fix(Boards): Configure push buttons with alt function hyper ram to use VDDIO #4572
Workflow file for this run
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ############################################################################### | |
| # | |
| # Copyright (C) 2022-2023 Maxim Integrated Products, Inc. (now owned by | |
| # Analog Devices, Inc.), | |
| # Copyright (C) 2023-2024 Analog Devices, Inc. | |
| # | |
| # Licensed under the Apache License, Version 2.0 (the "License"); | |
| # you may not use this file except in compliance with the License. | |
| # You may obtain a copy of the License at | |
| # | |
| # http://www.apache.org/licenses/LICENSE-2.0 | |
| # | |
| # Unless required by applicable law or agreed to in writing, software | |
| # distributed under the License is distributed on an "AS IS" BASIS, | |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| # See the License for the specific language governing permissions and | |
| # limitations under the License. | |
| # | |
| ############################################################################## | |
| name: BLE Examples Test | |
| # Cancels workflows in progress that are in the same PR | |
| concurrency: | |
| group: ${{ github.workflow }}-${{ github.ref }} | |
| cancel-in-progress: true | |
| # Controls when the workflow will run | |
| on: | |
| # Triggers the workflow on push or pull request events but only for the "main" branch | |
| pull_request: | |
| paths-ignore: | |
| # Any files in a docs directory anywhere in the repository. | |
| - "**/docs/**" | |
| - "**/Documentation/**" | |
| # Any README.md file anywhere in the repository. | |
| - "**/README.md" | |
| # Any .pdf file anywhere in the repository. | |
| - "**/*.pdf" | |
| # Any .yml file anywhere in the repository. | |
| # can comment this out when testing changes to THIS yml file | |
| - "**/*.yml" | |
| # Allows you to run this workflow manually from the Actions tab | |
| workflow_dispatch: | |
| env: | |
| LOCK_MAX32655_B2: false | |
| LOCK_MAX32655_B1: false | |
| LOCK_MAX32665_B1: false | |
| RESULTS_DIR: "ble_test_results" | |
| jobs: | |
| BLE_Tests: | |
| # The type of runner that the job will run on | |
| runs-on: [self-hosted] | |
| if: github.event.pull_request.draft == false | |
| steps: | |
| - uses: actions/checkout@v4 | |
| with: | |
| submodules: false | |
| repository: analogdevicesinc/msdk | |
| fetch-depth: 0 | |
| - name: Check MAX32655 | |
| id: MAX32655 | |
| env: | |
| MAX32655_BLE_FILES_CHANGED: false | |
| MAX32655_EXAMPLES_TO_TEST: () | |
| MAX32655_RUN_ALL_TEST: false | |
| MAX32655_DATS_CONNECTED_TEST: false | |
| MAX32655_OTAS_CONNECTED_TEST: false | |
| run: | | |
| # BLE examples to watch | |
| declare -a watched_examples=( | |
| # underscore in filter to ignore the BLE5_ctr examples | |
| Examples/MAX32655/Bluetooth/BLE_* | |
| Examples/MAX32655/Bluetooth/Bootloader | |
| ) | |
| # Other directories to watch | |
| declare -a watched_other=( | |
| #To test changes this workflow push a commit with this uncommented | |
| #.github/workflows/ | |
| .github/workflows/ci-tests/Examples_tests | |
| Libraries/libs.mk | |
| # Bluetooth | |
| Libraries/BlePhy/MAX32655 | |
| Libraries/Cordio | |
| # Board specific | |
| Libraries/Boards/MAX32655 | |
| # Libraries | |
| Libraries/CMSIS/Device/Maxim/MAX32655 | |
| Libraries/PeriphDrivers/libPeriphDriver.mk | |
| Libraries/PeriphDrivers/periphdriver.mk | |
| Libraries/PeriphDrivers/max32655_files.mk | |
| # AES | |
| Libraries/PeriphDrivers/Source/AES/aes_me17.c | |
| Libraries/PeriphDrivers/Source/AES/aes_revb_regs.h | |
| Libraries/PeriphDrivers/Source/AES/aes_revb.c | |
| Libraries/PeriphDrivers/Source/AES/aes_revb.h | |
