3.0.3

I am pleased to announce the latest maintenance release of Corosync-Qdevice 3.0.3 available immediately from GitHub at https://github.com/corosync/corosync-qdevice/releases as corosync-qdevice-3.0.3.

This release fixes bug which made qdevice crash (abrt) when no network interfaces other than loopback exists. This bug was introduced in version 3.0.1. Version 3.0.0 and previous versions shipped within corosync package are not affected.

Complete changelog for 3.0.3:

Jan Friesse (1):
      qdevice: Destroy non blocking client on failure

Upgrade is highly recommended.

Thanks/congratulations to all people that contributed to achieve this great milestone.

3.0.2

I am pleased to announce the latest maintenance release of Corosync-Qdevice 3.0.2 available immediately from GitHub at https://github.com/corosync/corosync-qdevice/releases as corosync-qdevice-3.0.2.

This release contains important bug fixes.

Complete changelog for 3.0.2:

Jan Friesse (6):
      qnetd: Don't alloc host_addr
      tests: Enhance test-timer-list
      tests: Fix test-timer-list NULL check
      timer-list: Use correct english term children
      unix-socket: Check minimal length of socket path
      configure: Modernize configure.ac a bit

liangxin1300 (2):
      qnetd: sort by node_id when add new client
      man: replace votequorum_poll for actually used fn

Upgrade is highly recommended.

Thanks/congratulations to all people that contributed to achieve this great milestone.

3.0.1

I am pleased to announce the latest maintenance release of Corosync-Qdevice 3.0.1
available immediately from GitHub at https://github.com/corosync/corosync-qdevice/releases as corosync-qdevice-3.0.1.

This release contains important bug fixes and some of new features. Most notable ones:

• Rewrite of DPD (dead-peer-detection) timer. Previously dead peer detection
  was implemented sub-optimally and may result in QNetd waiting too long
  before marking Qdevice peer dead and selecting new quorate partition what
  made Qdevice not responsible for corosync votequorum service resulting in
  lost of quorum. New implementation is using smaller timeouts and no sampling
  (global DPD timer) so QNetd detects dead peer long time before sync_timeout.
  Configuration option dpd_interval is removed (no longer needed) and replaced
  by dpd_interval_coefficient (see corosync-qnetd(8) for more details). This fixes
  GH issue #10.
• Implement KAP Tie-breaker (keep active partition) for ffsplit algorithm.
  This solves problem when Corosync creates single node partition during
  startup and for two node clusters with ffsplit this new node might get vote
  eventho there was already other quorate node. This option is enabled by
  default. To use previous behavior it's possible to set
  keep_active_partition_tie_breaker in corosync.conf (see corosync-qdevice(8)
  for more details). Fix for GH issue #7.
• Qdevice systemd unit file now restarts on-failure.
• Configurations without ring0_addr are now properly supported. Fixes GH issue
  #16.

Complete changelog for 3.0.1:

Fabio M. Di Nitto (1):
      devel: add corosync-qdevice.pc file for pcs to use

Jan Friesse (79):
      qnetd: Check existence of NSS DB dir before fork
      spec: Use install -p and add license
      man: Fix corosync-qdevice default connect_timeout
      configure: Add user-flags configure option
      qdevice: Fix qdevice_heuristics_destroy error
      qnetd: Rename qnetd-log.c to log.c
      qnetd: Fix double -d description
      qnetd: Check log initialization error
      qnetd: Add function to set log target
      qdevice: Use log instead of libqb log
      qdevice: Import log instead of qdevice-log
      qdevice: Merge msg_decode_error functions
      qnetd: Use log-common for nodelist debug dump
      qdevice: Configurable log priority bump
      tests: Add utils_parse_bool_str test
      qdevice: Free memory used by log
      qdevice: Add log test
      qdevice: Add header files to list of test sources
      qdevice: Add chk variant of vsyslog to test-log
      qdevice: Add prototype of __vsyslog_chk
      build: Update git-version-gen
      build: Use git-version-gen during specfile build
      configure: Use default systemd path with prefix
      pr-poll-loop: Add main poll loop based on PR_Poll
      qnetd: Migrate main loop to pr-poll-loop
      qnetd: Do not call ffsplit_do on shutdown
      qdevice: Use EXIT_SUCCESS and EXIT_FAILURE codes
      qdevice: Add space before bracket
      qdevice: Fix connect heuristics result callback
      pr-poll-loop: Do not add FD when events is empty
      tests: Add pr-poll-loop test
      tests: Enhance pr-poll-loop test
      heuristics: Remove qdevice instance pointer
      pr-poll-loop: Return error code if PR_Poll fails
      qdevice: Initial port to use pr-poll-loop
      qnetd: Remove write callback on listening sockets
      qnetd: Remove unneeded pprio include
      qnetd: Log pr_poll_loop_add,del errors properly
      qnetd: Move pr_poll_loop_exec call to function
      pr-poll-loop: Add support for PR_POLL_EXCEPT
      pr-poll-loop: Pass PRPollDesc for prfd events
      pr-poll-loop: Add pre poll callbacks
      qdevice: Fix connect heuristics result callback
      pr-poll-loop: Fix set_events_cb return code
      qnetd: Return error code based on ipc closed
      qdevice-net: Log adds newline automatically
      qdevice: Port qdevice to use pr-poll-loop
      qdevice-votequorum: Fix typo in log message
      qnetd: Fix dpd timer
      timer-list: Return error on adding NULL callback
      timer-list: Add test
      README: Fix typos
      qnetd: Add support for keep active partition vote
      LICENSE: Update copyright date
      qdevice: Fix set option and set option reply
      qdevice-net-heuristics: Fix log message
      qnetd: Fix NULL dereference of client
      qnet: Add support for keep active partition vote
      qdevice-ipc: Fix dereference bug
      pr-poll-loop: Add queue header include
      timer-list: Implement heap based timer-list
      msg: Check cat result on adding msg type and size
      test-process-list: Fix few bugs
      tlv: Check dynar_cat result
      test-timer-list: Ignore poll errors
      timer-list: Improve efficiency of delete operation
      tests: Fix assert problems
      qdevice-net-ipc-cmd: Fix compiler warning
      qdevice-cmap: Fix clear high node bit typo
      qdevice-cmap: Load clear node high bit only once
      qdevice: Configuration without nodelist is invalid
      qdevice: Handle configurations without ring0_addr
      utils: Add utils_strtod
      timer-list: Rename delete and reschedule ops
      timer-list: Add functions for get and set interval
      qnet-config: Add space to string concat
      qnetd: Improve dead peer detection
      qnetd-algo-ffsplit: Simplify KAP Tie-breaker logic
      qnetd: Move client schedule disconnect handling

