fix(PeriphDrivers): Fix bad logic on ME16 UART IDX checking in MXC_UART_SetClockSource. #5518

Workflow file for this run

.github/workflows/Build_Examples.yml at d43e1a6

	###############################################################################
	#
	# Copyright (C) 2022-2023 Maxim Integrated Products, Inc. (now owned by
	# Analog Devices, Inc.),
	# Copyright (C) 2023-2024 Analog Devices, Inc.
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#
	##############################################################################

	name: Build_Examples

	concurrency:
	group: ${{ github.workflow }}-${{ github.ref }}
	cancel-in-progress: true

	# Controls when the workflow will run
	on:
	# Triggers the workflow on push or pull request events but only for the "main" branch
	push:
	branches: [ "main" ]
	pull_request:
	branches: [ "main" ]

	# Allows you to run this workflow manually from the Actions tab
	workflow_dispatch:

	# A workflow run is made up of one or more jobs that can run sequentially or in parallel
	jobs:

	Build_Examples:
	# The type of runner that the job will run on
	runs-on:
	- ubuntu-latest

	env:
	SOURCE_BRANCH: ${{github.ref_name}}
	TARGET_BRANCH: ${{github.event.pull_request.base.ref}}

	steps:
	# Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
	- uses: actions/checkout@v4
	with:
	# Update the submodules below, doing so here will convert ssh to https
	submodules: false
	fetch-depth: 0
	ref: '${{ github.event.pull_request.head.ref }}'
	repository: '${{ github.event.pull_request.head.repo.full_name }}'

	- name: Get changed files
	id: changed-files
	uses: tj-actions/changed-files@v45
	with:
	files: \|
	**.c
	**.h
	**.S
	**.s
	**.a
	**.cpp
	**.mk
	**/Makefile

	- name: List all changed files
	env:
	ALL_CHANGED_FILES: ${{ steps.changed-files.outputs.all_changed_files }}
	run: \|
	echo ${ALL_CHANGED_FILES} > changed_files
	cat changed_files

	- name: Check watch files
	id: check_watch
	run: \|
	echo SOURCE_BRANCH = $SOURCE_BRANCH
	echo TARGET_BRANCH = $TARGET_BRANCH
	# Determine if we need to run the test
	RUN_TEST=0

	# Always run test if a workflow_dispatch
	if [[ $GITHUB_EVENT_NAME == "workflow_dispatch" ]]; then
	RUN_TEST=1
	fi

	if [[ $SOURCE_BRANCH == "main" ]]; then
	echo "Pushed to main, running test"
	RUN_TEST=1
	fi

	# Check for changes made to these files
	WATCH_FILES="\
	Build_Examples.yml \
	.c \
	.cpp \
	.S \
	.s \
	.h \
	.a \
	.mk \
	makefile \
	Makefile"

	if [[ -n $TARGET_BRANCH ]]; then
	# We are in a PR. Need to check changes against the target branch.
	echo "Comparing PR against target branch: $TARGET_BRANCH"
	echo "Adding remote '$GITHUB_SERVER_URL/$GITHUB_REPOSITORY' as 'upstream'"
	git remote add upstream $GITHUB_SERVER_URL/$GITHUB_REPOSITORY
	echo "Fetching $TARGET_BRANCH"
	git fetch upstream $TARGET_BRANCH
	echo "diffing files"
	CHANGE_FILES=$(git diff --ignore-submodules --name-only remotes/upstream/$TARGET_BRANCH)
	fi

	echo "Watching these locations and files"
	echo $WATCH_FILES

	echo "Checking the following changes"
	echo $CHANGE_FILES

	for watch_file in $WATCH_FILES; do
	for change_file in $CHANGE_FILES; do
	if [[ "${change_file,,}" == *"${watch_file,,}" ]]; then
	echo "Match found. Watch type: $watch_file, File: $change_file"
	RUN_TEST=1
	fi
	done
	done

	# End the test early if there wasn't a significant change
	if [[ $RUN_TEST -eq 0 ]]; then
	echo "Skipping Build"
	else
	echo "Running Build"
	fi

	echo "RUN_TEST=$RUN_TEST" >> $GITHUB_OUTPUT

	- name: Install ARM GCC Toolchain (arm-none-eabi-gcc)
	uses: carlosperate/arm-none-eabi-gcc-action@v1
	id: arm-none-eabi-gcc-action
	if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
	with:
	release: '10.3-2021.10' # <-- The compiler release to use

	- name: Install RISCV GCC Toolchain (riscv-none-embed-gcc)
	if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
	run: \|
	# Install RISCV tools
	npm install --global xpm@latest