| Libraries/PeriphDrivers/Source/AES/aeskeys_revb_regs.h | |
| # Flash controller | |
| Libraries/PeriphDrivers/Source/FLC/flc_common.c | |
| Libraries/PeriphDrivers/Source/FLC/flc_common.h | |
| Libraries/PeriphDrivers/Source/FLC/flc_me17.c | |
| Libraries/PeriphDrivers/Source/FLC/flc_reva.c | |
| Libraries/PeriphDrivers/Source/FLC/flc_reva.h | |
| # GPIO | |
| Libraries/PeriphDrivers/Source/GPIO/gpio_common.c | |
| Libraries/PeriphDrivers/Source/GPIO/gpio_common.h | |
| Libraries/PeriphDrivers/Source/GPIO/gpio_me17.c | |
| Libraries/PeriphDrivers/Source/GPIO/gpio_reva.c | |
| Libraries/PeriphDrivers/Source/GPIO/gpio_reva.h | |
| # LowPower | |
| Libraries/PeriphDrivers/Source/LP/lp_me17.c | |
| # Simo | |
| Libraries/PeriphDrivers/Source/SIMO/simo_me17.c | |
| Libraries/PeriphDrivers/Source/SIMO/simo_reva_regs.h | |
| Libraries/PeriphDrivers/Source/SIMO/simo_.c | |
| Libraries/PeriphDrivers/Source/SIMO/simo_.h | |
| # System | |
| Libraries/PeriphDrivers/Source/SYS/mxc_assert.c | |
| Libraries/PeriphDrivers/Source/SYS/mxc_delay.c | |
| Libraries/PeriphDrivers/Source/SYS/mxc_lock.c | |
| Libraries/PeriphDrivers/Source/SYS/mxc_table.c | |
| Libraries/PeriphDrivers/Source/SYS/pins_me17.c | |
| Libraries/PeriphDrivers/Source/SYS/sys_me17.c | |
| # Timer | |
| Libraries/PeriphDrivers/Source/TMR/tmr_common.c | |
| Libraries/PeriphDrivers/Source/TMR/tmr_common.h | |
| Libraries/PeriphDrivers/Source/TMR/tmr_me17.c | |
| Libraries/PeriphDrivers/Source/TMR/tmr_revb_regs.h | |
| Libraries/PeriphDrivers/Source/TMR/tmr_revb.c | |
| Libraries/PeriphDrivers/Source/TMR/tmr_revb.h | |
| # True Random Number Generator | |
| Libraries/PeriphDrivers/Source/TRNG/trng_me17.c | |
| Libraries/PeriphDrivers/Source/TRNG/trng_revb_regs.h | |
| Libraries/PeriphDrivers/Source/TRNG/trng_revb.c | |
| Libraries/PeriphDrivers/Source/TRNG/trng_revb.h | |
| # UART | |
| Libraries/PeriphDrivers/Source/UART/uart_common.c | |
| Libraries/PeriphDrivers/Source/UART/uart_common.h | |
| Libraries/PeriphDrivers/Source/UART/uart_me17.c | |
| Libraries/PeriphDrivers/Source/UART/uart_revb_regs.h | |
| Libraries/PeriphDrivers/Source/UART/uart_revb.c | |
| Libraries/PeriphDrivers/Source/UART/uart_revb.h | |
| # WakeUp Timer | |
| Libraries/PeriphDrivers/Source/WUT/wut_me17.c | |
| Libraries/PeriphDrivers/Source/WUT/wut_reva_regs.h | |
| Libraries/PeriphDrivers/Source/WUT/wut_reva.c | |
| Libraries/PeriphDrivers/Source/WUT/wut_reva_regs.h ) | |
| # Directories to ignore | |
| declare -a ignored=( | |
| Libraries/Cordio/docs | |
| Documentation | |
| ) | |
| # Create an associative array for ignored() | |
| declare -A aignored=() | |
| for ignore in "${ignored[@]}"; do aignored["${ignore%/}"]=1; done | |
| # Copy the working directory list, skipping entries in ignored() | |
| declare -a results_other=() | |
| for watch in "${watched_other[@]}"; do test -v aignored["${watch%/}"] || results_other+=("${watch%/}"); done | |
| # Copy the working directory list, skipping entries in ignored() | |
| declare -a results_examples=() | |
| for watch in "${watched_examples[@]}"; do test -v aignored["${watch%/}"] || results_examples+=("${watch%/}"); done | |
| # Print the resulting array, separated by newlines, in sorted order | |
| printf "\r\n-------- Watched Examples ------------\r\n\r\n" | |
| printf '%s\n' "${results_examples[@]}" | sort | |
| printf "\r\n-----------------------------------\r\n" | |
| # Print the resulting array, separated by newlines, in sorted order | |
| printf "\r\n-------- Watched Other ------------\r\n\r\n" | |
| printf '%s\n' "${results_other[@]}" | sort | |
| printf "\r\n-----------------------------------\r\n" | |
