Refer to Getting Started with the MAX78000 Evaluation Kit for details on using the SDK.
September 24, 2020
- Added mnist-streaming example.
- Modified cats-dogs_demo to use DMA.
- Added 8-bit and 16-bit accessors to CRC data register.
- Added missing WELR and RLR registers to FLC block.
- Corrected the address for the TRIMSIR block.
September 4, 2020
- Resolved warning in AES initialization code.
September 3, 2020
- Added faceid_evkit example.
- Adeded snake_game_demo example.
- Completed Wakeup Timer (WUT) example.
- Modified TFT libraries to support different screen orientations.
- Improved DMA support in the camera.
- Changed FCR register and field names to match user guide.
- Reordered watchdog timer instances to match the user guide.
- Removed unused ECC files.
- Set the correct base addresses for the low-power comparators.
- Added functions to allow wake up from low-power timers.
- Updated the flash controller code to the latest revision.
- Improved full-duplex communication code for UART.
July 9, 2020
- Moved camera driver files from the example folders to the Libraries\Boards\MAX78000 folder.
- Replaced the CNN/cats_dogs-chw-fifo example with the CNN/cats-dogs_demo example.
July 1, 2020
- Added macros for referencing evaluation kit LEDs by their name on the board.
- Improved support for the TFT display on the evaluation kit.
- Added MXC_UART_ReadCharacterRaw and MXC_UART_WriteCharacterRaw functions. The "Raw" functions are non-blocking and will return an error code if a character cannot be read or written. The "non-raw" functions will block until the character can be processed.
- Improved support for paralled camera interface.
- Added these examples: CameraIF, cats_dogs-chw-fifo, faceid, faceid_demo,
June 16, 2020
- Updated the CNN/kws20_demo example application. The most significant update being the addition of TFT support.
- Updated the wakeup timer (WUT) example to include deep sleep mode.
- Modified the TFT and touchscreen code in the board folder to be more board independent.
- Corrected some misnamed registers in adc_regs.h.
- Replaced all instances of IntEnable and IntDisable with EnableInt and Disable to maintain consistency across all drivers.
- Added support for the low-power GPIO pins (P3.0 and P3.1).
June 7, 2020
- In the Documentation folder of the SDK, added a MAX78000.html file which serves as a single source for all MAX78000 related documents.
- Added a README.md file for each example.
- Added automatic configuration of ADC GPIO pins.
- Fixed minor GPIO peripheral library bugs.
- Added optional configuration of TMR GPIO pins.
May 21, 2020
- Initial Release
- Debug support for the RISC-V core has not been validated.
- There will be more examples coming in a future release.
- The Eclipse projects show errors and warnings indicating there are unresolved references. However, the projects still build and run correctly.
- When uninstalling the SDK using the maintenance tool, an error will occur referring to the fstab file. This error can be ignored - the uninstall will still complete.
| Example | GCC Status | Eclipse Support | Notes |
|---|---|---|---|
| ADC | Complete | Yes | The overflow, low limit, and high limit are not reported properly in the example. |
| AES | Complete | Yes | |
| CNN/cats-dogs_demo | Complete | Yes | |
| CNN/cats-vs-dogs-chw | Complete | Partial | |
| CNN/cifar-10 | Complete | Yes | |
| CNN/cifar-100 | Complete | Yes | |
| CNN/faceid | Complete | Yes | |
| CNN/faceid_demo | Complete | Partial | |
| CNN/faceid_evkit | Complete | Yes | |
| CNN/kws20 | Complete | Yes | |
| CNN/kws20_demo | Complete | Yes | |
| CNN/mnist | Complete | Partial | |
| CNN/mnist-riscv | Complete | Yes | |
| CNN/snake_game_demo | Complete | Yes | |
| CRC | Complete | Yes | |
| DMA | Complete | Yes | |
| ECC | Complete | Yes | |
| Flash | Complete | Yes | |
| GPIO | Complete | Yes | |
| Hello_World | Complete | Yes | |
| I2C | In Progress | In Progress | |
| I2S | Complete | Yes | |
| ICC | Complete | Yes | |
| LP | In Progress | In Progress | |
| Pulse_Train | Complete | Yes | |
| RTC | Complete | Yes | |
| SPI | Complete | Yes | |
| TFT_Demo | Complete | Yes | The Readme.md file needs to be completed. |
| TMR | Complete | Yes | The PWM signal created by this example is not currently working. |
| TRNG | Complete | Yes | |
| UART | Complete | Yes | |
| Watchdog | Complete | Yes | |
| WUT | Complete | Yes |