hw/mcu/dialog: Rework CMAC sleep calculations

Sleep time calculation on CMAC assumed incorrectly that wakeup fsm uses lpclk but in fact RC32K is used so we need to take it into account. To make things easier to handle on CMAC side we will calculate wakeup time on M33 side and pass it to CMAC instead of XTAL32M settle time. This way we don't really need to care about how wakeup fsm is configured. It's now expected that M33 will take care of RC32K calibration and will calculate proper wakeup time based on wakeup fsm settings and XTAL32M settle time, and then notify CMAC on any change so we can recalculate our min sleep time.
apache · Aug 9, 2023 · 82e5794 · 82e5794
1 parent c8596c3
commit 82e5794
Show file tree

Hide file tree

Showing 10 changed files with 108 additions and 87 deletions.
diff --git a/hw/drivers/ipc_cmac/include/ipc_cmac/shm.h b/hw/drivers/ipc_cmac/include/ipc_cmac/shm.h
@@ -38,7 +38,7 @@ extern "C" {
 
 #define CMAC_SHM_CB_MAGIC                   0xc3ac
 
-#define CMAC_SHM_CB_PENDING_OP_LP_CLK       0x0001
+#define CMAC_SHM_CB_PENDING_OP_SLEEP_UPDATE 0x0001
 #define CMAC_SHM_CB_PENDING_OP_RF_CAL       0x0002
 
 #define CMAC_SHM_VECT_MAGIC                 0xc3ac0001
@@ -59,7 +59,7 @@ struct cmac_shm_ctrl {
     uint16_t magic;
     uint16_t pending_ops;
     uint16_t lp_clock_freq;
-    uint16_t xtal32m_settle_us;
+    uint16_t wakeup_lpclk_ticks;
 };
 
 struct cmac_shm_mbox {

diff --git a/hw/drivers/ipc_cmac/include/ipc_cmac/shm_hs.h b/hw/drivers/ipc_cmac/include/ipc_cmac/shm_hs.h
@@ -38,6 +38,10 @@ extern volatile struct cmac_shm_debugdata *g_cmac_shm_debugdata;
 
 void cmac_host_init(void);
 void cmac_host_signal2cmac(void);
+
+void cmac_host_req_sleep_update(void);
+void cmac_host_req_sleep_update_param(uint16_t lpclk_freq,
+                                      uint16_t wakeup_lpclk_ticks);
 void cmac_host_rf_calibrate(void);
 
 #ifdef __cplusplus

diff --git a/hw/drivers/ipc_cmac/src/shm_hs.c b/hw/drivers/ipc_cmac/src/shm_hs.c
@@ -36,6 +36,7 @@
 #include <ipc_cmac/rand.h>
 #include "trng/trng.h"
 #include "console/console.h"
+#include "mcu/da1469x_sleep.h"
 
 extern char _binary_cmac_img_bin_start[];
 extern char _binary_cmac_img_bin_end;
@@ -196,20 +197,10 @@ cmac_host_rand_chk_fill(void)
     }
 }
 
-static void
-cmac_host_lpclk_cb(uint32_t freq)
+static bool
+shm_synced(void)
 {
-    /* No need to wakeup CMAC if LP clock frequency did not change */
-    if (g_cmac_shm_ctrl->lp_clock_freq == freq) {
-        return;
-    }
-
-    cmac_shm_lock();
-    g_cmac_shm_ctrl->lp_clock_freq = freq;
-    g_cmac_shm_ctrl->pending_ops |= CMAC_SHM_CB_PENDING_OP_LP_CLK;
-    cmac_shm_unlock();
-
-    cmac_host_signal2cmac();
+    return g_cmac_shm_ctrl && (g_cmac_shm_ctrl->magic == CMAC_SHM_CB_MAGIC);
 }
 
 static void
@@ -234,8 +225,8 @@ shm_configure(void)
     struct cmac_shm_trim *trim;
     uint32_t *trim_data;
 
