darwin: Upgrade the relevant calculations of vm state to vm state 64 #2
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| name: CI | |
| on: [ push, pull_request ] | |
| env: | |
| # Enable format attributes in ncurses headers | |
| # Enable fortified memory/string handling | |
| CPPFLAGS: -DGCC_PRINTF -DGCC_SCANF -D_FORTIFY_SOURCE=2 | |
| jobs: | |
| build-ubuntu-latest-minimal-gcc: | |
| runs-on: ubuntu-latest | |
| steps: | |
| - uses: actions/checkout@v4 | |
| - name: Install Dependencies | |
| run: sudo apt-get install --no-install-recommends libncursesw5-dev | |
| - name: Bootstrap | |
| run: ./autogen.sh | |
| - name: Configure | |
| run: ./configure --enable-werror --enable-affinity --disable-unicode --disable-sensors || (cat config.log; exit 1) | |
| - name: Enable compatibility modes | |
| run: | | |
| sed -i 's/#define HAVE_FSTATAT 1/#undef HAVE_FSTATAT/g' config.h | |
| sed -i 's/#define HAVE_OPENAT 1/#undef HAVE_OPENAT/g' config.h | |
| sed -i 's/#define HAVE_READLINKAT 1/#undef HAVE_READLINKAT/g' config.h | |
| - name: Build | |
| run: make -k | |
| - name: Distcheck | |
| run: make distcheck DISTCHECK_CONFIGURE_FLAGS="--enable-werror --enable-affinity --disable-unicode --disable-sensors" | |
| build-ubuntu-latest-minimal-clang: | |
| runs-on: ubuntu-latest | |
| env: | |
| CC: clang-18 | |
| steps: | |
| - uses: actions/checkout@v4 | |
| - name: install clang repo | |
| run: | | |
| wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key 2>/dev/null | sudo apt-key add - | |
| sudo add-apt-repository 'deb http://apt.llvm.org/jammy/ llvm-toolchain-jammy-18 main' -y | |
| sudo apt-get update -q | |
| - name: Install Dependencies | |
| run: sudo apt-get install --no-install-recommends clang-18 libncursesw5-dev | |
| - name: Bootstrap | |
| run: ./autogen.sh | |
| - name: Configure | |
| run: ./configure --enable-werror --enable-affinity --disable-unicode --disable-sensors || ( cat config.log; exit 1; ) | |
| - name: Build | |
| run: make -k | |
| - name: Distcheck | |
| run: make distcheck DISTCHECK_CONFIGURE_FLAGS="--enable-werror --enable-affinity --disable-unicode --disable-sensors" | |
| build-ubuntu-latest-full-featured-gcc: | |
| runs-on: ubuntu-latest | |
| # Enable LTO, might trigger additional warnings on advanced inlining | |
| env: | |
| CFLAGS: -O3 -g -flto | |
| LDFLAGS: -O3 -g -flto -Wl,--as-needed | |
| steps: | |
| - uses: actions/checkout@v4 | |
| - name: Install Dependencies | |
| run: sudo apt-get install --no-install-recommends libncursesw5-dev libhwloc-dev libnl-3-dev libnl-genl-3-dev libsensors4-dev libcap-dev | |
| - name: Bootstrap | |
| run: ./autogen.sh | |
| - name: Configure | |
| run: ./configure --enable-werror --enable-openvz --enable-vserver --enable-ancient-vserver --enable-unicode --enable-hwloc --enable-delayacct --enable-sensors --enable-capabilities || ( cat config.log; exit 1; ) | |
| - name: Build | |
| run: make -k | |
| - name: Distcheck | |
| run: make distcheck DISTCHECK_CONFIGURE_FLAGS='--enable-werror --enable-openvz --enable-vserver --enable-ancient-vserver --enable-unicode --enable-hwloc --enable-delayacct --enable-sensors --enable-capabilities' | |
| build-ubuntu-latest-full-featured-clang: | |