	TOOL_VER=10.2.0-1.2.1
	xpm install --global @xpack-dev-tools/riscv-none-embed-gcc@$TOOL_VER
	cp -r /home/runner/.local/xPacks/@xpack-dev-tools/riscv-none-embed-gcc /home/runner/riscv-none-embed-gcc

	# Add riscv tools to path
	echo "/home/runner/riscv-none-embed-gcc/$TOOL_VER/.content/bin" >> $GITHUB_PATH

	- name: Install RISCV GCC Toolchain (riscv-none-elf-gcc)
	if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
	run: \|
	# Install RISCV tools (updated)
	npm install --global xpm@latest

	# https://www.npmjs.com/package/@xpack-dev-tools/riscv-none-elf-gcc
	TOOL_VER=12.2.0-3.1
	xpm install --global @xpack-dev-tools/riscv-none-elf-gcc@$TOOL_VER
	cp -r /home/runner/.local/xPacks/@xpack-dev-tools/riscv-none-elf-gcc /home/runner/riscv-none-elf-gcc

	# Add riscv tools to path
	echo "/home/runner/riscv-none-elf-gcc/$TOOL_VER/.content/bin" >> $GITHUB_PATH

	- name: Install ccache
	if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
	run: \|
	# Install ccache
	sudo apt install -y ccache

	# Prepend ccache into the PATH
	echo "/usr/bin" >> $GITHUB_PATH
	echo "/usr/lib/ccache" >> $GITHUB_PATH

	# Setup ccache links
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-addr2line
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-ar
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-as
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-c
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-c++filt
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-cpp
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-elfedit
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-g
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcc
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcc-10.2.1
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcc-ar
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcc-nm
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcc-ranlib
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcov
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcov-dump
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gcov-tool
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gdb-add-index
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gdb-add-index-py
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gdb-py
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-gprof
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-ld
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-ld.bfd
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-lto-dump
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-nm
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-objcopy
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-objdump
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-ranlib
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-readelf
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-size
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-strings
	sudo ln -s ../../bin/ccache /usr/bin/arm-none-eabi-strip
	sudo ln -s ../../bin/ccache /usr/bin/riscv-none-embed-gcc

	- name: Setup Python
	if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
	uses: actions/[email protected]
	with:
	python-version: '3.10'

	- name: Install packages
	if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
	run: pip install -r .github/workflows/scripts/requirements.txt

	# Runs a set of commands using the runners shell
	- name: Build All Examples
	if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
	run: \|
	# This environment variable is required for the SBTs.
	# It must be set to the absolute path inside the Github repo.
	export MAXIM_SBT_DIR=$(pwd)/Tools/SBT

	# Set MAXIM_PATH to limit warnings
	export MAXIM_PATH=$(pwd)

	python .github/workflows/scripts/build.py --change_file changed_files

	Regression_Test_Make_3_81:
	runs-on:
	- ubuntu-latest
	steps:
	- uses: actions/checkout@v3
	with:
	# Update the submodules below, doing so here will convert ssh to https
	submodules: false
	fetch-depth: 0
	ref: '${{ github.event.pull_request.head.ref }}'
	repository: '${{ github.event.pull_request.head.repo.full_name }}'

	- name: Install Make 3.81
	run: \|
	# Build and install Make version 3.81.
	cd $GITHUB_WORKSPACE
	ls -la
	wget https://ftp.gnu.org/gnu/make/make-3.81.tar.gz
	tar -xvf make-3.81.tar.gz
	cd make-3.81

	# Note: This patch is necessary to get make to build on Ubuntu-22.04.
	patch glob/glob.c $GITHUB_WORKSPACE/.github/workflows/patch/glob_patch.patch

	./configure --prefix=$GITHUB_WORKSPACE/make-3.81
	make
	make install

	# Pre-prend 3.81 to path
	echo "$GITHUB_WORKSPACE/make-3.81/bin:$GITHUB_PATH" > $GITHUB_PATH
	make --version

	- name: Check Make Version
	run: \|
	# If this fails, there is a setup issue with the workflow.
	VERSION_CHECK=$(make --version \| grep 3.81)
	if [ ! "$VERSION_CHECK" ];then
	exit 2
	fi

	- name: Check watch files
	id: check_watch
	run: \|
	echo SOURCE_BRANCH = $SOURCE_BRANCH
	echo TARGET_BRANCH = $TARGET_BRANCH
	# Determine if we need to run the test
	RUN_TEST=0

