clean up keymap

README.md

@@ -2,65 +2,6 @@
 
 This is a repository for a ZMK Firmware for Ergonaut One keyboard.
 
-## Default keymap
-
-Visual representation of the default keymap in keyboard-layout-editor: [KLE](http://www.keyboard-layout-editor.com/#/gists/13d0f7ae7a8b5835efcd23d61f50336a)
-
-Below representation was generated with [`keymap-drawer`](https://github.com/caksoylar/keymap-drawer) – check out the automatically generated layouts using the [automated Github workflow](https://github.com/caksoylar/keymap-drawer/tree/main#setting-up-an-automated-drawing-workflow) for each keyboard in the [`keymap-drawer` folder](keymap-drawer/), which is always up to date with the config.
+## Keymap
 
 ![Keymap Representation](./keymap-drawer/ergonaut_one.svg?raw=true "Keymap Representation")
-
-This layout is heavily inspired from [Watchman 42-key layout](https://github.com/aroum/Watchman-layouts)
-
-## FAQ
-
-- [FAQ](#faq)
-  - [How to change the keymap?](#how-to-change-the-keymap)
-  - [How to flash the keyboard?](#how-to-flash-the-keyboard)
-  - [How to pair halves?](#how-to-pair-halves)
-  - [Problems](#problems)
-    - [I'm getting File Transfer Error after copying firmware to the keyboard](#im-getting-file-transfer-error-after-copying-firmware-to-the-keyboard)
-
-### How to change the keymap?
-
-1. Fork or use this repository as a template https://github.com/ergonautkb/one-zmk-config.
-2. Enable Github Actions for your repository.
-
-You have two options on how to configure your desired keymap:
-
-#### Option 1. Keymap Editor
-
-1. Open [Keymap Editor](https://nickcoutsos.github.io/keymap-editor/).
-2. Connect it to your Github account and give an access to your repository to Keymap Editor's app.
-3. Make changes to your keymap and press `Save` - it will trigger software build. Wait for it to complete.
-4. Grab the `firmware.zip` archive.
-
-#### Option 2. Manual
-
-1. Make changes to the [ergonaut_one.keymap](config/boards/shields/ergonaut_one/ergonaut_one.keymap) file using your favorite text editor.
-2. Commit changes to your repository.
-3. Go to `Actions` tab in your Github repository, locate the latest build and wait for it to complete.
-4. Grab the `firmware.zip` archive
-
-### How to flash the keyboard?
-
-1. Obtain `firmware.zip`
-2. Unzip `firmware.zip` - you should have `ergonaut_one_left-seeeduino_xiao_ble-zmk.uf2` and `ergonaut_one_right-seeeduino_xiao_ble-zmk.uf2` files
-3. Turn off the power for selected halve (move slider to position `OFF`)
-4. Connect selected halve to the PC via USB-C cable
-5. Press `RESET` button **twice** to enter DFU mode - you should see new USB device in your file manager
-6. Copy the corresponding firmware to the root directory of the new USB device
-7. Disconnect selected halve from the PC
-8. Repeat steps 3-7 for the other halve
-
-### How to pair halves?
-
-1. Turn off the power for both halves (move slider to position `OFF`)
-2. Turn on the power for both halves (move slider to position `ON`)
-3. Press `RESET` button **once** on both halves **simultaneously**
-
-### Problems
-
-#### I'm getting File Transfer Error after copying firmware to the keyboard
-
-It's OK. Proof: https://zmk.dev/docs/troubleshooting#file-transfer-error