Introduction

This project describes how to install and deploy a local all-in-one PSAR based in OpenStack IceHouse Version and OpenMANO. Recent releases of OpenStack could be compatible but have not been tested.

What kind of backend to use is configurable during the installation. It is not recommended to switch the backend (OpenStack/OpenMANO) once you have started to store information. If it is needed then you must migrate the information manually.

Next Figure shows the internals of PSAR.

Openstack Backend

It is compound of:

Keystone module will be used to offer a Authentication and authorization module for the infrastructure on PSAR, but also can be offered for other elements.

Glance module will offer a repository for Virtual Machines images and also plugins code

Swift module allows to store PSA manifest XML file.

All Open Stack modules are invoked via Manager module using different Open Stack API. This modularity allows switching to others models of storage.

One of the great advantages of use Open Stack is that allows integration and visualization of PSAs through external systems. The simplest case is accessing via a Horizon module.

OpenMANO Backend

It is compound of:

Keystone module will be used to offer a Authentication and authorization module for the infrastructure on PSAR, but also can be offered for other elements.

Local Storage allows to store in local files some information, like manifest or plugin.

OpenMANO is an open source project that provides a practical implementation of the reference architecture for Management & Orchestration under standardization at ETSI’s NFV ISG (NFV MANO). It consists of three main SW components:

openvim: reference implementation of an NFV VIM (Virtualised Infrastructure Manager). It interfaces with the compute nodes in the NFV Infrastructure and an openflow controller in order to provide computing and networking capabilities and to deploy virtual machines.
openmano: reference implementation of an NFV-O (Network Functions Virtualisation Orchestrator).
openmano-gui: web GUI to interact with openmano server, through its northbound API, in a friendly way.

This tutorial was tested using a server running Ubuntu 14.04 LTS

Repository content:

The list folders includes:

PSA - Manager module of PSAR.
client - Developed to be used by other components to interact with PSAR API. Includes a python module to be used and some CLI clients in python.
images - Auxiliary images for documentation
psar - Django framework. Auxiliary files
tests - Unitary testing scripts
v1status - Django framework. Auxiliary files

Installing and configuring openstack:

Default version for Openstack on the Ubuntu 14.04 repositories is Icehouse. Availability of the packages is guaranteed until 14.04 EOL, but no updates are available from Openstack. Details in https://wiki.ubuntu.com/ServerTeam/CloudArchive

Newer versions than Icehouse are not tested, and may require additional configuration

Keystone:

Start with keystone, as the other two make use of its authentication services

Installation:

Install keystone and mysql (do not forget to define root password) from the Ubuntu Repositories
```
sudo apt-get install keystone mysql-server python-mysqldb		
```

Edit /etc/keystone/keystone.conf and change the [database] section. Replace KEYSTONE_DBPASS with a suitable password for the database user:

	[database]
	# The SQLAlchemy connection string used to connect to the database
	connection = mysql://keystone:[email protected]/keystone

```
  Restart Keystone to apply the changes:

                  sudo service keystone restart
```
If previous command fails to start keystone, alternatives (sudo service keystone stop; sudo keystone-all &)

Create a keystone database user:

	$ mysql -u root -p
		mysql> CREATE DATABASE keystone;
		mysql> GRANT ALL PRIVILEGES ON keystone.* TO 'keystone'@'localhost' \
			IDENTIFIED BY 'KEYSTONE_DBPASS';
		mysql> GRANT ALL PRIVILEGES ON keystone.* TO 'keystone'@'%' \
				IDENTIFIED BY 'KEYSTONE_DBPASS';
		mysql> exit

And the tables:
```
	sudo keystone-manage db_sync
```
Edit /etc/keystone/keystone.conf and change the [DEFAULT] section, replacing ADMIN_TOKEN with a random token (e.g. generate with "openssl rand -hex 10"):
```
	[DEFAULT]
	# A "shared secret" between keystone and other openstack services
	admin_token = ADMIN_TOKEN	
```
Configure the log directory. Edit the /etc/keystone/keystone.conf file and update the [DEFAULT] section:
```
	[DEFAULT]
	...
	log_dir = /var/log/keystone
```

