Skip to content
Fred G edited this page Mar 18, 2018 · 1 revision

Bootloader

The bootloader allows to update the firmware on the Crazyflie over-the-air.

Please note:

  • Only supported when using Crazyradio.

Updating the firmware:

  • The bootloader can be accessed here: Preferences button → Bootloader
  • Select a firmware version in the drop down menu (the latest firmware is selected by default).
  • You can click on the "i" button to read the release notes.
  • Click on the "Flash firmware" button
  • Put the Crazyflie in bootloader mode
    • Crazyflie 2.0: Switch off the Crazyflie, then long-press the on/off button until only the two blue LEDs start blinking
  • Wait until the flash process is done (should take about 30 seconds) and the Crazyflie starts again in normal mode (beeps and spins the props).