WIP: Huawei ap5030dn #1
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…o firmware partition
…s 'bad magic number' error after flashing
…of Huawei-custom 'BootEnv'
…ch has to be set for sysupgrade
…ill seems to do some PHY initialization magic when auto-boot is interrupted
…ware' partition to BootupA/B as boot address. doesn't seem to work, so use dd
blocktrron
reviewed
Mar 29, 2024
target/linux/generic/backport-6.1/738-net-phy-bcm54612e-add-suspend-resume.patch
Outdated
Show resolved
Hide resolved
| nvmem-cells = <&macaddr_art_2005b 0>; | ||
| nvmem-cell-names = "mac-address"; | ||
|
|
||
| pll-data = <0xa6000000 0x80000101 0x80001313>; |
There was a problem hiding this comment.
Where are these from? Incorrect timings can lead to issues on longer cable runs, so this either needs to be verified by hardware or via statistics (Floodping at all link-speeds is good enough)
... but now saying "a legacy watchdog module is probably present" instead of "ath79-wdt 18060008.wdt: unable to register misc device, err=-16"
…s loader-okli, just always with a block size of 1
blocktrron
reviewed
Mar 30, 2024
CodingMarco
pushed a commit
that referenced
this pull request
Apr 1, 2024
Don't add KERNEL_TESTING_PATCHVER yet as there are some issues with it. On TP-Link Archer C2300 serial console seems to stop working after preinit: > Press the [f] key and hit [enter] to enter failsafe mode > Press the [1], [2], [3] or [4] key and hit [enter] to select the de� On Netgear R8000P XHCI causes external abort: [ 2.139586] Internal error: synchronous external abort: 0000000096000210 [#1] SMP [ 2.147212] Modules linked in: xhci_plat_hcd(+) xhci_hcd ohci_platform ohci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug(O) usbcore nls_base usb_common crc32c_generic [ 2.164774] CPU: 0 PID: 358 Comm: kmodloader Tainted: G O 6.6.22 #0 [ 2.172658] Hardware name: Netgear R8000P (DT) [ 2.177229] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.184395] pc : xhci_gen_setup+0x80/0x34c [xhci_hcd] [ 2.189591] lr : xhci_gen_setup+0x74/0x34c [xhci_hcd] [ 2.194788] sp : ffffffc0815d37b0 [ 2.198194] x29: ffffffc0815d37b0 x28: ffffff8002000000 x27: ffffff8001172d88 [ 2.205540] x26: ffffff8002000000 x25: 0000000000000000 x24: ffffffc078b603c0 [ 2.212888] x23: ffffffc078b2a008 x22: ffffff8001172c10 x21: ffffff8002000000 [ 2.220235] x20: ffffff8002000000 x19: ffffff8002000250 x18: 0000000000000000 [ 2.227582] x17: 626d756e20737562 x16: 2064656e67697373 x15: ffffffffffffffff [ 2.234929] x14: ffffff80019e9915 x13: ffffff80019e9913 x12: 00000000ffffffea [ 2.242276] x11: 00000000ffffefff x10: 0000000000000062 x9 : 00000000ffffffd0 [ 2.246760] bcm63138_nand ff801800.nand-controller: timeout waiting for command 0x4 [ 2.249623] x8 : 0000000000000073 x7 : ffffffc0815d37c0 x6 : 0000000000000075 [ 2.257513] bcm63138_nand ff801800.nand-controller: intfc status c00000e0 [ 2.264855] x5 : 0000000000000081 x4 : 0000000000000000 x3 : ffffff8001b61800 [ 2.279193] x2 : ffffffc080b5d000 x1 : ffffff80020003a8 x0 : ffffff8002000398 [ 2.286540] Call trace: [ 2.289048] xhci_gen_setup+0x80/0x34c [xhci_hcd] Signed-off-by: Rafał Miłecki <[email protected]>
CodingMarco
pushed a commit
that referenced
this pull request
Jul 13, 2024
If this function is marked as __init, kernel will splat when driver is (re)bind echo "c080000.ethernet">/sys/bus/platform/drivers/ipqess-edma/unbind echo "c080000.ethernet">/sys/bus/platform/drivers/ipqess-edma/bind Example with additional print messages, functions at boot: [ 2.039468] ipqess-edma c080000.ethernet: ipqess_axi_probe pre register_netdev [ 2.039530] ipqess-edma c080000.ethernet: *netdev: c27d2000 [ 2.045609] ipqess-edma c080000.ethernet: &ipqess_init: c0d1e28c [ 2.051122] ipqess_init [ 2.057338] netdev: c27d2000 [ 2.059492] ess = netdev_priv: c27d2500 [ 2.062615] ess->pdev: c2138c00 [ 2.066174] ess->pdev->dev: c2138c10 [ 2.069314] ess->pdev->dev.of_node: ef6f6368 [ 2.073120] ess->pdev->dev.of_node: /soc/ethernet@c080000 fails (bind) after unbind: [ 34.987948] ipqess-edma c080000.ethernet: ipqess_axi_probe pre register_netdev [ 34.988012] ipqess-edma c080000.ethernet: *netdev: c27d6000 [ 34.994088] ipqess-edma c080000.ethernet: &ipqess_init: c0d1e28c [ 34.999652] 8<--- cut here --- [ 35.005802] Unable to handle kernel paging request at virtual address c0d1e28c when execute [ 35.008676] [c0d1e28c] *pgd=80c1941e(bad) [ 35.016918] Internal error: Oops: 8000000d [#1] SMP ARM Signed-off-by: John Thomson <[email protected]> Link: openwrt#15831 Signed-off-by: Robert Marko <[email protected]>