Run the following command:

	sudo keystone-manage pki_setup --keystone-group=keystone --keystone-user=keystone

Restart Keystone service:
```
	sudo service keystone restart
```

Creating tenants, users and services:

Until we create an admin profile, we need to bypass the authentication system. To do that:

	export OS_SERVICE_TOKEN=ADMIN_TOKEN
	export OS_SERVICE_ENDPOINT=http://YOUR_IP:35357/v2.0

First, we create the admin user:

	keystone user-create --name=admin --pass=ADMIN_PASS

Then, the tenant:

	keystone tenant-create --name=admin --description="Admin Tenant"

And the role:
```
	keystone role-create --name=admin
```

Then link them together:

	keystone user-role-add --user=admin --tenant=admin --role=admin

And with the member role

	keystone user-role-add --user=admin --role=_member_ --tenant=admin

Create a service tenant:

	keystone tenant-create --name=service --description="Service Tenant"

Create services and endpoints:

Create the identity service:

	keystone service-create --name=keystone --type=identity \
			--description="OpenStack Identity"

Specify an API endpoint:

	keystone endpoint-create  --service-id=$(keystone service-list | awk '/ identity / {print $2}') \
			--publicurl=http://YOUR_IP:5000/v2.0 --internalurl=http://YOUR_IP:5000/v2.0 \
			--adminurl=http://YOUR_IP:35357/v2.0

Verify installation and configuration:

Now there is no need to bypass the authentication system, so
```
	unset OS_SERVICE_TOKEN OS_SERVICE_ENDPOINT
```

Run the following command:

	keystone --os-username=admin --os-password=ADMIN_PASS --os-auth-url=http://YOUR_IP:35357/v2.0 token-get

If it returns an authentication token, then the service is running

If it returns a error message

Authorization Failed: An unexpected error prevented the server from fulfilling your request. (HTTP 500)

One solution that worked was to stop the keystone service, then starting it manually

	sudo service keystone stop
	sudo keystone-all &

Now set enviromental variables so there is no need of specifying all the arguments in following commands

export OS_USERNAME=admin
export OS_PASSWORD=ADMIN_PASS
export OS_AUTH_URL=http://YOUR_IP:35357/v2.0
export OS_TENANT_NAME=admin

Glance:

Note: Install only if you are going to use it as a backend.

Install glance from the repositories

sudo apt-get install glance glance-common

Edit /etc/glance/glance-api.conf and /etc/glance/glance-registry.conf and edit the [database] section of each file:
```
	[database]
	connection = mysql://glance:[email protected]/glance
```

Restart Glance:

sudo service glance-api restart
sudo service glance-registry restart

Create the database:

	mysql -u root -p
		mysql> CREATE DATABASE glance;
		mysql> GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'localhost' \
			IDENTIFIED BY 'GLANCE_DBPASS';
		mysql> GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'%' \
			IDENTIFIED BY 'GLANCE_DBPASS';
		mysql> exit

And the tables:
```
	sudo glance-manage db_sync
```

It is posible that you receive an error stating that "Tables "migrate_version" have non utf8 collation, please make sure all tables are CHARSET=utf8". In that case, run the following commands:

	mysql -u root -p glance
		mysql> alter table migrate_version convert to character set utf8 collate utf8_unicode_ci;
		mysql> flush privileges;
		mysql> quit

And try to synchronize the database again

Create a glance user on the identity service:

	keystone user-create --name=glance --pass=GLANCE_PASS [email protected]
	keystone user-role-add --user=glance --tenant=service --role=admin

