This README file contains information on the contents of the
meta-darpahackfest layer.

Please see the corresponding sections below for details.


Dependencies
============

This layer depends on:

  URI: git://git.openembedded.org/bitbake
  branch: master

  URI: git://git.openembedded.org/meta-openembedded
  layers: meta, meta-oe, meta-multimedia, meta-networking, meta-python, meta-filesystems
  branch: master

  URI: git://git.yoctoproject.org/poky
  branch: rocko
  
  URI: git://git.yoctoproject.org/meta-raspberrypi
  branch: master
  
  URI: git://git.yoctoproject.org/meta-qt4
  branch: rocko
  
  URI: git://github.com/balister/meta-sdr
  branch: master





Table of Contents
=================

  I. Adding the meta-darpahackfest layer to your build
 II. Misc


I. Adding the meta-darpahackfest layer to your build
=================================================

--- replace with specific instructions for the meta-darpahackfest layer ---

In order to use this layer, you need to make the build system aware of
it.

Assuming the meta-darpahackfest layer exists at the top-level of your
yocto build tree, you can add it to the build system by adding the
location of the meta-darpahackfest layer to bblayers.conf, along with any
other layers needed. e.g.:

  BBLAYERS ?= " \
    /path/to/yocto/meta \
    /path/to/yocto/meta-poky \
    /path/to/yocto/meta-yocto-bsp \
    /path/to/yocto/meta-meta-darpahackfest \
    /path/to/yocto/meta-sdr \
    /path/to/yocto/meta-raspberrypi \
    /path/to/yocto/meta-qt4 \
    /path/to/yocto/meta-openembedded/meta-networking \
    /path/to/yocto/meta-openembedded/meta-python \
    /path/to/yocto/meta-openembedded/meta-oe \
    /path/to/yocto/meta-openembedded/meta-filesystems \
    "



II. Misc
========

This layer is used for building images for the DARPA Bay Area Hackfest Event.  It is intened to target a RPi3 using 64bit.  Please follow the instructios at with meta-raspberrypi for configuartion to build for the RPi3.  After configuring bblayers and local.conf for your build area build the image using:
bitbake darapahackfest-dev-image
This will create a .sdimg which can be copied to a sdcard using bmaptools

also read yocto_build_steps to see an example of the buildsteps for a hackfest computer

see:
https://wiki.gnuradio.org/index.php/Embedded_Development_with_GNU_Radio
for more information about using openembedded with GNU Radio