CodingMarco
pushed a commit
that referenced
this pull request
Sep 15, 2024
Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 16MB NOR RAM: 256MB Ethernet: 2x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset Power: DC 12V 1A, PoE 802.3af 48V Flash instructions: Option #1 - SSH I was able to SSH into the stock firmware of my device. 1. Attach the router to the network 2. Use scp (-O) to copy the sysupgrade image 3. Connect using SSH and run `sysupgrade -n` Option #2 - U-Boot One way to use the bootloader for flashing is using TFTP: 1. Connect to the router using an ethernet cable 2 Spin up a TFTP server serving the sysupgrade file 3. Open the case and attach a UART 4. Attach power to the router and interrupt the countdown by pressing any key 5. Select option #2 (Upgrade firmware) 6. Enter IP address information and image name 7. Wait patiently Co-Authored-By: Enrique Rodríguez Valencia <[email protected]> Co-Authored-By: Hauke Mehrtens <[email protected]> Signed-off-by: Leon M. Busch-George <[email protected]> (cherry picked from commit b4086f4)
CodingMarco
pushed a commit
that referenced
this pull request
Dec 17, 2024
Currently, when removing ath11k or any other driver that uses dummy netdev kernel will crash with: [ 365.004961] ------------[ cut here ]------------ [ 365.004992] kernel BUG at net/core/dev.c:10979! [ 365.008642] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 365.012898] Modules linked in: pppoe ppp_async nft_fib_inet nf_flow_table_inet ath11k_ahb(O) ath11k(O) pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_c [ 365.064794] CPU: 3 PID: 3896 Comm: procd Tainted: G O 6.6.52 #0 [ 365.087031] Hardware name: QNAP 301w (DT) [ 365.094058] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 365.098229] pc : free_netdev+0x164/0x1a0 [ 365.104994] lr : free_netdev+0xec/0x1a0 [ 365.109159] sp : ffffffc081d33b90 [ 365.112718] x29: ffffffc081d33b90 x28: ffffff80039d3c00 x27: ffffff800307f000 [ 365.116199] x26: ffffff800538a000 x25: ffffff8005388000 x24: ffffff800538a4c0 [ 365.123317] x23: 00000000000023a4 x22: ffffff8005388f68 x21: ffffff8004e37050 [ 365.130434] x20: ffffff8004e37000 x19: ffffff8004e36ee8 x18: 0000000000000152 [ 365.137552] x17: 63775f357636712e x16: 3030303030646320 x15: ffffffc081436e20 [ 365.144670] x14: ffffff80033f261c x13: 00000000000000d9 x12: 0000000000000002 [ 365.151789] x11: 0000000000000000 x10: 00000000000008a0 x9 : ffffffc081d33980 [ 365.158906] x8 : ffffff80039d4500 x7 : ffffff803fdda6c0 x6 : 0000000000000007 [ 365.166025] x5 : 0000000000000000 x4 : 00000000000000c1 x3 : 00000000000001f4 [ 365.173143] x2 : ffffff803fdd4b78 x1 : ffffff8004e37050 x0 : 0000000000000005 [ 365.180261] Call trace: [ 365.187370] free_netdev+0x164/0x1a0 [ 365.189630] 0xffffffc079b373f0 [ 365.193447] 0xffffffc079b374c0 [ 365.196311] platform_shutdown+0x24/0x34 [ 365.199438] device_shutdown+0x160/0x268 [ 365.203605] kernel_restart+0x40/0xc0 [ 365.207510] __do_sys_reboot+0x104/0x220 [ 365.211070] __arm64_sys_reboot+0x24/0x30 [ 365.215063] invoke_syscall.constprop.0+0x5c/0x108 [ 365.218971] do_el0_svc+0x40/0xc8 [ 365.223655] el0_svc+0x30/0xb8 [ 365.227041] el0t_64_sync_handler+0x120/0x12c [ 365.229995] el0t_64_sync+0x178/0x17c [ 365.234424] Code: f94013f5 a8c37bfd d50323bf d65f03c0 (d4210000) [ 365.238072] ---[ end trace 0000000000000000 ]--- Wireless backports include alloc_netdev_dummy() backport but they dont have the required free_netdev change first, so backport it. Fixes: openwrt#16531 Fixes: 384d079 ("mac80211: update to version 6.11") Link: openwrt#16549 Signed-off-by: Robert Marko <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Thanks for your contribution to OpenWrt!
To help keep the codebase consistent and readable,
and to help people review your contribution,
we ask you to follow the rules you find in the wiki at this link
https://openwrt.org/submitting-patches
Please remove this message before posting the pull request.