Edit the /etc/glance/glance-api.conf and /etc/glance/glance-registry.conf files.
- Replace GLANCE_PASS with the password you chose for the glance user in the Identity service.
- Add or modify the following keys under the [keystone_authtoken] section:
```
	[keystone_authtoken]
	auth_uri = http://YOUR_IP:5000
	auth_host = YOUR_IP
	auth_port = 35357
	auth_protocol = http
	admin_tenant_name = service
	admin_user = glance
	admin_password = GLANCE_PASS
```

Heads-up: To avoid problems when parsing this keys, it is recommended to manually write them instead of copy from the manual and paste on the file

Modify the following key under the [paste_deploy] section:
```
	[paste_deploy]
	...
	flavor = keystone
```

Register the service and create the endpoint:

	keystone service-create --name=glance --type=image --description="OpenStack Image Service"
	keystone endpoint-create --service-id=$(keystone service-list | awk '/ image / {print $2}') \
		--publicurl=http://YOUR_IP:9292 --internalurl=http://YOUR_IP:9292 --adminurl=http://YOUR_IP:9292

Restart the service with the new configuration:

	sudo service glance-registry restart
	sudo service glance-api restart

Verify the installation

Download a test image, e.g.:

mkdir /tmp/images
cd /tmp/images/
wget https://launchpadlibrarian.net/83303699/cirros-0.3.0-i386-disk.img

And upload it with the generic command:

glance image-create --name=IMAGELABEL --disk-format=FILEFORMAT --container-format=CONTAINERFORMAT --is-public=ACCESSVALUE < IMAGEFILE

Where:

IMAGELABEL: Arbitrary label. The name by which users refer to the image.

FILEFORMAT: Specifies the format of the image file. Valid formats include qcow2, raw, vhd, vmdk, vdi, iso, aki, ari, and ami. You can verify the format using the file command:

	file cirros-0.3.0-i386-disk.img
	cirros-0.3.0-i386-disk.img: QEMU QCOW Image (v2), 41126400 bytes

CONTAINERFORMAT: Specifies the container format. Valid formats include: bare, ovf, aki, ari and ami. Although this field is currently required, it is not actually used by any of the OpenStack services and has no effect on system behavior. Because the value is not used anywhere, it is safe to always specify bare as the container format.

ACCESSVALUE: Specifies image access: true - All users can view and use the image. false - Only administrators can view and use the image.

IMAGEFILE: Specifies the name of your downloaded image file.

Example: glance image-create --name=TestImage --disk-format=qcow2 --container-format=bare --is-public=true < /tmp/images/cirros-0.3.0-i386-disk.img

Swift (All-in-one installation):

Note: Install only if you are going to use it as a backend.

Swift requires a little more work to do than the previous two. Since we are deploying it in a single machine, we need to make an all-in-one installation. We could not make Keystone authentication work in this case, so we are using v1 authentication

Much of the configuration described in this guide requires escalated administrator (root) privileges; however, we assume that administrator logs in as an unprivileged user and can use sudo to run privileged commands.

Swift processes also run under a separate user and group, set by configuration option, and referenced as <your-user-name>:<your-group-name>. The default user is swift, which may not exist on your system. These instructions are intended to allow a developer to use his/her username for <your-user-name>:<your-group-name>.

We are using a loopback device as a storage system.

Install dependencies:

sudo apt-get update
sudo apt-get install curl gcc memcached rsync sqlite3 xfsprogs \
             git-core libffi-dev python-setuptools
sudo apt-get install python-coverage python-dev python-nose \
             python-simplejson python-xattr python-eventlet \
             python-greenlet python-pastedeploy \
             python-netifaces python-pip python-dnspython \
             python-mock python-swiftclient

Create the device:

	sudo mkdir /srv
	sudo truncate -s 1GB /srv/swift-disk
	sudo mkfs.xfs /srv/swift-disk

Edit /etc/fstab and append at the end:

