Merge pull request #51 from aris-space/safety-concept

OSS CF & HF Safety Concept

src/general/firing-conduction/sections/briefing.tex

@@ -27,9 +27,6 @@
   \cellcolor{cyan}
   \procedureItem{Inform about the role assignment (sec. B)}{}
 
-  \cellcolor{cyan}
-  \procedureItem{Show current phase on the Firing Organization Chart}{}
-
   \cellcolor{cyan}
   \procedureItem{Read out behaviour rules:
     \begin{itemize}
@@ -41,6 +38,7 @@
       \item On the airfield: when going to the toilet, let other people know
       \item You are NOT allowed to take any pictures or videos inside the HUT
       \item The test consists of 13 phases: Pre-Preparation (already over), Briefing (right now), Preparation \& Assembly, Transfer to Airfield, Installation and Pre-Firing Checks, Filling \& Ignition Test, Firing, Safe State Establishment, Post-Firing Checks \& Deinstallation, Return to IPZ, Disassembly \& Inspection, and we end with a Debriefing
+      \item Radio communication: Always use call signs ("TC to DACS") and wait for confirmation ("come in") before message.
       \item Read out the test description (sec. A) (goals of the test)
       \item Go through the test parameters (sec. C)
     \end{itemize}

src/general/firing-conduction/sections/debriefing.tex

@@ -11,9 +11,6 @@
   \cellcolor{cyan}
   \procedureItem{Gather everyone in front of the HANGAR and perform an attendance check (sec. B)}{}
 
-  \cellcolor{cyan}
-  \procedureItem{Show current phase on the Firing Organization Chart}{}
-
   \cellcolor{cyan}
   \procedureItem{$\rightarrow$ TC informs about end of the \textbf{Firing}}{}
 

src/general/firing-conduction/sections/disassembly_inspection.tex

@@ -13,9 +13,6 @@
   \cellcolor{cyan}
   \procedureItem{Gather everyone in front of the HANGAR and perform an attendance check (sec. B)}{}
 
-  \cellcolor{cyan}
-  \procedureItem{Show current phase on the Firing Organization Chart}{}
-
   \cellcolor{cyan}
   \procedureItem{$\rightarrow$ TC informs about upcoming \textbf{Reestablishment}}{}
 

src/general/firing-conduction/sections/post_firing_deinstallation.tex

@@ -13,9 +13,6 @@
   \cellcolor{cyan}
   \procedureItem{Gather everyone in front of the HUT and perform an attendance check (sec. B)}{}
 
-  \cellcolor{cyan}
-  \procedureItem{Show current phase on the Firing Organization Chart}{}
-
   \cellcolor{cyan}
   \procedureItem{$\rightarrow$ TC informs about upcoming Deinstallation}{}
 

src/general/firing-conduction/sections/pre_preparation.tex

@@ -108,7 +108,7 @@
   \procedureItem{Charge mobile phone if necessary (ensure a charger cable is available)}{}
 
   \cellcolor{yellow}
-  \procedureItem{Update config file and csv files on Sharepoint under \hl{tbd}}{}
+  \procedureItem{Update config files on github, coordinate correct hash with DACS}{}
 
   \multicolumn{4}{|c|}{\cellcolor{tableColumnColor} \textit{To be performed 30 min before the Briefing}} \\ \hline
 

src/general/firing-conduction/sections/preconditions_pre_firing.tex

@@ -34,9 +34,6 @@
   \cellcolor{cyan}
   \procedureItem{Gather everyone in front of the HUT and perform an attendance check (sec. B)}{}
 
-  \cellcolor{cyan}
-  \procedureItem{Show current phase on the \textit{\underline{Firing Organization Chart}}}{}
-
   \cellcolor{cyan}
   \procedureItem{$\rightarrow$ TC informs about the upcoming:
     \begin{itemize}

src/general/firing-conduction/sections/preparation_assembly.tex

@@ -12,10 +12,7 @@
   \cellcolor{cyan}
   \procedureItem{If not immediately after briefing: 
     Gather everyone in front of the HANGAR and perform an attendance check (sec. B)}{}
-
-  \cellcolor{cyan}
-  \procedureItem{Show current phase on the \textit{Firing Organization Chart}}{}
-
+
   \cellcolor{cyan}
   \procedureItem{$\rightarrow$ TC informs about upcoming \textbf{Subsystem Preparation}}{}
 