	# Always run test if a workflow_dispatch
	if [[ $GITHUB_EVENT_NAME == "workflow_dispatch" ]]; then
	RUN_TEST=1
	fi

	if [[ $SOURCE_BRANCH == "main" ]]; then
	echo "Pushed to main, running test"
	RUN_TEST=1
	fi

	# Check for changes made to these files
	WATCH_FILES="\
	Build_Examples.yml \
	.c \
	.cpp \
	.S \
	.s \
	.h \
	.a \
	.mk \
	makefile \
	Makefile"

	if [[ -n $TARGET_BRANCH ]]; then
	# We are in a PR. Need to check changes against the target branch.
	echo "Comparing PR against target branch: $TARGET_BRANCH"
	echo "Adding remote '$GITHUB_SERVER_URL/$GITHUB_REPOSITORY' as 'upstream'"
	git remote add upstream $GITHUB_SERVER_URL/$GITHUB_REPOSITORY
	echo "Fetching $TARGET_BRANCH"
	git fetch upstream $TARGET_BRANCH
	echo "diffing files"
	CHANGE_FILES=$(git diff --ignore-submodules --name-only remotes/upstream/$TARGET_BRANCH)
	fi

	echo "Watching these locations and files"
	echo $WATCH_FILES

	echo "Checking the following changes"
	echo $CHANGE_FILES

	for watch_file in $WATCH_FILES; do
	for change_file in $CHANGE_FILES; do
	if [[ "${change_file,,}" == *"${watch_file,,}" ]]; then
	echo "Match found. Watch type: $watch_file, File: $change_file"
	RUN_TEST=1
	fi
	done
	done

	# End the test early if there wasn't a significant change
	if [[ $RUN_TEST -eq 0 ]]; then
	echo "Skipping Build"
	else
	echo "Running Build"
	fi

	echo "RUN_TEST=$RUN_TEST" >> $GITHUB_OUTPUT

	- name: Install ARM GCC Toolchain (arm-none-eabi-gcc)
	uses: carlosperate/arm-none-eabi-gcc-action@v1
	id: arm-none-eabi-gcc-action
	if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
	with:
	release: '10.3-2021.10' # <-- The compiler release to use

	- name: Install RISCV GCC Toolchain (riscv-none-embed-gcc)
	if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
	run: \|
	# Install RISCV tools
	npm install --global xpm@latest

	TOOL_VER=10.2.0-1.2.1
	xpm install --global @xpack-dev-tools/riscv-none-embed-gcc@$TOOL_VER
	cp -r /home/runner/.local/xPacks/@xpack-dev-tools/riscv-none-embed-gcc /home/runner/riscv-none-embed-gcc

	# Add riscv tools to path
	echo "/home/runner/riscv-none-embed-gcc/$TOOL_VER/.content/bin" >> $GITHUB_PATH

	- name: Install RISCV GCC Toolchain (riscv-none-elf-gcc)
	if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
	run: \|
	# Install RISCV tools (updated)
	npm install --global xpm@latest

	# https://www.npmjs.com/package/@xpack-dev-tools/riscv-none-elf-gcc
	TOOL_VER=12.2.0-3.1
	xpm install --global @xpack-dev-tools/riscv-none-elf-gcc@$TOOL_VER
	cp -r /home/runner/.local/xPacks/@xpack-dev-tools/riscv-none-elf-gcc /home/runner/riscv-none-elf-gcc

	# Add riscv tools to path
	echo "/home/runner/riscv-none-elf-gcc/$TOOL_VER/.content/bin" >> $GITHUB_PATH

	- name: Setup Python
	if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
	uses: actions/[email protected]
	with:
	python-version: '3.10'

	- name: Install packages
	if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
	run: pip install -r .github/workflows/scripts/requirements.txt

	- name: Build PeriphDrivers and Hello_World
	if: ${{ steps.check_watch.outputs.RUN_TEST == '1' }}
	run: \|
	# This environment variable is required for the SBTs.
	# It must be set to the absolute path inside the Github repo.
	export MAXIM_SBT_DIR=$(pwd)/Tools/SBT

	# Set MAXIM_PATH to limit warnings
	export MAXIM_PATH=$(pwd)

	python .github/workflows/scripts/build.py --projects Hello_World

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

fix(PeriphDrivers): Fix bad logic on ME16 UART IDX checking in MXC_UART_SetClockSource. #5518

Workflow file

fix(PeriphDrivers): Fix bad logic on ME16 UART IDX checking in MXC_UART_SetClockSource. #5518

Jobs

Run details

Workflow file for this run