/srv/swift-disk /mnt/sdb1 xfs loop,noatime,nodiratime,nobarrier,logbufs=8 0 0

Create the mount point and the individualized links:

	sudo mkdir /mnt/sdb1
	sudo mount /mnt/sdb1
	sudo mkdir /mnt/sdb1/1 /mnt/sdb1/2 /mnt/sdb1/3 /mnt/sdb1/4
	sudo chown ${USER}:${USER} /mnt/sdb1/*
	for x in {1..4}; do sudo ln -s /mnt/sdb1/$x /srv/$x; done
	sudo mkdir -p /srv/1/node/sdb1 /srv/2/node/sdb2 /srv/3/node/sdb3 /srv/4/node/sdb4 /var/run/swift
	sudo chown -R ${USER}:${USER} /var/run/swift
	# **Make sure to include the trailing slash after /srv/$x/**
	for x in {1..4}; do sudo chown -R ${USER}:${USER} /srv/$x/; done

Add the following lines to /etc/rc.local before the exit 0 (Remember to change your user and group names!):

	mkdir -p /var/cache/swift /var/cache/swift2 /var/cache/swift3 /var/cache/swift4
	sudo chown <your-user-name>:<your-group-name> /var/cache/swift*
	mkdir -p /var/run/swift
	chown <your-user-name>:<your-group-name> /var/run/swift

Check out the source code of swift from the git repository (following instructions will suppose you downloaded it in your home directory)
```
	cd ~
	git clone https://github.com/openstack/swift.git
```

Build a development installation of swift:

	sudo pip install PyECLib six eventlet --upgrade
	cd $HOME/swift; sudo python setup.py develop; cd -

Only if previous step failed for python version on six and eventlet, try to install manually:

wget https://pypi.python.org/packages/source/s/six/six-1.9.0.tar.gz#md5=476881ef4012262dfc8adc645ee786c4
		tar -zxvf six-1.9.0.tar.gz
		cd six-1.9.0
		sudo python setup.py install
		cd -

Only if previous step failed for python version on PyECLib with <erasurecode.h>, try:

    sudo apt-get install liberasurecode-dev
    sudo pip install -I PyECLib==1.0.7
    sudo ldconfig

Install swifts test dependencies:

	sudo pip install -r $HOME/swift/test-requirements.txt

Create /etc/rsyncd.conf:

	sudo cp $HOME/swift/doc/saio/rsyncd.conf /etc/
	sudo sed -i "s/<your-user-name>/${USER}/" /etc/rsyncd.conf

On Ubuntu, edit the following line in /etc/default/rsync:
```
	RSYNC_ENABLE=true
```
Start the rsync daemon. On Ubuntu, run:
```
	sudo service rsync restart
```
Verify rsync is accepting connections for all servers:
```
	rsync rsync://pub@localhost/
```

It should show something like this:

		account6012
		account6022
		account6032
		account6042
		container6011
		container6021
		container6031
		container6041
		object6010
		object6020
		object6030
		object6040

Configure each node:

Optionally remove an existing swift directory:
```
	sudo rm -rf /etc/swift
```

Populate the /etc/swift directory itself:

	cd $HOME/swift/doc; sudo cp -r saio/swift /etc/swift; cd -
	sudo chown -R ${USER}:${USER} /etc/swift

Update references in the Swift config files:

	find /etc/swift/ -name \*.conf | xargs sudo sed -i "s/<your-user-name>/${USER}/"

Following list shows modified files by previous command:

		/etc/swift/proxy-server.conf 
		/etc/swift/object-expirer.conf
		/etc/swift/container-reconciler.conf
		/etc/swift/account-server/1.conf
		/etc/swift/container-server/1.conf
		/etc/swift/object-server/1.conf
		/etc/swift/account-server/2.conf
		/etc/swift/container-server/2.conf
		/etc/swift/object-server/2.conf
		/etc/swift/account-server/3.conf
		/etc/swift/container-server/3.conf
		/etc/swift/object-server/3.conf
		/etc/swift/account-server/4.conf
		/etc/swift/container-server/4.conf
		/etc/swift/object-server/4.conf