| #Get the diff from main | |
| CHANGE_FILES=$(git diff --ignore-submodules --name-only remotes/origin/main) | |
| # Assume we want to actually run the workflow if no files changed | |
| if [[ "$CHANGE_FILES" != "" ]]; then | |
| # Check if ALL test are required due to 'OTHER' non BLE example directory modified | |
| for watch_file in "${results_other[@]}"; do | |
| if [[ "$CHANGE_FILES" == *"$watch_file"* ]]; then | |
| MAX32655_RUN_ALL_TEST=true | |
| echo "MAX32655_RUN_ALL_TEST=true" >> $GITHUB_ENV | |
| echo "Enabled all tests to run because $watch_file was modified" | |
| fi | |
| done | |
| # Check to see which examples have been modified to only test those | |
| for watch_file in "${results_examples[@]}"; do | |
| if [[ "$CHANGE_FILES" == *"$watch_file"* ]]; then | |
| MAX32655_BLE_FILES_CHANGED=true | |
| echo "MAX32655_BLE_FILES_CHANGED=true" >> $GITHUB_ENV | |
| example_to_test=$(basename "$watch_file") | |
| # Store list of examples that need to be tested | |
| examples_list+=($example_to_test) | |
| echo "Enabled example tests to run because $watch_file was modified" | |
| # If dats/c or OTAC/s were modified we should also test the connected functionality | |
| if [[ $example_to_test == "BLE_dats" ]] || [[ $example_to_test == "BLE_datc" ]]; then | |
| MAX32655_DATS_CONNECTED_TEST=true | |
| echo "MAX32655_DATS_CONNECTED_TEST=true" >> $GITHUB_ENV | |
| echo "Enabled Datsc connected test" | |
| fi | |
| if [[ $example_to_test == "BLE_otas" ]] || [[ $example_to_test == "BLE_otac" ]]; then | |
| MAX32655_OTAS_CONNECTED_TEST=true | |
| echo "MAX32655_OTAS_CONNECTED_TEST=true" >> $GITHUB_ENV | |
| echo "Enabled OTA connected test" | |
| fi | |
| fi | |
| done | |
| # Save examples list to env varaible available across steps | |
| echo "MAX32655_EXAMPLES_TO_TEST=${examples_list[@]}" >> $GITHUB_ENV | |
| else | |
| # Assume we want to actually run the workflow if no files changed | |
| MAX32655_RUN_ALL_TEST=true | |
| echo "MAX32655_RUN_ALL_TEST=true" >> $GITHUB_ENV | |
| echo "Assuming you want all tests to run" | |
| fi | |
| # Lock main board and DUT if any connected test is required otherwise just lock DUT | |
| if [[ $MAX32655_OTAS_CONNECTED_TEST == 'true' ]] || [[ $MAX32655_DATS_CONNECTED_TEST == 'true' ]] || [[ $MAX32655_RUN_ALL_TEST == 'true' ]]; then | |
| echo "LOCK_MAX32655_B1=true" >> $GITHUB_ENV | |
| echo "LOCK_MAX32655_B2=true" >> $GITHUB_ENV | |
| elif [[ $MAX32655_BLE_FILES_CHANGED == 'true' ]]; then | |
| echo "LOCK_MAX32655_B2=true" >> $GITHUB_ENV | |
| else | |
| echo "no tests enabled, NOT locking anything at this step" | |
| fi | |
| - name: Check MAX32665 | |
| if: false | |
| id: MAX32665 | |
| env: | |
| MAX32665_BLE_FILES_CHANGED: false | |
| MAX32665_EXAMPLES_TO_TEST: () | |
| MAX32665_RUN_ALL_TEST: false | |
| MAX32665_DATS_CONNECTED_TEST: false | |
| MAX32665_OTAS_CONNECTED_TEST: false | |
| run: | | |
| # BLE examples to watch | |
| declare -a watched_examples=( | |
| # underscore in filter to ignore the BLE5_ctr examples | |
| Examples/MAX32665/Bluetooth/BLE_* | |
| Examples/MAX32665/Bluetooth/Bootloader | |
| ) | |
| # Other directories to watch | |
| declare -a watched_other=( | |
| #To test changes this workflow push a commit with this uncommented | |
| #.github/workflows/ | |
| .github/workflows/ci-tests/Examples_tests | |
| Libraries/libs.mk | |
| # Bluetooth | |
| Libraries/BlePhy/MAX32665 | |
| Libraries/Cordio | |
| # Board specific | |
| Libraries/Boards/MAX32665 | |
| # Libraries | |
| Libraries/CMSIS/Device/Maxim/MAX32665 | |
| Libraries/PeriphDrivers/libPeriphDriver.mk | |
| Libraries/PeriphDrivers/periphdriver.mk | |
| Libraries/PeriphDrivers/max32665_files.mk | |
