This is a repo containing STL files for 3D printing components required to modify an iMac G3 with tray loading drive. This is opposed to the slot-load drive iMac introduced later in the G3 generation. This repo is inspired by https://github.com/Diepzeevogel/iMac-G3-replacement-parts for uploading the parts he used for his project.
I'm not yet done with the mod so these may change and I will try to update them as I make updates.
Additional parts taken from other repos
200mm fan mounts. I modified the piece that screws into the shell by reducing the distance to 11mm. You can find the adjusted one in this repo. The fan mount pieces work perfectly. https://github.com/Diepzeevogel/iMac-G3-replacement-parts/tree/master/Mounts/200mm%20fan
SFX PSU Vega Mount https://github.com/Diepzeevogel/iMac-G3-replacement-parts/tree/master/Mounts/SFX%20PSU%20to%20VESA
LCD Screen Mounts https://github.com/Diepzeevogel/iMac-G3-replacement-parts/tree/master/Mounts
MicroATX Motherboard Mount that I glued to the ramps in this repo. Note, you can get a miniItx mount from Diepzeevogel's repo if you wish and you can tweak the ramp to 170mm in length or just print as-is and leave extra space on the ramp. https://www.thingiverse.com/thing:5155837