-    g_cmac_shm_ctrl->xtal32m_settle_us =
-        MYNEWT_VAL(MCU_CLOCK_XTAL32M_SETTLE_TIME_US);
+    g_cmac_shm_ctrl->lp_clock_freq = 0;
+    g_cmac_shm_ctrl->wakeup_lpclk_ticks = 0;
 
     trim = (struct cmac_shm_trim *)g_cmac_shm_trim;
     trim_data = trim->data;
@@ -415,7 +406,7 @@ cmac_start(void)
     /* Release CMAC from reset and sync */
     CRG_TOP->CLK_RADIO_REG &= ~CRG_TOP_CLK_RADIO_REG_CMAC_SYNCH_RESET_Msk;
 
-    while (g_cmac_shm_ctrl->magic != CMAC_SHM_CB_MAGIC) {
+    while (!shm_synced()) {
         /* Wait for CMAC to initialize */
     }
     NVIC_EnableIRQ(CMAC2SYS_IRQn);
@@ -443,7 +434,7 @@ cmac_host_init(void)
 
     cmac_start();
 
-    da1469x_lpclk_register_cmac_cb(cmac_host_lpclk_cb);
+    cmac_host_req_sleep_update();
 
 #if MYNEWT_VAL(CMAC_DEBUG_HOST_PRINT_ENABLE) && MYNEWT_VAL(CMAC_DEBUG_DATA_ENABLE)
     /* Trim values are calculated on RF init, so are valid after synced with CMAC */
@@ -462,9 +453,47 @@ cmac_host_signal2cmac(void)
     da1469x_pdc_set(g_cmac_host_pdc_sys2cmac);
 }
 
+void
+cmac_host_req_sleep_update(void)
+{
+    uint16_t lpclk_freq;
+    uint32_t wakeup_lpclk_ticks;
+
+    lpclk_freq = da1469x_lpclk_freq_get();
+    wakeup_lpclk_ticks = da1469x_sleep_wakeup_ticks_get();
+
+    cmac_host_req_sleep_update_param(lpclk_freq, wakeup_lpclk_ticks);
+}
+
+void
+cmac_host_req_sleep_update_param(uint16_t lpclk_freq,
+                                 uint16_t wakeup_lpclk_ticks)
+{
+    if (!shm_synced()) {
+        return;
+    }
+
+    if ((g_cmac_shm_ctrl->lp_clock_freq == lpclk_freq) &&
+        (g_cmac_shm_ctrl->wakeup_lpclk_ticks == wakeup_lpclk_ticks)) {
+        return;
+    }
+
+    cmac_shm_lock();
+    g_cmac_shm_ctrl->lp_clock_freq = lpclk_freq;
+    g_cmac_shm_ctrl->wakeup_lpclk_ticks = wakeup_lpclk_ticks;
+    g_cmac_shm_ctrl->pending_ops |= CMAC_SHM_CB_PENDING_OP_SLEEP_UPDATE;
+    cmac_shm_unlock();
+
+    cmac_host_signal2cmac();
+}
+
 void
 cmac_host_rf_calibrate(void)
 {
+    if (!shm_synced()) {
+        return;
+    }
+
     cmac_shm_lock();
     g_cmac_shm_ctrl->pending_ops |= CMAC_SHM_CB_PENDING_OP_RF_CAL;
     cmac_shm_unlock();

diff --git a/hw/mcu/dialog/cmac/include/mcu/cmac_timer.h b/hw/mcu/dialog/cmac/include/mcu/cmac_timer.h
@@ -35,7 +35,7 @@ extern struct cmac_timer_ctrl g_cmac_timer_ctrl;
 void cmac_timer_init(void);
 void cmac_timer_slp_enable(uint32_t ticks);
 void cmac_timer_slp_disable(uint32_t exp_ticks);
-bool cmac_timer_slp_update(void);
+void cmac_timer_slp_update(uint16_t lp_clock_freq);
 bool cmac_timer_slp_is_ready(void);
 #if MYNEWT_VAL(MCU_SLP_TIMER_32K_ONLY)
 static inline uint32_t

diff --git a/hw/mcu/dialog/cmac/src/cmac_isr.c b/hw/mcu/dialog/cmac/src/cmac_isr.c
@@ -17,8 +17,10 @@
  * under the License.
  */
 