Copy the SAIO scripts for resetting the environment:

	cd $HOME/swift/doc; cp -r saio/bin $HOME/bin; cd -
	chmod +x $HOME/bin/*

Since we are using a loopback device, add an environment var to subsitute /dev/sdb1 with /srv/swift-disk on the $HOME/bin/resetswift script:
```
	echo "export SAIO_BLOCK_DEVICE=/srv/swift-disk" >> $HOME/.bashrc
```

Install the sample configuration file for running tests:

	cp $HOME/swift/test/sample.conf /etc/swift/test.conf

Add an environment variable for running tests below:

	echo "export SWIFT_TEST_CONFIG_FILE=/etc/swift/test.conf" >> $HOME/.bashrc

Be sure that your PATH includes the bin directory:

	echo "export PATH=${PATH}:$HOME/bin" >> $HOME/.bashrc

Source the above environment variables into your current environment:
```
	. $HOME/.bashrc
```
Construct the initial rings using the provided script:
```
	remakerings
```
Start the main" Swift daemon processes (proxy, account, container, and object):
```
	swift-init main start
```

Testing:

Verify the funtional tests run (ignore test_cross_policy Errors):
```
	$HOME/swift/.functests
```
Verify the probe tests run:
```
	$HOME/swift/.probetests
```

Check that swift works correctly:

	swift -A http://127.0.0.1:8080/auth/v1.0 -U test:tester -K testing post container2
	echo "Everything OK" > test.txt 
	swift -A http://127.0.0.1:8080/auth/v1.0 -U test:tester -K testing upload container2 test.txt
	rm test.txt 
	swift -A http://127.0.0.1:8080/auth/v1.0 -U test:tester -K testing download container2 test.txt
	cat test.txt

Container Creation:

If previous test has been done with other container name, create the container for the service:

		swift -A http://127.0.0.1:8080/auth/v1.0 -U test:tester -K testing post container2

Preparing Django Server:

Clone the repository into a new directory (i.e. git) and create a django project in another directory (i.e. psar)

	sudo apt-get install libssl-dev libmysqlclient-dev python-virtualenv screen
	mkdir $HOME/git
	cd $HOME/git
	#Choose protocol and credentials for clone, git:// or https:// 
	git clone https://gitlab.secured-fp7.eu/secured/psar.git
	cd $HOME
            virtualenv .env
            source .env/bin/activate
            pip install django djangorestframework MySQL-python python-keystoneclient python-glanceclient python-swiftclient django-rest-swagger wrapt
            mkdir psar
	django-admin.py startproject psar psar
	cp -r git/psar/* psar/
            cd psar

By default, when you use the api you don't have to specify an auth token provided by keystone. These tokens can be very long and will make the use of the api a bit complicated. If you want to enable the token authentication, just change

	auth=False

For

	auth=True

In v1Status/views.py and PSA/constants.py

Create the database (choose your own DB_USER and DB_PASS):

	mysql -u root -p
		mysql> CREATE DATABASE PSAR;
		mysql> GRANT ALL PRIVILEGES ON PSAR.* TO 'DB_USER'@'localhost' \
			IDENTIFIED BY 'DB_PASS';
		mysql> GRANT ALL PRIVILEGES ON PSAR.* TO 'DB_USER'@'%' \
			IDENTIFIED BY 'DB_PASS';
		mysql> exit

Modify the database information on psar/PSA/settings.py (replace DB_USER and DB_PASS with previous chosen values) :

	DATABASES = {
	   'default': {

	        'ENGINE': 'django.db.backends.mysql',
   			'NAME':'PSAR',
    		'USER': os.getenv('DATABASE_USER','DB_USER'),
    		'PASSWORD': os.getenv('DATABASE_PASS', 'DB_PASS'),	
		'HOST': 'localhost',   # Or an IP Address that your DB is hosted on
    		'PORT': '3306',
			}
	}

