DISABLED(SOFTWARE_SPI)
+#if DISABLED(SOFTWARE_SPI, FORCE_SOFT_SPI)
 
   //------------------------------------------------------------------------------
   // Hardware SPI
@@ -190,22 +179,26 @@ void spiBegin (void) {
   }
 
 
-#else
+#else // SOFTWARE_SPI || FORCE_SOFT_SPI
+
+  //------------------------------------------------------------------------------
+  // Software SPI
+  //------------------------------------------------------------------------------
 
-  /** nop to tune soft SPI timing */
+  // nop to tune soft SPI timing
   #define nop asm volatile ("\tnop\n")
 
-  /** Set SPI rate */
+  // Set SPI rate
   void spiInit(uint8_t spiRate) {
     UNUSED(spiRate);  // nothing to do
   }
 
-  /** Begin SPI transaction, set clock, bit order, data mode */
+  // Begin SPI transaction, set clock, bit order, data mode
   void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
     UNUSED(spiBeginTransaction);  // nothing to do
   }
 
-  /** Soft SPI receive byte */
+  // Soft SPI receive byte
   uint8_t spiRec() {
     uint8_t data = 0;
     // no interrupts during byte receive - about 8µs
@@ -230,13 +223,13 @@ void spiBegin (void) {
     return data;
   }
 
-  /** Soft SPI read data */
+  // Soft SPI read data
   void spiRead(uint8_t* buf, uint16_t nbyte) {
     for (uint16_t i = 0; i < nbyte; i++)
       buf[i] = spiRec();
   }
 
-  /** Soft SPI send byte */
+  // Soft SPI send byte
   void spiSend(uint8_t data) {
     // no interrupts during byte send - about 8µs
     cli();
@@ -257,13 +250,13 @@ void spiBegin (void) {
     sei();
   }
 
-  /** Soft SPI send block */
+  // Soft SPI send block
   void spiSendBlock(uint8_t token, const uint8_t* buf) {
     spiSend(token);
     for (uint16_t i = 0; i < 512; i++)
       spiSend(buf[i]);
   }
 
-#endif // SOFTWARE_SPI
+#endif // SOFTWARE_SPI || FORCE_SOFT_SPI
 
 #endif // __AVR__

Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp

@@ -739,24 +739,24 @@
 
 #endif // !USBCON && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
 
+#ifdef INTERNAL_SERIAL_PORT
 
-#if defined(INTERNAL_SERIAL_PORT)
-
-    ISR(SERIAL_REGNAME(USART,INTERNAL_SERIAL_PORT,_RX_vect)) {
-      MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>::store_rxd_char();
-    }
+  ISR(SERIAL_REGNAME(USART,INTERNAL_SERIAL_PORT,_RX_vect)) {
+    MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>::store_rxd_char();
+  }
 
-    ISR(SERIAL_REGNAME(USART,INTERNAL_SERIAL_PORT,_UDRE_vect)) {
-      MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>::_tx_udr_empty_irq();
-    }
+  ISR(SERIAL_REGNAME(USART,INTERNAL_SERIAL_PORT,_UDRE_vect)) {
+    MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>::_tx_udr_empty_irq();
+  }
 
-    // Preinstantiate
-    template class MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>;
+  // Preinstantiate
+  template class MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>;
 
-    // Instantiate
-    MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>> internalSerial;
+  // Instantiate
+  MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>> internalSerial;
 
 #endif
+
 // For AT90USB targets use the UART for BT interfacing
 #if defined(USBCON) && ENABLED(BLUETOOTH)
   HardwareSerial bluetoothSerial;

Marlin/src/HAL/HAL_AVR/MarlinSerial.h

@@ -276,7 +276,7 @@
 #endif // !USBCON
 
 
-#if defined(INTERNAL_SERIAL_PORT)
+#ifdef INTERNAL_SERIAL_PORT
   template <uint8_t serial>
   struct MarlinInternalSerialCfg {
     static constexpr int PORT               = serial;

Marlin/src/HAL/HAL_AVR/SanityCheck.h

@@ -46,8 +46,8 @@
  * Sanity checks for Spindle / Laser
  */
 #if ENABLED(SPINDLE_LASER_ENABLE)
-  #if !PIN_EXISTS(SPINDLE_LASER_ENABLE)
-    #error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN."
+  #if !PIN_EXISTS(SPINDLE_LASER_ENA)
+    #error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENA_PIN."
   #elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
     #error "SPINDLE_DIR_PIN not defined."
   #elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)

Marlin/src/HAL/HAL_AVR/ServoTimers.h

@@ -75,16 +75,16 @@
 #endif
 
 typedef enum {
-  #if ENABLED(_useTimer1)
+  #ifdef _useTimer1
     _timer1,
   #endif
-  #if ENABLED(_useTimer3)
+  #ifdef _useTimer3
     _timer3,
   #endif
-  #if ENABLED(_useTimer4)
+  #ifdef _useTimer4
     _timer4,
   #endif
-  #if ENABLED(_useTimer5)
+  #ifdef _useTimer5
     _timer5,
   #endif
   _Nbr_16timers