@@ -25,8 +22,6 @@
       \item \textit{\underline{Assembly Engine}}
       \item \textit{\underline{Assembly Igniter}}
       \item \textit{\underline{Preparation PSS}}
-      \item \textit{\underline{Preparation Control}}
-      \item \textit{\underline{KiDAQ}}
     \end{itemize}
   }{}
 
@@ -38,15 +33,6 @@
   \cellcolor{orange}
   \procedureItem{Prepare PSS according to \textit{\underline{Preparation PSS}}}{}
 
-  \cellcolor{yellow}
-  \procedureItem{If not already done: Install the Control station according to \textit{\underline{Installation Control}}}{}
-
-  \cellcolor{yellow}
-  \procedureItem{Prepare DACS according to \textit{\underline{Preparation Control}}}{}
-
-  \cellcolor{yellow}
-  \procedureItem{Prepare DACS according to \textit{\underline{KiDAQ}}}{}
-
   \cellcolor{cyan}
   \procedureItem{Collect completed and signed \textit{\underline{Assembly Engine}} from ENG1}{}
 
@@ -56,12 +42,6 @@
   \cellcolor{cyan}
   \procedureItem{Collect completed and signed \textit{\underline{Preparation PSS}} from PSS1}{}
 
-  \cellcolor{cyan}
-  \procedureItem{Collect completed and signed \textit{\underline{KiDAQ}}}{}
-
-  \cellcolor{cyan}
-  \procedureItem{Collect completed and signed \textit{\underline{Preparation Control}} from DACS1}{}
-
   \cellcolor{cyan}
   \procedureItem{$\rightarrow$ End of Subsystem Preparation}{}
 
@@ -207,7 +187,7 @@
   \procedureItem{Get an N$_2$ Bottle (PRG) from the gas storage and place it on the trailer / in the car (only transport with open window)}{Bottle ID: }
 
   \cellcolor{orange}
-  \procedureItem{Check that N$_2$ Bottle (PRG) is sufficiently full ($>$ 100 bar)}{}
+  \procedureItem{Check that N$_2$ Bottle (PRG) is sufficiently full ($>$ 50 bar)}{}
 
   \cellcolor{orange}
   \procedureItem{Fix N$_2$ Bottle (PRG) onto the trailer using the attached belts and “Spanngurte” (for transport). If no space on the trailer, use a car. Secure them properly in the car (Spanngurte). Never transport oxidizing and flammable gases/liquids in the same car (O$_2$ not in the same car as H$_2$ or Ethanol). Only transport with an open window}{}

src/general/firing-conduction/sections/return_ipz.tex

@@ -32,9 +32,6 @@
   \cellcolor{cyan}
   \procedureItem{Gather everyone in front of the HUT and perform an attendance check (sec. B)}{}
 
-  \cellcolor{cyan}
-  \procedureItem{Show the current phase on the Firing Organization Chart}{}
-
   \cellcolor{cyan}
   \procedureItem{$\rightarrow$ TC informs about the upcoming IPZ}{}
 

src/general/firing-conduction/sections/transfer_installation.tex

@@ -12,7 +12,6 @@
   \procedureItem{If not immediately after briefing:
     \begin{itemize}
       \item Gather everyone in front of the HANGAR and perform an attendance check (sec. B)
-      \item Show current phase on the \textit{\underline{Firing Organization Chart}}
       \item TC informs about upcoming \textbf{Transfer to Airfield}
     \end{itemize}
   }{}
@@ -30,10 +29,8 @@
   \procedureItem{Hand out the following procedures:
     \begin{itemize}
       \item \textit{\textbf{Installation Trailer}}
-      \item \textit{\textbf{Installation Control}}
-      \item \textit{\textbf{Installation Hardware Check}}
-      \item \textit{\textbf{Installation Surveillance}}
-      \item \textit{\textbf{KiDAQ}}
+      \item \textit{\textbf{Installation DACS}}
+      \item \textit{\textbf{KiDAQ}} (if necessary)
       \item \textit{\textbf{Installation PSS}}
       \item \textit{\textbf{Installation Igniter}}
     \end{itemize}
@@ -124,9 +121,6 @@
     \end{itemize}
   }{}
 
-  \cellcolor{cyan}
-  \procedureItem{Take Firing Organization Chart and magnets and place it in the General Box}{}
-
   \cellcolor{cyan}
   \procedureItem{$\rightarrow$ Transfer to Airfield}{}