+#include <syscfg/syscfg.h>
 #include <CMAC.h>
 #include <mcu/cmac_pdc.h>
+#include <mcu/cmac_timer.h>
 #include <ipc_cmac/shm.h>
 #include <ipc_cmac/mbox.h>
 #include <ipc_cmac/rand.h>
@@ -40,8 +42,9 @@ SYS2CMAC_IRQHandler(void)
         cmac_mbox_read();
         cmac_rand_read();
 
-        if (pending_ops & CMAC_SHM_CB_PENDING_OP_LP_CLK) {
-            cmac_sleep_recalculate();
+        if (pending_ops & CMAC_SHM_CB_PENDING_OP_SLEEP_UPDATE) {
+            cmac_timer_slp_update(g_cmac_shm_ctrl.lp_clock_freq);
+            cmac_sleep_wakeup_time_update(g_cmac_shm_ctrl.wakeup_lpclk_ticks);
         }
 
         if (pending_ops & CMAC_SHM_CB_PENDING_OP_RF_CAL) {

diff --git a/hw/mcu/dialog/cmac/src/cmac_priv.h b/hw/mcu/dialog/cmac/src/cmac_priv.h
@@ -30,7 +30,7 @@ extern "C" {
 extern int8_t g_cmac_pdc_cmac2sys;
 
 void cmac_sleep(void);
-void cmac_sleep_recalculate(void);
+void cmac_sleep_wakeup_time_update(uint16_t wakeup_lpclk_ticks);
 
 #ifdef __cplusplus
 }

diff --git a/hw/mcu/dialog/cmac/src/cmac_sleep.c b/hw/mcu/dialog/cmac/src/cmac_sleep.c
@@ -72,9 +72,9 @@ static uint32_t g_retained_regs_val[ ARRAY_SIZE(retained_regs) ];
 static uint32_t g_mcu_wait_for_swd_start;
 
 /* Minimum time required to go to sleep (until switch to SLP) and then wake up */
-static uint32_t g_mcu_wakeup_usecs_min;
+static uint32_t g_mcu_sleep_lp_ticks_min;
 
-static bool
+static inline bool
 cmac_sleep_is_switch_allowed(void)
 {
     return (ble_phy_xcvr_state_get() == 0) &&
@@ -168,44 +168,34 @@ cmac_sleep_wait4xtal(void)
     *(volatile uint32_t *)0x5000001c = 1;
 }
 
-#define T_USEC(_t)          (_t)
-#define T_LPTICK(_t)        ((_t) * cmac_timer_slp_tick_us())
-#define T_LPTICK_U(_t)      (T_LPTICK(_t) * 15 / 10)
+#define T_USEC(_t)          (((_t) + cmac_timer_slp_tick_us() - 1) / \
+                             cmac_timer_slp_tick_us())
+#define T_LPTICK(_t)        (_t)
 
-static void
-cmac_sleep_calculate_wakeup_time(void)
+void
+cmac_sleep_wakeup_time_update(uint16_t wakeup_lpclk_ticks)
 {
-    assert(g_cmac_shm_ctrl.xtal32m_settle_us);
+    if (wakeup_lpclk_ticks == 0) {
+        g_mcu_sleep_lp_ticks_min = 0;
+        return;
+    }
 