| # Flash controller | |
| Libraries/PeriphDrivers/Source/FLC/flc_common.c | |
| Libraries/PeriphDrivers/Source/FLC/flc_common.h | |
| Libraries/PeriphDrivers/Source/FLC/flc_me14.c | |
| Libraries/PeriphDrivers/Source/FLC/flc_reva.c | |
| Libraries/PeriphDrivers/Source/FLC/flc_reva.h | |
| # GPIO | |
| Libraries/PeriphDrivers/Source/GPIO/gpio_common.c | |
| Libraries/PeriphDrivers/Source/GPIO/gpio_common.h | |
| Libraries/PeriphDrivers/Source/GPIO/gpio_me14.c | |
| Libraries/PeriphDrivers/Source/GPIO/gpio_reva.c | |
| Libraries/PeriphDrivers/Source/GPIO/gpio_reva.h | |
| # LowPower | |
| Libraries/PeriphDrivers/Source/LP/lp_me14.c | |
| # Simo | |
| Libraries/PeriphDrivers/Source/SIMO/simo_me14.c | |
| Libraries/PeriphDrivers/Source/SIMO/simo_reva_regs.h | |
| Libraries/PeriphDrivers/Source/SIMO/simo_.c | |
| Libraries/PeriphDrivers/Source/SIMO/simo_.h | |
| # System | |
| Libraries/PeriphDrivers/Source/SYS/mxc_assert.c | |
| Libraries/PeriphDrivers/Source/SYS/mxc_delay.c | |
| Libraries/PeriphDrivers/Source/SYS/mxc_lock.c | |
| Libraries/PeriphDrivers/Source/SYS/mxc_table.c | |
| Libraries/PeriphDrivers/Source/SYS/pins_me14.c | |
| Libraries/PeriphDrivers/Source/SYS/sys_me14.c | |
| # Timer | |
| Libraries/PeriphDrivers/Source/TMR/tmr_common.c | |
| Libraries/PeriphDrivers/Source/TMR/tmr_common.h | |
| Libraries/PeriphDrivers/Source/TMR/tmr_me14.c | |
| Libraries/PeriphDrivers/Source/TMR/tmr_reva_regs.h | |
| Libraries/PeriphDrivers/Source/TMR/tmr_reva.c | |
| Libraries/PeriphDrivers/Source/TMR/tmr_reva.h | |
| # TPU | |
| Libraries/PeriphDrivers/Source/TPU/tpu_me14.c | |
| Libraries/PeriphDrivers/Source/TPU/tpu_reva_regs.h | |
| Libraries/PeriphDrivers/Source/TPU/tpu_reva.c | |
| Libraries/PeriphDrivers/Source/TPU/tpu_reva.h | |
| # True Random Number Generator | |
| Libraries/PeriphDrivers/Source/TRNG/trng_me14.c | |
| Libraries/PeriphDrivers/Source/TRNG/trng_revb_regs.h | |
| Libraries/PeriphDrivers/Source/TRNG/trng_revb.c | |
| Libraries/PeriphDrivers/Source/TRNG/trng_revb.h | |
| # UART | |
| Libraries/PeriphDrivers/Source/UART/uart_common.c | |
| Libraries/PeriphDrivers/Source/UART/uart_common.h | |
| Libraries/PeriphDrivers/Source/UART/uart_me14.c | |
| Libraries/PeriphDrivers/Source/UART/uart_reva_regs.h | |
| Libraries/PeriphDrivers/Source/UART/uart_reva.c | |
| Libraries/PeriphDrivers/Source/UART/uart_reva.h | |
| # WakeUp Timer | |
| Libraries/PeriphDrivers/Source/WUT/wut_me14.c | |
| Libraries/PeriphDrivers/Source/WUT/wut_reva_regs.h | |
| Libraries/PeriphDrivers/Source/WUT/wut_reva.c | |
| Libraries/PeriphDrivers/Source/WUT/wut_reva_regs.h ) | |
| # Directories to ignore | |
| declare -a ignored=( | |
| Libraries/Cordio/docs | |
| Documentation | |
| ) | |
| # Create an associative array for ignored() | |
| declare -A aignored=() | |
| for ignore in "${ignored[@]}"; do aignored["${ignore%/}"]=1; done | |
| # Copy the working directory list, skipping entries in ignored() | |
| declare -a results_other=() | |
| for watch in "${watched_other[@]}"; do test -v aignored["${watch%/}"] || results_other+=("${watch%/}"); done | |
| # Copy the working directory list, skipping entries in ignored() | |
| declare -a results_examples=() | |
| for watch in "${watched_examples[@]}"; do test -v aignored["${watch%/}"] || results_examples+=("${watch%/}"); done | |
| # Print the resulting array, separated by newlines, in sorted order | |
| printf "\r\n-------- Watched Examples ------------\r\n\r\n" | |
| printf '%s\n' "${results_examples[@]}" | sort | |
| printf "\r\n-----------------------------------\r\n" | |
| # Print the resulting array, separated by newlines, in sorted order | |
