Abstraction for LTC681X family. Supports all devices of LTC681X family: LTC6813, LTC6812, LTC6811 and LTC6810.
Currently, the following features are implemented:
- Cell and GPIO conversion
- Reading cell and GPIO voltage registers
- Multiple devices in daisy chain
- ADC status polling (SDO line method)
- Mapping voltages to GPIO and cell groups
- Abstracted device configuration
- Overlapping ADC measurement
- Internal device parameters measurement
For all details see monitor module.
use ltc681x::example::ExampleSPIDevice;
use ltc681x::ltc6813::{CellSelection, Channel, GPIOSelection, LTC6813};
use ltc681x::monitor::{ADCMode, LTC681X, LTC681XClient, PollClient};
let spi_bus = ExampleSPIDevice::default();
// LTC6813 device
let mut client: LTC681X<_, _, LTC6813, 1> = LTC681X::ltc6813(spi_bus);
// Starts conversion for cell group 1
client.start_conv_cells(ADCMode::Normal, CellSelection::Group1, true);
// Wait until ADC conversion is finished or poll the status
// (s. 'Conversion time' and 'Polling' section(s) of monitor module)
// Returns the value of cell group A. In case of LTC613: cell 1, 7 and 13
let voltages = client.read_voltages(CellSelection::Group1).unwrap();
assert_eq!(Channel::Cell1, voltages[0][0].channel);
assert_eq!(24979, voltages[0][0].voltage);
⚠️ The crate is still incomplete, but is under active development.
⚠️ The crate has only been tested for the LTC6813 variant. Although the protocol of the LTC681X family is essentially the same, inconsistencies are still conceivable for some variants. Practical tests + feedback with other variants are therefore welcome.
Any form of support is greatly appreciated. Feel free to create issues and PRs. See DEVELOPMENT for more details.
Licensed under either of
- Apache License, Version 2.0, (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT) at your option.
Each contributor agrees that his/her contribution covers both licenses.