-    g_mcu_wakeup_usecs_min =
+    g_mcu_sleep_lp_ticks_min =
         /*
-         * We need ~12us to prepare for sleep before starting switch to SLP.
+         * We need ~15us to prepare for sleep before starting switch to SLP.
          * Switch to SLP is done by switching SLP clock to LPCLK first and then
          * enabling SLP. The former has to be synchronized with negative edge of
          * LPCLK and the latter happens on positive edge of LPCLK so we just
          * assume 2 LPCLK ticks in worst case.
          */
-        T_USEC(12) + T_LPTICK(2) +
+        T_USEC(15) + T_LPTICK(2) +
         /*
-         * On wake up we assume fast wake up mode which has 3 phases that take
-         * up to 2, 2 and 3 LPCLK ticks respectively (need to add some margin
-         * here for worst-worst case). XTAL32M is started at 3rd phase and we
-         * need to wait for it to settle before switch back to LLT. This is done
-         * by disabling SLP and then switching SLP clock to PCLK. Both actions
-         * are synchronized with LPCLK negative edge so take 2 LPCLK ticks in
-         * worst case. Finally, LLP compensation takes around 50us.
+         * After wakeup (this includes XTAL32M settling) we need to switch back
+         * to LLT. This is done by disabling SLP and then switching SLP clock to
+         * PCLK. Both actions are synchronized with LPCLK negative edge so take
+         * 2 LPCLK ticks in worst case. Finally, LLT compensation takes ~50us.
          */
-        T_LPTICK_U(2) + T_LPTICK_U(2) +
-        max(T_LPTICK_U(3), T_USEC(g_cmac_shm_ctrl.xtal32m_settle_us)) +
-        T_LPTICK(2) + T_USEC(50);
-}
-
-void
-cmac_sleep_recalculate(void)
-{
-    if (cmac_timer_slp_update()) {
-        cmac_sleep_calculate_wakeup_time();
-    }
+        T_LPTICK(wakeup_lpclk_ticks) + T_LPTICK(2) + T_USEC(50);
 }
 
 extern bool ble_rf_try_recalibrate(uint32_t idle_time_us);
@@ -228,25 +218,21 @@ cmac_sleep(void)
     cmac_pdc_ack_all();
 
     wakeup_at = cmac_timer_next_at();
+    sleep_usecs = wakeup_at - cmac_timer_read32();
 
-    /*
-     * At this point in time we know exactly when next LLT interrupt should
-     * happen so need to make sure we can be up and running on time.
-     */
+    if (ble_rf_try_recalibrate(sleep_usecs)) {
+        goto skip_sleep;
+    }
 
-    sleep_usecs = wakeup_at - cmac_timer_read32() - g_mcu_wakeup_usecs_min;
-    if ((int32_t)sleep_usecs <= 0) {
+    if (g_mcu_sleep_lp_ticks_min == 0) {
         switch_to_slp = false;
         deep_sleep = false;
         goto do_sleep;
     }
 
-    if (ble_rf_try_recalibrate(sleep_usecs)) {
-        goto skip_sleep;
-    }
-
-    sleep_lp_ticks = cmac_timer_usecs_to_lp_ticks(sleep_usecs);
-    if (sleep_lp_ticks <= 1) {
+    sleep_lp_ticks = cmac_timer_usecs_to_lp_ticks(sleep_usecs) -
+                     g_mcu_sleep_lp_ticks_min;
+    if ((int32_t)sleep_lp_ticks <= 1) {
         switch_to_slp = false;
         deep_sleep = false;
         goto do_sleep;

diff --git a/hw/mcu/dialog/cmac/src/cmac_timer.c b/hw/mcu/dialog/cmac/src/cmac_timer.c
@@ -334,15 +334,11 @@ cmac_timer_slp_disable(uint32_t exp_ticks)
     assert(CMAC->CM_LL_INT_STAT_REG == 0);
 }
 