| printf "\r\n-------- Watched Other ------------\r\n\r\n" | |
| printf '%s\n' "${results_other[@]}" | sort | |
| printf "\r\n-----------------------------------\r\n" | |
| #Get the diff from main | |
| CHANGE_FILES=$(git diff --ignore-submodules --name-only remotes/origin/main) | |
| # Assume we want to actually run the workflow if no files changed | |
| if [[ "$CHANGE_FILES" != "" ]]; then | |
| # Check if ALL test are required due to 'OTHER' non BLE example directory modified | |
| for watch_file in "${results_other[@]}"; do | |
| if [[ "$CHANGE_FILES" == *"$watch_file"* ]]; then | |
| MAX32665_RUN_ALL_TEST=true | |
| echo "MAX32665_RUN_ALL_TEST=true" >> $GITHUB_ENV | |
| echo "Enabled all tests to run because $watch_file was modified" | |
| fi | |
| done | |
| # Check to see which examples have been modified to only test those | |
| for watch_file in "${results_examples[@]}"; do | |
| if [[ "$CHANGE_FILES" == *"$watch_file"* ]]; then | |
| MAX32665_BLE_FILES_CHANGED=true | |
| echo "MAX32665_BLE_FILES_CHANGED=true" >> $GITHUB_ENV | |
| example_to_test=$(basename "$watch_file") | |
| # Store list of examples that need to be tested | |
| examples_list+=($example_to_test) | |
| echo "Enabled example tests to run because $watch_file was modified" | |
| # If dats/c or OTAC/s were modified we should also test the connected functionality | |
| if [[ $example_to_test == "BLE_dats" ]] || [[ $example_to_test == "BLE_datc" ]]; then | |
| MAX32665_DATS_CONNECTED_TEST=true | |
| echo "MAX32665_DATS_CONNECTED_TEST=true" >> $GITHUB_ENV | |
| echo "Enabled Datsc connected test" | |
| fi | |
| if [[ $example_to_test == "BLE_otas" ]] || [[ $example_to_test == "BLE_otac" ]]; then | |
| MAX32665_OTAS_CONNECTED_TEST=true | |
| echo "MAX32665_OTAS_CONNECTED_TEST=true" >> $GITHUB_ENV | |
| echo "Enabled OTA connected test" | |
| fi | |
| fi | |
| done | |
| # Save examples list to env varaible available across steps | |
| echo "MAX32665_EXAMPLES_TO_TEST=${examples_list[@]}" >> $GITHUB_ENV | |
| else | |
| # Assume we want to actually run the workflow if no files changed | |
| MAX32665_RUN_ALL_TEST=true | |
| echo "MAX32665_RUN_ALL_TEST=true" >> $GITHUB_ENV | |
| fi | |
| # Lock main board and DUT if any connected test is required otherwise just lock DUT | |
| if [[ $MAX32665_OTAS_CONNECTED_TEST == 'true' ]] || [[ $MAX32665_DATS_CONNECTED_TEST == 'true' ]] || [[ $MAX32665_RUN_ALL_TEST == 'true' ]]; then | |
| echo "LOCK_MAX32655_B1=true" >> $GITHUB_ENV | |
| echo "LOCK_MAX32665_B1=true" >> $GITHUB_ENV | |
| elif [[ $MAX32665_BLE_FILES_CHANGED == 'true' ]]; then | |
| echo "LOCK_MAX32665_B1=true" >> $GITHUB_ENV | |
| else | |
| echo "no tests enabled, NOT locking anything at this step" | |
| fi | |
| - name: Check MAX32690 | |
| if: false | |
| id: MAX32690 | |
| env: | |
| MAX32690_BLE_FILES_CHANGED: false | |
| MAX32690_EXAMPLES_TO_TEST: () | |
| MAX32690_RUN_ALL_TEST: false | |
| MAX32690_DATS_CONNECTED_TEST: false | |
| MAX32690_OTAS_CONNECTED_TEST: false | |
| run: | | |
| # BLE examples to watch | |
| declare -a watched_examples=( | |
| # underscore in filter to ignore the BLE5_ctr examples | |
| Examples/MAX32690/Bluetooth/BLE_* | |
| Examples/MAX32690/Bluetooth/Bootloader | |
| ) | |
| # Other directories to watch | |
| declare -a watched_other=( | |
| #To test changes this workflow push a commit with this uncommented | |
| #.github/workflows/ | |
| .github/workflows/ci-tests/Examples_tests | |
| Libraries/libs.mk | |
| # Bluetooth | |
| Libraries/BlePhy/MAX32690 | |
| Libraries/Cordio | |
| # Board specific | |
| Libraries/Boards/MAX32690 | |
| # Libraries | |
| Libraries/CMSIS/Device/Maxim/MAX32690 | |
| Libraries/PeriphDrivers/libPeriphDriver.mk | |
