Skip to content

This library can be used for human thermal detection. There are examples to read temperature readings as quickly as possible and read the temperature pixels, output the temperature readings to all pixels to be read by a Processing visualizer from the MLX90640 IR array.

License

Notifications You must be signed in to change notification settings

Seeed-Studio/Seeed_Arduino_MLX9064x

Repository files navigation

Seeed Arduino MLX90640 Build Status

The inspiration for this product came from Melexis's mlx90640 and Melexis's mlx90641. This relies on the driver written by Melexis.

Introduction

Grove - Thermal Imaging Camera is a thermal sensor which carries MLX90640 IR Array. The camera can present dynamic thermal images and detect the surrounding temperature from -40℃~300℃. The camera with narrow-angle/wide-angle has an FOV(Field of View) of 55°x35°/110°x75°.

The IR thermal camera carries a 32x24 array of thermal sensors (MLX90640), it can detect the temperature of objects from feet away with the accuracy of ±1.5℃. In order to obtain the thermal image easily, I2C protocol is used to get the low-resolution image from the camera.

This module connects the MCU with the I2C interface. However, it needs an MCU which has over 20000 bytes of RAM to drive the camera. As a matter of fact, Dev board like Arduino Uno can not be used with this Sensor camera due to its lower ability of calculation. We recommend you to choose Arch Mix as an MCU to control the camera because it really has a good performance to process the complex data from the IR sensor camera.

Note:

  • Visualization The visual effect is as follows, you can use the following command to install his upper computer on the raspberry PI or PC
pip3 install seeed_python_ircamera

#PortName is like COM1,COM2 in Windows system.
#MLX90640 is an optional chip type , MLX90640 or MLX90641 can be supported for now.
ircamera PortName MLX90640


This software is written by Baozhu [email protected] for seeed studio and is licensed under The MIT License. Check License.txt for more information.

Contributing to this software is warmly welcomed. You can do this basically by forking, committing modifications and then pulling requests (follow the links above for operating guide). Adding change log and your contact into file header is encouraged. Thanks for your contribution.

Seeed Studio is an open hardware facilitation company based in Shenzhen, China. Benefiting from local manufacture power and convenient global logistic system, we integrate resources to serve new era of innovation. Seeed also works with global distributors and partners to push open hardware movement.

About

This library can be used for human thermal detection. There are examples to read temperature readings as quickly as possible and read the temperature pixels, output the temperature readings to all pixels to be read by a Processing visualizer from the MLX90640 IR array.

Topics

Resources

License

Code of conduct

Stars

Watchers

Forks

Packages

No packages published