-bool
-cmac_timer_slp_update(void)
+void
+cmac_timer_slp_update(uint16_t lp_clock_freq)
 {
-    uint32_t lp_clock_freq;
-
-    lp_clock_freq = g_cmac_shm_ctrl.lp_clock_freq;
-
     if (lp_clock_freq == g_cmac_timer_slp.freq) {
-        return false;
+        return;
     }
 
     g_cmac_timer_slp.freq = lp_clock_freq;
@@ -353,8 +349,6 @@ cmac_timer_slp_update(void)
         g_cmac_timer_slp.tick_ns = 1000000000 / g_cmac_timer_slp.freq;
     }
 #endif
-
-    return true;
 }
 
 bool
@@ -363,7 +357,7 @@ cmac_timer_slp_is_ready(void)
 #if MYNEWT_VAL(MCU_SLP_TIMER_32K_ONLY)
     return g_cmac_timer_slp.freq == 32768;
 #else
-    return g_cmac_timer_slp.freq;
+    return g_cmac_timer_slp.freq != 0;
 #endif
 }
 

diff --git a/hw/mcu/dialog/da1469x/include/mcu/da1469x_lpclk.h b/hw/mcu/dialog/da1469x/include/mcu/da1469x_lpclk.h
@@ -26,9 +26,8 @@
 extern "C" {
 #endif
 
-typedef void (da1469x_lpclk_cb)(uint32_t freq);
+uint16_t da1469x_lpclk_freq_get(void);
 
-void da1469x_lpclk_register_cmac_cb(da1469x_lpclk_cb *cb);
 /* Stable lp clock enabled (e.g. switched to XTAL after settling) */
 void da1469x_lpclk_enabled(void);
 /* Frequency of lp clock changed (e.g. after RCX recalibration) */

diff --git a/hw/mcu/dialog/da1469x/src/da1469x_lpclk.c b/hw/mcu/dialog/da1469x/src/da1469x_lpclk.c
@@ -28,11 +28,10 @@
 #include "hal/hal_timer.h"
 #include "os/os_cputime.h"
 #include "da1469x_priv.h"
+#include "ipc_cmac/shm.h"
 
 bool g_mcu_lpclk_available;
 
-static da1469x_lpclk_cb *g_da1469x_lpclk_cmac_cb;
-
 #if MYNEWT_VAL_CHOICE(MCU_LPCLK_SOURCE, XTAL32K)
 static void
 da1469x_lpclk_settle_tmr_cb(void *arg)
@@ -45,22 +44,29 @@ da1469x_lpclk_settle_tmr_cb(void *arg)
 static void
 da1469x_lpclk_notify(void)
 {
-    if (!g_da1469x_lpclk_cmac_cb || !g_mcu_lpclk_available) {
+    if (!g_mcu_lpclk_available) {
         return;
     }
 
-#if MYNEWT_VAL_CHOICE(MCU_LPCLK_SOURCE, XTAL32K)
-    g_da1469x_lpclk_cmac_cb(32768);
-#elif MYNEWT_VAL_CHOICE(MCU_LPCLK_SOURCE, RCX)
-    g_da1469x_lpclk_cmac_cb(da1469x_clock_lp_rcx_freq_get());
+#if MYNEWT_PKG_apache_mynewt_core__hw_drivers_ipc_cmac
+    cmac_host_req_sleep_update();
 #endif
 }
 
-void
-da1469x_lpclk_register_cmac_cb(da1469x_lpclk_cb *cb)
+uint16_t
+da1469x_lpclk_freq_get(void)
 {
-    g_da1469x_lpclk_cmac_cb = cb;
-    da1469x_lpclk_notify();
+    if (!g_mcu_lpclk_available) {
+        return 0;
+    }
+
+#if MYNEWT_VAL_CHOICE(MCU_LPCLK_SOURCE, XTAL32K)
+    return 32768;
+#elif MYNEWT_VAL_CHOICE(MCU_LPCLK_SOURCE, RCX)
+    return da1469x_clock_lp_rcx_freq_get();
+#else
+    return 0;
+#endif
 }
 
 void