Media player card for Sonos speakers!
- Group/Ungroup speakers
- Control multiple speaker
- Play favorites from list
- Media browser
- Control individual volumes in a group
- Artwork background
- Possibility to override artwork
- Shuffle and repeat mode
- Theming
- Configurable styling
- Dynamic volume level slider
- Track progress bar
and more!
Do you like the Sonos Card? Support the project with a coffee ☕️
This card is available in HACS (Home Assistant Community Store)
Download the resources, as you would do with all other modules.
Add the custom card as a module, like this:
resources:
- url: /local/custom-sonos-card.js?v=1.0
type: moduleBy default, all sections of the card is available and you can jump between them in the footer of the card.
However, you can also select individual sections to enable. Use this if you want to show the different sections next to each (by adding multiple instances of the card with different sections enabled).
By using the section configuration you can utilise the full power of Home Assistant's layout capabilities and also drag in other cards in your Sonos Dashboard view.
Use the Visual Editor in Home Assistant to configure the card. Most options are available there.
type: custom:sonos-card # or one of the individual sections mentioned above
# All settings below are optional
# common for all sections
title: ''
sections: # see explanation further up
- volumes
- groups
- grouping
- media browser
- player
widthPercentage: 75 # default is 100. Use this to change the width of the card.
heightPercentage: 75 # default is 100. Use this to change the height of the card.
entityId: media_player.sonos_bedroom # Forces this player to be the selected one on loading the card (overrides url param etc)
entityNameRegexToReplace: 'SONOS ' # Regex pattern to replace parts of the entity names
entityNameReplacement: ''
entities: # Entities are automatically discovered if you don't supply this setting
- media_player.sonos_kitchen
- media_player.sonos_hallway
- media_player.sonos_bedroom
- media_player.sonos_livingroom
# groups specific
groupsTitle: ''
hideGroupCurrentTrack: true # default is false, which means song/track info for groups will be shown
# groupings specific
groupingTitle: ''
predefinedGroups: # defaults to empty
- name: Inside
entities:
- media_player.matrum
- media_player.hall
# player specific
showVolumeUpAndDownButtons: true # default is false, shows buttons for increasing and decreasing volume
labelWhenNoMediaIsSelected: 'No media selected'
labelForTheAllVolumesSlider: 'All volumes'
mediaArtworkOverrides: # Show your own selected artwork if certain rules match
- mediaTitleEquals: TV
imageUrl: https://cdn-icons-png.flaticon.com/512/716/716429.png
sizePercentage: 40
- mediaContentIdEquals: "x-sonos-htastream:RINCON_949F3EC2E15B01400:spdif"
imageUrl: https://cdn-icons-png.flaticon.com/512/4108/4108783.png
- mediaTitleEquals: p4malmo-aac-192
imageUrl: >-
https://mytuner.global.ssl.fastly.net/media/tvos_radios/2BDTPrpMbn_cTdteqo.jpg
- ifMissing: true # ifMissing will only be used if none of the "Equals" overrides above resulted in a match
imageUrl: https://cdn-icons-png.flaticon.com/512/651/651758.png
customSources: # Main use case is probably to set tv media player to play TV sound
media_player.tv: # set this to 'all' to show the custom source for all players
- title: TV
thumbnail: https://cdn-icons-png.flaticon.com/512/716/716429.png
dynamicVolumeSlider: true # default is false. See more in section further down.
artworkHostname: http://192.168.0.59:8123 #default is ''. Usually not needed, but depending on your setup your device might not be able to access the artwork on the default host. One example where it could be needed is if you cast the dashboard with Google Cast.
# media browser specific
mediaTitle: ''
customThumbnailIfMissing:
Ed Sheeran Radio: https://i.scdn.co/image/ab6761610000e5eb4d2f80ceffc6c70a432ccd7c
Legendary: https://i.scdn.co/image/ab67706f000000027b2e7ee752dc222ff2fd466f
fallback: https://cdn-icons-png.flaticon.com/512/651/651717.png # will use this if thumbnail is missing and none of the above matches. Defaults to black music notes with white background.
mediaBrowserTitlesToIgnore:
- Local Media
- My Bad PlaylistAs mentioned earlier, use the individual sections for more layout flexibility.
Here is an example:
type: horizontal-stack
cards:
- type: custom:sonos-card
sections:
- groups
- grouping
- volumes
widthPercentage: 100
- type: vertical-stack
cards:
- type: entities
entities:
- type: button
tap_action:
action: navigate
navigation_path: /
icon: mdi:arrow-left-circle
name: Back to home
- type: custom:sonos-card
sections:
- player
- type: custom:sonos-card
sections:
- media browserThe following variables are being used and can be set in your theme to change the appearance of the card:
--accent-color
--primary-color
--secondary-text-color
--secondary-background-color
Read more about using theme variables here: https://www.home-assistant.io/integrations/frontend/#defining-themes
The recommend way to change look and feel is to use the built in theming capabilities in Home Assistant. If that is not enough this card supports being styled with card_mod.
Example:
type: custom:sonos-card
card_mod:
style: |
ha-card {
color: white !important;
background: gray;
--accent-color: pink;
--primary-color: white;
--secondary-text-color: white;
--secondary-background-color: pink;
}The above YAML renders the following:
The volume level slider is dynamically adjusting its scale. If volume is below 20% it will show a scale up to 30%. Above 20% it will show a scale up to 100%. The color will also change from green to red clearly indicating which scale is being used.
Enable it in config with dynamicVolumeSlider: true
Append #media_player.my_sonos_player to page URL to have that player selected.
If entityId is configured for the card, the url param will be ignored. See more in the Usage section above.