Kumabuchi Kenji (1):
      init: change restart to on-failure for qdevice

liangxin1300 (1):
      qdevice: Change log level to NOTICE on PASS

Upgrade is highly recommended.

Thanks/congratulations to all people that contributed to achieve this great milestone.

3.0.0

I am pleased to announce the first stable release of Corosync-Qdevice 3.0.0 available immediately from GitHub at https://github.com/corosync/corosync-qdevice/releases as corosync-qdevice-3.0.0.

Corosync-qdevice project is split of Corosync qdevice and qnetd daemons found in Corosync Needle since 2.4.0 (but no longer in Corosync Camelback 3).

qdevice and qnetd daemons found in Corosync Needle will be getting backports from Corosync-qdevice project which is now consider primary home for these daemons (so please use Corosync-qdevice project for filling issues/PR).

This release contains just one small fix for warning found by coverity.

Complete changelog for final version (compared to RC 1):

Jan Friesse (1):
      certutils: Fix warnings found by coverity

Thanks/congratulations to all people that contributed to achieve this great milestone.

3.0.0 - RC 1

I am pleased to announce the first release candidate of Corosync-Qdevice 3.0 available immediately from GitHub at https://github.com/corosync/corosync-qdevice/releases as corosync-qdevice-2.93.0.

This release contains mostly small bugfixes.

Complete changelog for RC 1 (compared to Beta 1):

Jan Friesse (11):
      tests: Enlarge timeout for process-list test
      init: disable stderr output in systemd unit file
      spec: Use different BuildRequires for SUSE
      spec: add exlicit docdir
      spec: Autogenerate bcond options based on config
      build: Remove WITH_LIST
      qdevice: Propagate error to exit code
      build: Support for git archive stored tags
      git-version-gen: Fail on UNKNOWN version
      configure: move to AC_COMPILE_IFELSE
      init: Fix init scripts to work with containers

We did our best to test this release as best as we could, but still take it as an Beta version.

Thanks/congratulations to all people that contributed to achieve this great milestone.

3.0.0 - Beta 1

I am pleased to announce the first beta version release of Corosync-Qdevice 3.0 available immediately from GitHub at
https://github.com/corosync/corosync-qdevice/releases as corosync-qdevice-2.92.0.

This release contains mostly bugfixes and support for new NSS database format.

Complete changelog for Beta 1 (compared to Alpha 2):

Jan Friesse (13):
      tests: Fix process-list test to work on FreeBSD
      tests: process-list add stdlib include
      tests: enlarge process-list timeouts
      unix-socket: Fix snprintf warning
      tests: Notify process-list after trap was created
      qdevice-cmap: Fix compiler warning on Sparc/ARM
      gitignore: Add testsuite results
      certutil: Add support for new NSS database format
      qdevice-net-certutil: Implement scp wrapper
      man: Document NSS database conversion
      qnetd-certutil: Add -G option
      config: Remove unneeded qb includes
      spec: Add explicit gcc build dependency

We did our best to test this release as best as we could, but still take it as an Beta version.

Thanks/congratulations to all people that contributed to achieve this
great milestone.

3.0.0 - Alpha 2

I am pleased to announce the second testing (Alpha 2) release of Corosync-Qdevice 3.0 available immediately from GitHub at
https://github.com/corosync/corosync-qdevice/releases as corosync-qdevice-2.91.0.

This release contains mostly bugfixes.

Complete changelog for Alpha 2 (compared to Alpha 1):

Bin Liu (1):
      qdevice: optarg should be str in init_from_cmap

Ferenc Wágner (1):
      Fix typo: sucesfully -> successfully

Jan Friesse (12):
      spec: Modernize spec file a bit
      init: Quote subshell result properly
      Quote certutils scripts properly
      Fix NULL pointer dereference
      Nodelist is set into string not array
      Check if user_data can be dereferenced
      Add safer wrapper of strtoll
      qdevice: Replace strtol by strtonum
      qnetd: Replace strtol by strtonum
      msgio: Fix reading of msg longer than PR_INT32_MAX
      msgio: Remove unused code
      spec: Remove unused clean section

We did our best to test this release as best as we could, but still take it as an Alpha version.

Thanks/congratulations to all people that contributed to achieve this
great milestone.

3.0.0 - Alpha 1

Testing alpha release.