| Libraries/PeriphDrivers/periphdriver.mk | |
| Libraries/PeriphDrivers/max32690_files.mk | |
| # AES | |
| Libraries/PeriphDrivers/Source/AES/aes_me18.c | |
| Libraries/PeriphDrivers/Source/AES/aes_revb_regs.h | |
| Libraries/PeriphDrivers/Source/AES/aes_revb.c | |
| Libraries/PeriphDrivers/Source/AES/aes_revb.h | |
| Libraries/PeriphDrivers/Source/AES/aeskeys_revb_regs.h | |
| # Flash controller | |
| Libraries/PeriphDrivers/Source/FLC/flc_common.c | |
| Libraries/PeriphDrivers/Source/FLC/flc_common.h | |
| Libraries/PeriphDrivers/Source/FLC/flc_me18.c | |
| Libraries/PeriphDrivers/Source/FLC/flc_reva.c | |
| Libraries/PeriphDrivers/Source/FLC/flc_reva.h | |
| # GPIO | |
| Libraries/PeriphDrivers/Source/GPIO/gpio_common.c | |
| Libraries/PeriphDrivers/Source/GPIO/gpio_common.h | |
| Libraries/PeriphDrivers/Source/GPIO/gpio_me18.c | |
| Libraries/PeriphDrivers/Source/GPIO/gpio_reva.c | |
| Libraries/PeriphDrivers/Source/GPIO/gpio_reva.h | |
| # LowPower | |
| Libraries/PeriphDrivers/Source/LP/lp_me18.c | |
| # System | |
| Libraries/PeriphDrivers/Source/SYS/mxc_assert.c | |
| Libraries/PeriphDrivers/Source/SYS/mxc_delay.c | |
| Libraries/PeriphDrivers/Source/SYS/mxc_lock.c | |
| Libraries/PeriphDrivers/Source/SYS/mxc_table.c | |
| Libraries/PeriphDrivers/Source/SYS/pins_me18.c | |
| Libraries/PeriphDrivers/Source/SYS/sys_me18.c | |
| # Timer | |
| Libraries/PeriphDrivers/Source/TMR/tmr_common.c | |
| Libraries/PeriphDrivers/Source/TMR/tmr_common.h | |
| Libraries/PeriphDrivers/Source/TMR/tmr_me18.c | |
| Libraries/PeriphDrivers/Source/TMR/tmr_revb_regs.h | |
| Libraries/PeriphDrivers/Source/TMR/tmr_revb.c | |
| Libraries/PeriphDrivers/Source/TMR/tmr_revb.h | |
| # True Random Number Generator | |
| Libraries/PeriphDrivers/Source/CTB/ctb_common.c | |
| Libraries/PeriphDrivers/Source/CTB/ctb_common.h | |
| Libraries/PeriphDrivers/Source/CTB/ctb_me18.c | |
| Libraries/PeriphDrivers/Source/CTB/ctb_reva_regs.h | |
| Libraries/PeriphDrivers/Source/CTB/ctb_reva.c | |
| Libraries/PeriphDrivers/Source/CTB/ctb_reva.h | |
| Libraries/PeriphDrivers/Source/CTB/trng_reva_regs.h | |
| # UART | |
| Libraries/PeriphDrivers/Source/UART/uart_common.c | |
| Libraries/PeriphDrivers/Source/UART/uart_common.h | |
| Libraries/PeriphDrivers/Source/UART/uart_me18.c | |
| Libraries/PeriphDrivers/Source/UART/uart_revb_regs.h | |
| Libraries/PeriphDrivers/Source/UART/uart_revb.c | |
| Libraries/PeriphDrivers/Source/UART/uart_revb.h | |
| # WakeUp Timer | |
| Libraries/PeriphDrivers/Source/WUT/wut_me18.c | |
| Libraries/PeriphDrivers/Source/WUT/wut_reva_regs.h | |
| Libraries/PeriphDrivers/Source/WUT/wut_reva.c | |
| Libraries/PeriphDrivers/Source/WUT/wut_reva_regs.h ) | |
| # Directories to ignore | |
| declare -a ignored=( | |
| Libraries/Cordio/docs | |
| Documentation | |
| ) | |
| # Create an associative array for ignored() | |
| declare -A aignored=() | |
| for ignore in "${ignored[@]}"; do aignored["${ignore%/}"]=1; done | |
| # Copy the working directory list, skipping entries in ignored() | |
| declare -a results_other=() | |
| for watch in "${watched_other[@]}"; do test -v aignored["${watch%/}"] || results_other+=("${watch%/}"); done | |
| # Copy the working directory list, skipping entries in ignored() | |
| declare -a results_examples=() | |
| for watch in "${watched_examples[@]}"; do test -v aignored["${watch%/}"] || results_examples+=("${watch%/}"); done | |
| # Print the resulting array, separated by newlines, in sorted order | |
| printf "\r\n-------- Watched Examples ------------\r\n\r\n" | |
| printf '%s\n' "${results_examples[@]}" | sort | |
| printf "\r\n-----------------------------------\r\n" | |