| runs-on: ubuntu-latest | |
| env: | |
| CC: clang-18 | |
| steps: | |
| - uses: actions/checkout@v4 | |
| - name: install clang repo | |
| run: | | |
| wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key 2>/dev/null | sudo apt-key add - | |
| sudo add-apt-repository 'deb http://apt.llvm.org/jammy/ llvm-toolchain-jammy-18 main' -y | |
| sudo apt-get update -q | |
| - name: Install Dependencies | |
| run: sudo apt-get install --no-install-recommends clang-18 libncursesw5-dev libhwloc-dev libnl-3-dev libnl-genl-3-dev libsensors4-dev libcap-dev | |
| - name: Bootstrap | |
| run: ./autogen.sh | |
| - name: Configure | |
| run: ./configure --enable-werror --enable-openvz --enable-vserver --enable-ancient-vserver --enable-unicode --enable-hwloc --enable-delayacct --enable-sensors --enable-capabilities || ( cat config.log; exit 1; ) | |
| - name: Build | |
| run: make -k | |
| - name: Distcheck | |
| run: make distcheck DISTCHECK_CONFIGURE_FLAGS='--enable-werror --enable-openvz --enable-vserver --enable-ancient-vserver --enable-unicode --enable-hwloc --enable-delayacct --enable-sensors --enable-capabilities' | |
| build-ubuntu-latest-gcc-static: | |
| runs-on: ubuntu-latest | |
| # Enable LTO, might trigger additional warnings on advanced inlining | |
| env: | |
| CFLAGS: -O3 -g -flto | |
| LDFLAGS: -O3 -g -flto | |
| steps: | |
| - uses: actions/checkout@v4 | |
| - name: Install Dependencies | |
| run: sudo apt-get install --no-install-recommends libncursesw5-dev libtinfo-dev libgpm-dev libsensors4-dev libcap-dev | |
| - name: Bootstrap | |
| run: ./autogen.sh | |
| - name: Configure | |
| run: ./configure --enable-static --enable-werror --enable-openvz --enable-vserver --enable-ancient-vserver --enable-unicode --disable-hwloc --disable-delayacct --enable-sensors --enable-capabilities || ( cat config.log; exit 1; ) | |
| - name: Build | |
| run: make -k | |
| - name: Distcheck | |
| run: make distcheck DISTCHECK_CONFIGURE_FLAGS='--enable-static --enable-werror --enable-openvz --enable-vserver --enable-ancient-vserver --enable-unicode --disable-hwloc --disable-delayacct --enable-sensors --enable-capabilities' | |
| build-ubuntu-latest-pcp: | |
| # we want PCP v5.2.3+ | |
| runs-on: ubuntu-22.04 | |
| steps: | |
| - uses: actions/checkout@v4 | |
| - name: Install Dependencies | |
| run: sudo apt-get install --no-install-recommends libpcp3-dev libncursesw5-dev libtinfo-dev libgpm-dev | |
| - name: Bootstrap | |
| run: ./autogen.sh | |
| - name: Configure | |
| run: ./configure --enable-werror --enable-pcp --enable-unicode || ( cat config.log; exit 1; ) | |
| - name: Build | |
| run: make -k | |
| build-ubuntu-latest-clang-analyzer: | |
| runs-on: ubuntu-latest | |
| env: | |
| CC: clang-18 | |
| steps: | |
| - uses: actions/checkout@v4 | |
| - name: install clang repo | |
| run: | | |
| wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key 2>/dev/null | sudo apt-key add - | |
| sudo add-apt-repository 'deb http://apt.llvm.org/jammy/ llvm-toolchain-jammy-18 main' -y | |
| sudo apt-get update -q | |
| - name: Install Dependencies | |
| run: sudo apt-get install --no-install-recommends clang-18 clang-tools-18 libncursesw5-dev libnl-3-dev libnl-genl-3-dev libsensors4-dev libcap-dev | |