Synchronize the database

	python manage.py makemigrations
	python manage.py migrate

#admin Running the server: Before running the server, check if all the openstack services are running. If not, start them:

	sudo service keystone start
 	sudo service glance-registry start
            sudo service glance-api start	
	sudo swift-init main start

Modify the default values on PSA/constants.py, in particular:

The IP address of your PSAR ('your_ip' in YOUR_IP )
OpenStack credentials ( 'admin' in ADMIN_USER, ADMIN_PASS and TENANT_NAME)

Token based authentication ( False in auth)

YOUR_IP = os.getenv('YOUR_IP', 'your_ip')
ADMIN_USER = os.getenv('OS_USERNAME','admin')
ADMIN_PASS = os.getenv('OS_PASSWORD', 'admin')
TENANT_NAME= os.getenv('OS_TENANT_NAME','admin')
auth=os.getenv('PSAR_AUTH_ON',False)

Alternatively, you can define environment variables for all this values before starting the server.

	export YOUR_IP=your_ip
	export OS_USERNAME=admin
	export OS_PASSWORD=admin
	export OS_TENANT_NAME=admin
	export PSAR_AUTH_ON=True

Now you can run the server (make sure you have virtualenv active) and YOUR_IP must be real IP address:

	python manage.py runserver YOUR_IP:8080

If you want to run in background use screen application: screen -S PSAR source .env/bin/activate cd $HOME/psar python manage.py runserver YOUR_IP:8080

Leave running the session with Ctrl+a+d

Now you can access the api, according to the documentation.

You can access to the API reference using the URL http://YOUR_IP:8080/docs/

Update documentation page:

To show a SECURED-themed documentation page, copy the files in the directory "change_doc" in the corresponding place:

base.html -> .env/lib/python2.7/site-packages/rest_framework_swagger/templates/rest_framework_swagger/base.html
logo_small.png -> .env/lib/python2.7/site-packages/rest_framework_swagger/static/rest_framework_swagger/images/logo_small.png
screen.css -> .env/lib/python2.7/site-packages/rest_framework_swagger/static/rest_framework_swagger/css/screen.css
rest_framework_swagger.css -> .env/lib/python2.7/site-packages/rest_framework_swagger/static/rest_framework_swagger/css/rest_framework_swagger.css

Securing the server:

If you want to access the server through https (thus encrypting the petitions and responses), you have to install nginx

	sudo apt-get install nginx

Now, you have to create a certificate for the server. In this guide we are using a self signed certificate.

First, generate a server key:

	openssl genrsa -des3 -out psar.key 2048

You will have to enter a password for the key

Now, generate a Certificate Signing Request:

	openssl req -new -key psar.key -out psar.csr

You will be asked some infomation (Organization name, country...). It's important that the Common Name is the IP and port in which the server will be running

Now, sign the certificate:

openssl x509 -req -days 365 -in psar.csr -signkey psar.key -out psar.crt

Finally, create a version of the key that doesn't require password:

openssl rsa -in psar.key -out psar.key.insecure
mv psar.key psar.key.secure
mv psar.key.insecure psar.key

You will have to pass the certificate (psar.crt) to the clients, and add it to the list of trusted certificates in the clients machine. The exact commands depend on the OS of the machine.

The nginx.conf file contains the configuration needed to run the PSAR in https mode, but you will need to modify it to work: Replace YOUR_IP with the IP of the server, and specify the absolute route to the certificat, key and static folder (the server's folder +'/static')

Once the file is ready, copy it to its location:

sudo cp nginx.conf /etc/nginx/sites-enabled/psar

And restart nginx:

sudo /etc/init.d/nginx restart

Run this command to collect all static files, needed for the documentation:

python manage.py collectstatic

Now you will have to run an instance of the UPR listening on 127.0.0.1:8888 :

python manage.py runserver 127.0.0.1:8888

While this instance is running, you will have access to the API via HTTPS using the IP and port defined in nginx.conf

If you want to run in background use screen application:

	screen -S PSAR
	source .env/bin/activate
	cd $HOME/psar
	python manage.py runserver 127.0.0.1:8888

Leave running the session with Ctrl+a+d

Installing and configuring OpenMANO

This additional installation steps are needed only if you are going to use OpenMANO as backend.

