Bump smoltcp from 0.10.0 to 0.11.0

[dependabot]

Bumps smoltcp from 0.10.0 to 0.11.0.

Release notes

Sourced from smoltcp's releases.

v0.11.0

Additions

• wire/ipsec: add basic IPsec parsing/emitting (#821).
• phy: add support for TUNSETIFF on MIPS, PPC and SPARC (#839).
• socket/tcp: accept FIN on zero window (#845).
• wire/ipv6: add is_unique_local() to IPv6 addresses (#862).
• wire/ipv6: add is_global_unicast() to IPv6 addresses (#864).
• iface/neigh: add fill_with_expiration (#871).

Fixes

• icmpv6: truncate packet to MTU (#807, #808).
• wire/rpl: DAO-ACK DODAG ID was wrongly read (#824).
• socket/tcp: don't panic when calling listen again on the same local endpoint (#841).
• wire/dhcpv4: don't panic when parsing addresses with incorrect amount of bytes (#843).
• iface/ndisc: prevent ndisc when the medium is IP (#865).
• wire/ieee802154: better parsing of security fields. Correctly parse frame type (3 bits instead of 2 bits) (#868).
• wire/ieee802154: better handle address fields for new frame version (#870).
• iface/tcp: don't send TCP RST with unspecified addresses (#867).
• iface: don't handle empty packets (this would panic when reading the IP version) (#866).
• socket/dhcp: Add an upper bound to the renew/rebind timeout in RetryConfig (#835).

Changes

• iface: rewrite IpPacket such that IPv6 packets can contain owned extension headers (#802).
• iface: remove generic T: [u8] in functions. This reduced the server example by 10KB (#810).
• SocketSet: add comment about using static lifetime for SocketSets with owned storage (#813).
• phy/RawSocket: open raw socket with O_NONBLOCK (#817).
• tests/rstest: use rstest for fixture based testing (#823).
• docs/readme: update readme about IEEE802.15.4 and 6LoWPAN (#826).
• wire/ipv6-hbh: IPv6 HBH has owned options instead of references (#827).
• wire/sixlowpan: 6LoWPAN is split into multiple modules (#828).
• sockets: match the behaviour of peek_slice and recv_slice (#834).
• dependencies: update to headpless v0.8 (#853).
• config: make config constants public (#855).
• phy/ieee802154: clarify mtu+=2 for IEEE802.15.4 (#857).
• sockets: recv_slice returns RcvError::Truncated when the length of the slice is smaller than the data received by the socket (#859).
• iface/ipv6: get_source_address uses RFC 6724 for address selection (#864).
• pcap: use IEEE 802.15.4 without FCS for PCAP link types (#874).
• iface: rename IpPacket/Ipv4Packet/Ipv6Packet to Pacet/PacketV4/PacketV4. This is to remove the ambiguity with IpPacket in src/wire/ (#873).
• wire/ndisc: rewrite parse function (3.1KiB -> 1.9KiB) (#878)
• iface: Check IPv6 address after processing HBH (#861)

Changelog

Sourced from smoltcp's changelog.

[0.11.0] - 2023-12-23

Additions

• wire/ipsec: add basic IPsec parsing/emitting (#821).
• phy: add support for TUNSETIFF on MIPS, PPC and SPARC (#839).
• socket/tcp: accept FIN on zero window (#845).
• wire/ipv6: add is_unique_local() to IPv6 addresses (#862).
• wire/ipv6: add is_global_unicast() to IPv6 addresses (#864).
• iface/neigh: add fill_with_expiration (#871).

Fixes

• icmpv6: truncate packet to MTU (#807, #808).
• wire/rpl: DAO-ACK DODAG ID was wrongly read (#824).
• socket/tcp: don't panic when calling listen again on the same local endpoint (#841).
• wire/dhcpv4: don't panic when parsing addresses with incorrect amount of bytes (#843).
• iface/ndisc: prevent ndisc when the medium is IP (#865).
• wire/ieee802154: better parsing of security fields. Correctly parse frame type (3 bits instead of 2 bits) (#868).
• wire/ieee802154: better handle address fields for new frame version (#870).
• iface/tcp: don't send TCP RST with unspecified addresses (#867).
• iface: don't handle empty packets (this would panic when reading the IP version) (#866).
• socket/dhcp: Add an upper bound to the renew/rebind timeout in RetryConfig (#835).

Changes

• iface: rewrite IpPacket such that IPv6 packets can contain owned extension headers (#802).
• iface: remove generic T: [u8] in functions. This reduced the server example by 10KB (#810).
• SocketSet: add comment about using static lifetime for SocketSets with owned storage (#813).
• phy/RawSocket: open raw socket with O_NONBLOCK (#817).
• tests/rstest: use rstest for fixture based testing (#823).
• docs/readme: update readme about IEEE802.15.4 and 6LoWPAN (#826).
• wire/ipv6-hbh: IPv6 HBH has owned options instead of references (#827).
• wire/sixlowpan: 6LoWPAN is split into multiple modules (#828).
• sockets: match the behaviour of peek_slice and recv_slice (#834).
• dependencies: update to headpless v0.8 (#853).
• config: make config constants public (#855).
• phy/ieee802154: clarify mtu+=2 for IEEE802.15.4 (#857).
• sockets: recv_slice returns RcvError::Truncated when the length of the slice is smaller than the data received by the socket (#859).
• iface/ipv6: get_source_address uses RFC 6724 for address selection (#864).
• pcap: use IEEE 802.15.4 without FCS for PCAP link types (#874).
• iface: rename IpPacket/Ipv4Packet/Ipv6Packet to Pacet/PacketV4/PacketV4. This is to remove the ambiguity with IpPacket in src/wire/ (#873).
• wire/ndisc: rewrite parse function (3.1KiB -> 1.9KiB) (#878)
• iface: Check IPv6 address after processing HBH (#861)

Commits

• ce42011 Release v0.11.0
• 4e2f477 Merge pull request #881 from smoltcp-rs/remove-unused-imports
• 20416ab Remove unused imports.
• b0acaab Merge pull request #877 from thvdveld/update-changelog
• f08e687 Merge pull request #861 from thvdveld/check-ipv6-address
• 3d3fea4 Merge pull request #835 from parallelsystems/dhcp-max-renew-timeout
• 53dc5d7 chore: update changelog
• 8b59d57 Merge pull request #878 from thvdveld/modify-ndisc-parsing
• 2d862b2 change(wire/ndisc): try to parse all options
• 1001586 fix(ipv6): allow loopback destination address
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)