| - name: Bootstrap | |
| run: ./autogen.sh | |
| - name: Configure | |
| run: scan-build-18 -analyze-headers --status-bugs ./configure --enable-debug --enable-werror --enable-openvz --enable-vserver --enable-ancient-vserver --enable-unicode --enable-delayacct --enable-sensors --enable-capabilities || ( cat config.log; exit 1; ) | |
| - name: Build | |
| run: scan-build-18 -analyze-headers --status-bugs make -j"$(nproc)" | |
| build-ubuntu-latest-clang-sanitizer: | |
| runs-on: ubuntu-latest | |
| env: | |
| CC: clang-18 | |
| CFLAGS: '-O1 -g -ftrivial-auto-var-init=pattern -fsanitize=address -fsanitize-address-use-after-scope -fsanitize-address-use-after-return=always -fno-omit-frame-pointer -fsanitize=undefined -fsanitize=nullability -fsanitize=implicit-conversion -fsanitize=integer -fsanitize=float-divide-by-zero -fsanitize=local-bounds' | |
| LDFLAGS: '-ftrivial-auto-var-init=pattern -fsanitize=address -fsanitize-address-use-after-scope -fsanitize-address-use-after-return=always -fno-omit-frame-pointer -fsanitize=undefined -fsanitize=nullability -fsanitize=implicit-conversion -fsanitize=integer -fsanitize=float-divide-by-zero -fsanitize=local-bounds' | |
| ASAN_OPTIONS: strict_string_checks=1:detect_stack_use_after_return=1:check_initialization_order=1:strict_init_order=1 | |
| UBSAN_OPTIONS: print_stacktrace=1:print_summary=1:halt_on_error=1 | |
| TERM: xterm-color | |
| HTOPRC: .github/workflows/htoprc | |
| steps: | |
| - uses: actions/checkout@v4 | |
| - name: install clang repo | |
| run: | | |
| wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key 2>/dev/null | sudo apt-key add - | |
| sudo add-apt-repository 'deb http://apt.llvm.org/jammy/ llvm-toolchain-jammy-18 main' -y | |
| sudo apt-get update -q | |
| - name: Install LLVM Toolchain | |
| run: sudo apt-get install --no-install-recommends clang-18 libclang-rt-18-dev llvm-18 | |
| - name: Install Dependencies | |
| run: sudo apt-get install --no-install-recommends libncursesw5-dev libhwloc-dev libnl-3-dev libnl-genl-3-dev libsensors4-dev libcap-dev | |
| - name: Bootstrap | |
| run: ./autogen.sh | |
| - name: Configure | |
| run: ./configure --enable-werror --enable-openvz --enable-vserver --enable-ancient-vserver --enable-unicode --enable-hwloc --enable-delayacct --enable-sensors --enable-capabilities || ( cat config.log; exit 1; ) | |
| - name: Build | |
| run: make -k | |
| - name: Run sanitized htop (1) | |
| run: ./htop -h | |
| - name: Run sanitized htop (2) | |
| run: ./htop -n 5 | |
| - name: Run sanitized htop (3) | |
| run: ./htop -n 5 -t | |
| - name: Run sanitized htop (4) | |
| run: ./htop -d 1 -n 50 | |
| build-macos-latest-clang: | |
| runs-on: macOS-latest | |
| env: | |
| CC: clang | |
| steps: | |
| - uses: actions/checkout@v4 | |
| - name: Install Dependencies | |
| run: brew install automake pkg-config | |
| - name: Bootstrap | |
| run: ./autogen.sh | |
| - name: Configure | |
| run: ./configure --enable-werror || ( cat config.log; exit 1; ) | |
| - name: Build | |
| run: make -k | |
| - name: Distcheck | |
| run: make distcheck DISTCHECK_CONFIGURE_FLAGS="--enable-werror" | |
| build-dragonflybsd-latest-gcc: | |
| runs-on: ubuntu-22.04 | |
| timeout-minutes: 20 | |