| # Print the resulting array, separated by newlines, in sorted order | |
| printf "\r\n-------- Watched Other ------------\r\n\r\n" | |
| printf '%s\n' "${results_other[@]}" | sort | |
| printf "\r\n-----------------------------------\r\n" | |
| #Get the diff from main | |
| CHANGE_FILES=$(git diff --ignore-submodules --name-only remotes/origin/main) | |
| # Assume we want to actually run the workflow if no files changed | |
| if [[ "$CHANGE_FILES" != "" ]]; then | |
| # Check if ALL test are required due to 'OTHER' non BLE example directory modified | |
| for watch_file in "${results_other[@]}"; do | |
| if [[ "$CHANGE_FILES" == *"$watch_file"* ]]; then | |
| MAX32690_RUN_ALL_TEST=true | |
| echo "MAX32690_RUN_ALL_TEST=true" >> $GITHUB_ENV | |
| echo "Enabled all tests to run because $watch_file was modified" | |
| fi | |
| done | |
| # Check to see which examples have been modified to only test those | |
| for watch_file in "${results_examples[@]}"; do | |
| if [[ "$CHANGE_FILES" == *"$watch_file"* ]]; then | |
| MAX32690_BLE_FILES_CHANGED=true | |
| echo "MAX32690_BLE_FILES_CHANGED=true" >> $GITHUB_ENV | |
| example_to_test=$(basename "$watch_file") | |
| # Store list of examples that need to be tested | |
| examples_list+=($example_to_test) | |
| echo "Enabled example tests to run because $watch_file was modified" | |
| # If dats/c or OTAC/s were modified we should also test the connected functionality | |
| if [[ $example_to_test == "BLE_dats" ]] || [[ $example_to_test == "BLE_datc" ]]; then | |
| MAX32690_DATS_CONNECTED_TEST=true | |
| echo "MAX32690_DATS_CONNECTED_TEST=true" >> $GITHUB_ENV | |
| echo "Enabled Datsc connected test" | |
| fi | |
| if [[ $example_to_test == "BLE_otas" ]] || [[ $example_to_test == "BLE_otac" ]]; then | |
| MAX32690_OTAS_CONNECTED_TEST=true | |
| echo "MAX32690_OTAS_CONNECTED_TEST=true" >> $GITHUB_ENV | |
| echo "Enabled OTA connected test" | |
| fi | |
| fi | |
| done | |
| # Save examples list to env varaible available across steps | |
| echo "MAX32690_EXAMPLES_TO_TEST=${examples_list[@]}" >> $GITHUB_ENV | |
| else | |
| # Assume we want to actually run the workflow if no files changed | |
| MAX32690_RUN_ALL_TEST=true | |
| echo "MAX32690_RUN_ALL_TEST=true" >> $GITHUB_ENV | |
| fi | |
| # Lock main board and DUT if any connected test is required otherwise just lock DUT | |
| if [[ $MAX32690_OTAS_CONNECTED_TEST == 'true' ]] || [[ $MAX32690_DATS_CONNECTED_TEST == 'true' ]] || [[ $MAX32690_RUN_ALL_TEST == 'true' ]]; then | |
| echo "LOCK_MAX32655_B1=true" >> $GITHUB_ENV | |
| echo "LOCK_MAX32690_B1=true" >> $GITHUB_ENV | |
| elif [[ $MAX32690_BLE_FILES_CHANGED == 'true' ]]; then | |
| echo "LOCK_MAX32690_B1=true" >> $GITHUB_ENV | |
| else | |
| echo "no tests enabled, NOT locking anything at this step" | |
| fi | |
| - name: Lock Boards | |
| uses: Analog-Devices-MSDK/btm-ci-scripts/actions/[email protected] | |
| with: | |
| boards: | | |
| max32655_board1 | |
| max32655_board2 | |
| max32665_board1 | |
| max32690_board_w1 | |
| lock: true | |
| timeout: 3600 # Attempt to lock for an hour | |
| - name: Init Tests | |
| run: | | |
| #set advertising names | |
| # sed -i "s/'S'/'?'/g" Examples/MAX32655/Bluetooth/BLE_dats/dats_main.c | |
| # sed -i "s/'S'/'?'/g" Examples/MAX32655/Bluetooth/BLE_datc/datc_main.c | |
| # sed -i "s/'S'/'!'/g" Examples/MAX32665/Bluetooth/BLE_dats/dats_main.c | |
| # sed -i "s/'S'/'!'/g" Examples/MAX32690/Bluetooth/BLE_datc/datc_main.c | |
| # sed -i "s/'S'/'?'/g" Examples/MAX32655/Bluetooth/BLE_otas/dats_main.c | |
| # sed -i "s/'S'/'?'/g" Examples/MAX32655/Bluetooth/BLE_otac/datc_main.c | |
| # sed -i "s/'S'/'!'/g" Examples/MAX32665/Bluetooth/BLE_otas/dats_main.c | |
