style(formatting): technical review

docs/components/connectors/protocol/graphql.md

@@ -177,11 +177,11 @@ Variables:
 }
 ```
 
-### Network Communication Timeouts
+### Network communication timeouts
 
-- **Connection timeout in seconds** setting determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
+- **Connection timeout in seconds** determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
 
-- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, you can set this to 0.
+- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, set this to 0.
 
 - **Write timeout in seconds** controls how long the client will wait to successfully send data to the server. The default setting for this is 0, indicating that there is no limit and the client will wait indefinitely for the operation to complete.
 

docs/components/connectors/protocol/rest.md

@@ -167,11 +167,11 @@ Secrets are currently not supported in the body of a **REST Connector**.
 }
 ```
 
-### Network Communication Timeouts
+### Network communication timeouts
 
-- **Connection timeout in seconds** setting determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
+- **Connection timeout in seconds** determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
 
-- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, you can set this to 0.
+- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, set this to 0.
 
 - **Write timeout in seconds** controls how long the client will wait to successfully send data to the server. The default setting for this is 0, indicating that there is no limit and the client will wait indefinitely for the operation to complete.
 

versioned_docs/version-8.1/components/connectors/protocol/graphql.md

@@ -177,11 +177,11 @@ Variables:
 }
 ```
 
-### Network Communication Timeouts
+### Network communication timeouts
 
-- **Connection timeout in seconds** setting determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
+- **Connection timeout in seconds** determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
 
-- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, you can set this to 0.
+- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, set this to 0.
 
 - **Write timeout in seconds** controls how long the client will wait to successfully send data to the server. The default setting for this is 0, indicating that there is no limit and the client will wait indefinitely for the operation to complete.
 

versioned_docs/version-8.1/components/connectors/protocol/rest.md

@@ -167,11 +167,11 @@ Secrets are currently not supported in the body of a **REST Connector**.
 }
 ```
 
-### Network Communication Timeouts
+### Network communication timeouts
 
-- **Connection timeout in seconds** setting determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
+- **Connection timeout in seconds** determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
 
-- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, you can set this to 0.
+- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, set this to 0.
 
 - **Write timeout in seconds** controls how long the client will wait to successfully send data to the server. The default setting for this is 0, indicating that there is no limit and the client will wait indefinitely for the operation to complete.
 

versioned_docs/version-8.2/components/connectors/protocol/graphql.md

@@ -177,11 +177,11 @@ Variables:
 }
 ```
 
-### Network Communication Timeouts
+### Network communication timeouts
 
-- **Connection timeout in seconds** setting determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
+- **Connection timeout in seconds** determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
 
-- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, you can set this to 0.
+- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, set this to 0.
 
 - **Write timeout in seconds** controls how long the client will wait to successfully send data to the server. The default setting for this is 0, indicating that there is no limit and the client will wait indefinitely for the operation to complete.
 

versioned_docs/version-8.2/components/connectors/protocol/rest.md

@@ -167,11 +167,11 @@ Secrets are currently not supported in the body of a **REST Connector**.
 }
 ```
 
-### Network Communication Timeouts
+### Network communication timeouts
 
-- **Connection timeout in seconds** setting determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
+- **Connection timeout in seconds** determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
 
-- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, you can set this to 0.
+- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, set this to 0.
 
 - **Write timeout in seconds** controls how long the client will wait to successfully send data to the server. The default setting for this is 0, indicating that there is no limit and the client will wait indefinitely for the operation to complete.
 

versioned_docs/version-8.3/components/connectors/protocol/graphql.md

@@ -177,11 +177,11 @@ Variables:
 }
 ```
 
-### Network Communication Timeouts
+### Network communication timeouts
 
-- **Connection timeout in seconds** setting determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
+- **Connection timeout in seconds** determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
 
-- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, you can set this to 0.
+- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, set this to 0.
 
 - **Write timeout in seconds** controls how long the client will wait to successfully send data to the server. The default setting for this is 0, indicating that there is no limit and the client will wait indefinitely for the operation to complete.
 

versioned_docs/version-8.3/components/connectors/protocol/rest.md

@@ -167,11 +167,11 @@ Secrets are currently not supported in the body of a **REST Connector**.
 }
 ```
 
-### Network Communication Timeouts
+### Network communication timeouts
 
-- **Connection timeout in seconds** setting determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
+- **Connection timeout in seconds** determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
 
-- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, you can set this to 0.
+- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, set this to 0.
 
 - **Write timeout in seconds** controls how long the client will wait to successfully send data to the server. The default setting for this is 0, indicating that there is no limit and the client will wait indefinitely for the operation to complete.
 

versioned_docs/version-8.4/components/connectors/protocol/graphql.md

@@ -177,11 +177,11 @@ Variables:
 }
 ```
 
-### Network Communication Timeouts
+### Network communication timeouts
 
-- **Connection timeout in seconds** setting determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
+- **Connection timeout in seconds** determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
 
-- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, you can set this to 0.
+- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, set this to 0.
 
 - **Write timeout in seconds** controls how long the client will wait to successfully send data to the server. The default setting for this is 0, indicating that there is no limit and the client will wait indefinitely for the operation to complete.
 

versioned_docs/version-8.4/components/connectors/protocol/rest.md

@@ -167,11 +167,11 @@ Secrets are currently not supported in the body of a **REST Connector**.
 }
 ```
 
-### Network Communication Timeouts
+### Network communication timeouts
 
-- **Connection timeout in seconds** setting determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
+- **Connection timeout in seconds** determines the time frame in which the client will try to establish a connection with the server. If you do not specify a value, the system uses the default of 20 seconds. For cases where you need to wait indefinitely, set this value to 0.
 
-- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, you can set this to 0.
+- **Read timeout in seconds** is the amount of time the client will wait to read data from the server after the connection has been made. The default is also set to 20 seconds. To allow an unlimited wait time for slow responses, set this to 0.
 
 - **Write timeout in seconds** controls how long the client will wait to successfully send data to the server. The default setting for this is 0, indicating that there is no limit and the client will wait indefinitely for the operation to complete.