| steps: | |
| - uses: actions/checkout@v4 | |
| with: | |
| submodules: recursive | |
| - name: Compile | |
| uses: vmactions/dragonflybsd-vm@v1 | |
| with: | |
| release: '6.4.0' | |
| usesh: true | |
| prepare: | | |
| pkg install -y gmake autoconf-2.71 automake ncurses git | |
| git config --global --add safe.directory /home/runner/work/htop/htop | |
| run: | | |
| set -e | |
| export LDFLAGS="-L/usr/local/lib" | |
| export CFLAGS="-I/usr/local/include" | |
| ./autogen.sh | |
| ./configure --enable-unicode --enable-werror | |
| gmake -k | |
| build-freebsd-latest-clang: | |
| runs-on: ubuntu-22.04 | |
| timeout-minutes: 20 | |
| steps: | |
| - uses: actions/checkout@v4 | |
| with: | |
| submodules: recursive | |
| - name: Compile | |
| uses: vmactions/freebsd-vm@v1 | |
| with: | |
| release: '14.0' | |
| usesh: true | |
| prepare: | | |
| pkg install -y gmake autoconf-2.71 automake git | |
| git config --global --add safe.directory /home/runner/work/htop/htop | |
| run: | | |
| set -e | |
| ./autogen.sh | |
| ./configure --enable-unicode --enable-werror | |
| gmake -k | |
| build-netbsd-latest-gcc: | |
| runs-on: ubuntu-22.04 | |
| timeout-minutes: 20 | |
| steps: | |
| - uses: actions/checkout@v4 | |
| with: | |
| submodules: recursive | |
| - name: Compile | |
| uses: vmactions/netbsd-vm@v1 | |
| with: | |
| release: '9.3' | |
| usesh: true | |
| prepare: | | |
| PATH="/usr/pkg/sbin:/usr/pkg/bin:$PATH" | |
| PKG_PATH="https://ftp.netbsd.org/pub/pkgsrc/packages/NetBSD/amd64/9.3/All/" | |
| export PATH PKG_PATH | |
| /usr/sbin/pkg_add pkgin | |
| pkgin -y install autoconf automake libtool ncurses ncursesw gmake git | |
| git config --global --add safe.directory /home/runner/work/htop/htop | |
| run: | | |
| set -e | |
| ./autogen.sh | |
| CPPFLAGS="-I/usr/pkg/include" ./configure --enable-unicode --enable-werror | |
| gmake -k | |
| build-openbsd-latest-clang: | |
| runs-on: ubuntu-22.04 | |
| timeout-minutes: 20 | |
| steps: | |
| - uses: actions/checkout@v4 | |
| with: | |
| submodules: recursive | |
| - name: Compile | |
| uses: vmactions/openbsd-vm@v1 | |
| with: | |
| release: '7.4' | |
| usesh: true | |
| prepare: | | |
| pkg_add gmake autoconf-2.71 automake-1.16.5 git | |
| git config --global --add safe.directory /home/runner/work/htop/htop | |
| run: | | |
| set -e | |
| export AUTOCONF_VERSION=2.71 | |
| export AUTOMAKE_VERSION=1.16 | |
| ./autogen.sh | |
| ./configure --enable-unicode --enable-werror | |
| gmake -k | |
| build-solaris-latest-gcc: | |
| runs-on: ubuntu-22.04 | |
| timeout-minutes: 20 | |
| steps: | |
| - uses: actions/checkout@v4 | |
| with: | |
| submodules: recursive | |
| - name: Compile | |
| uses: vmactions/solaris-vm@v1 | |
| with: | |
| release: '11.4' | |
| usesh: true | |
| prepare: | | |
| pkg install gnu-make autoconf automake ncurses git gcc | |
| git config --global --add safe.directory /home/runner/work/htop/htop | |
| run: | | |
| set -e | |
| ./autogen.sh | |
| ./configure --enable-unicode --enable-werror | |
| gmake -k | |
| whitespace_check: | |
| runs-on: ubuntu-latest | |
| steps: | |
| - uses: actions/checkout@v4 | |
| - name: check-whitespaces | |
| run: git diff-tree --check $(git hash-object -t tree /dev/null) HEAD |