| # sed -i "s/'S'/'!'/g" Examples/MAX32690/Bluetooth/BLE_otac/datc_main.c | |
| - name: Erase Boards DATS | |
| if: ${{env.MAX32655_DATS_CONNECTED_TEST == 'true' || env.MAX32665_DATS_CONNECTED_TEST == 'true' || env.MAX32690_DATS_CONNECTED_TEST == 'true'}} | |
| uses: Analog-Devices-MSDK/btm-ci-scripts/actions/[email protected] | |
| with: | |
| board: | | |
| max32655_board1 | |
| max32655_board2 | |
| max32665_board1 | |
| max32690_board_w1 | |
| has_two_flash_banks: | | |
| true | |
| true | |
| true | |
| true | |
| - name: Flash DATS 655 | |
| if: ${{env.MAX32655_DATS_CONNECTED_TEST == 'true'}} | |
| uses: Analog-Devices-MSDK/btm-ci-scripts/actions/[email protected] | |
| with: | |
| board: | | |
| max32655_board1 | |
| max32655_board2 | |
| project: | | |
| BLE_dats | |
| BLE_datc | |
| suppress_output: true | |
| build_flags: | | |
| ADV_NAME=DAT? | |
| ADV_NAME=DAT? | |
| build: true | |
| distclean: true | |
| - name: DATS 655 | |
| if: ${{env.MAX32655_DATS_CONNECTED_TEST == 'true'}} | |
| run: | | |
| DATS_TEST_DIR=$TEST_DIR/dats | |
| DATS_BOARD_655=max32655_board1 | |
| DATC_BOARD_655=max32655_board2 | |
| (cd $DATS_TEST_DIR && ls && python3 datsc_connected.py $DATS_BOARD_655 $DATC_BOARD_655) | |
| - name: Erase Boards OTAS | |
| if: ${{env.MAX32655_DATS_CONNECTED_TEST == 'true' || env.MAX32665_DATS_CONNECTED_TEST == 'true' || env.MAX32690_DATS_CONNECTED_TEST == 'true'}} | |
| uses: Analog-Devices-MSDK/btm-ci-scripts/actions/[email protected] | |
| with: | |
| board: | | |
| max32655_board1 | |
| max32655_board2 | |
| max32665_board1 | |
| max32690_board_w1 | |
| - name: Flash OTAS | |
| if: ${{env.MAX32655_DATS_CONNECTED_TEST == 'true' || env.MAX32665_DATS_CONNECTED_TEST == 'true' || env.MAX32690_DATS_CONNECTED_TEST == 'true'}} | |
| uses: Analog-Devices-MSDK/btm-ci-scripts/actions/[email protected] | |
| with: | |
| board: | | |
| max32655_board1 | |
| max32655_board2 | |
| max32665_board1 | |
| build_flags: | | |
| ADV_NAME=OTA? | |
| ADV_NAME=OTA? | |
| ADV_NAME=OTA! | |
| ADV_NAME=OTA! | |
| project: | | |
| BLE_otas | |
| BLE_otac | |
| BLE_otac | |
| suppress_output: true | |
| build: true | |
| distclean: true | |
| - name: OTAS | |
| if: ${{env.MAX32655_DATS_CONNECTED_TEST == 'true' || env.MAX32665_DATS_CONNECTED_TEST == 'true' || env.MAX32690_DATS_CONNECTED_TEST == 'true'}} | |
| run: | | |
| OTAS_TEST_DIR=$TEST_DIR/otas | |
| OTAS_BOARD_655=max32655_board1 | |
| OTAC_BOARD_655=max32655_board2 | |
| OTAC_BOARD_665=max32665_board1 | |
| OTAC_BOARD_690=max32690_board_w1 | |
| if [[ $MAX32655_OTAS_CONNECTED_TEST == 'true' ]]; then | |
| (cd $OTAS_TEST_DIR && python3 otas_connected.py $OTAS_BOARD_655 $OTAC_BOARD_655) | |
| fi | |
| # disable for now | |
| # (cd $OTAS_TEST_DIR && python3 otas_connected.py $OTAS_BOARD_655 $OTAC_BOARD_665) | |
| # (cd $OTAS_TEST_DIR && python3 otas_connected.py $OTAS_BOARD_690 $OTAC_BOARD_655) | |
| - name: Result Consolidation | |
| if: failure() | |
| run: | | |
| set +e | |
| rm -rf $RESULTS_DIR | |
| mkdir $RESULTS_DIR | |
| mv $TEST_DIR/dats/dats_out $RESULTS_DIR | |
| mv $TEST_DIR/otas/otas_out $RESULTS_DIR | |
| set -e | |
| - name: Unlock Boards | |
| if: always() | |
| uses: Analog-Devices-MSDK/btm-ci-scripts/actions/[email protected] | |
| with: | |
| lock: false | |
| all_owned: true | |
| #---------------------------------------------------------------------------------------------- | |
| # Save test reports | |
| - uses: actions/upload-artifact@v3 | |
| if: failure() | |
| with: | |
| name: failure-report | |
| path: ${{ env.RESULTS_DIR }} | |
| - name: Clean up | |
| if: always() | |
| run: | | |
| git clean -ffdx | |
| git reset --hard | |