Installing and configuring Openmano:

Use the next guide for do the automatic installation, and configuration.

OpenMANO Getting Started

Openvim

Actions related to the infrastructure must be conveyed through the openvim client.

Let's configure the openvim CLI client. Needed if you have changed the openvimd.cfg file

./openvim config                           # show openvim related variables

#To change variables run
export OPENVIM_HOST=<http_host of openvimd.cfg>
export OPENVIM_PORT=<http_port of openvimd.cfg>
export OPENVIM_ADMIN_PORT=<http_admin_port of openvimd.cfg>

#You can insert at .bashrc for authomatic loading at login:
echo "export OPENVIM_HOST=<...>" >> /home/${USER}/.bashrc
...

Let's attach compute nodes. For choose the mode, you need change the file $HOME_OPENMANO/openmano/openvim/openvimd.cfg. We use 'test' mode.

In 'test' mode we need to provide fake compute nodes with all the necessary information:

./openvim host-add test/hosts/host-example0.json 
./openvim host-add test/hosts/host-example1.json 
./openvim host-add test/hosts/host-example2.json 
./openvim host-add test/hosts/host-example3.json 
./openvim host-list                        #-v,-vv,-vvv for verbosity levels

Let's list the external networks:

./openvim net-list

Let's create some external networks in openvim. These networks are public and can be used by any VNF. It must be noticed that these networks must be pre-provisioned in the compute nodes in order to be effectively used by the VNFs. The pre-provision will be skipped since we are in test mode. Four networks will be created:

default -> default NAT network provided by libvirt. By creating this network, VMs will be able to connect to default network in the same host where they are deployed.

./openvim net-create test/networks/net-example0.yaml

Let's list the external networks:

./openvim net-list
35671f9e-e2b4-11e4-a3c9-52540032c4fa   default

Now let's create a new tenant "admin":

$ openvim tenant-create
tenant name? admin
tenant description (admin)?
<uuid>   admin   Created

Take the uuid of the tenant and update the environment variables associated to the openvim tenant:

export OPENVIM_TENANT=<obtained uuid>
#echo "export OPENVIM_TENANT=<obtained uuid>" >> /home/${USER}/.bashrc
openvim config                             #show openvim env variables

Openmano

Let's configure the openmano CLI client. This is only necessary if you have changed the file 'openmanod.cfg'

Create a directory from images.
```
  mkdir $HOME/images
```

If you want use other directory from PSA images you can change pathMano in '/psar/psar.conf'

List the environment variables

  ./openmano config                      #show openmano env variables

Update the environment variables accordingly:

  export OPENMANO_HOST=<http_host of openmanod.cfg>
  export OPENMANO_PORT=<http_port of openmanod.cfg>
  ./openmano config                      #show openmano env variables

Let's create a new tenant:

  ./openmano tenant-create mytenant --description=tenant-description
  ./openmano tenant-list                           #show list of tenants uuid and name

Take the uuid and update the environment variable associated to the openmano tenant:

  export OPENMANO_TENANT=<obtained uuid> 
  ./openmano config                                #show openmano env variables

Let's create a new datacenter 'mydc' in openmano, attach the datacenter 'mydc' and VIM tenant "admin" (identified by its uuid provided by openvim), and update the external nets automatically from the ones in openvim.

  ./openmano datacenter-create mydc http://localhost:9080/openvim
  ./openmano datacenter-list --all                           #show all datacenters
  ./openmano datacenter-attach mydc --vim-tenant-id <uuid>   #attach the datacenter mydc and openvim tenant id to the openmano tenant 'mytenant'
  ./openmano datacenter-list                                 #show datacenters associated to our tenant
  ./openmano datacenter-net-update mydc
  Edit datacenter mydc (y/N)? y
  35671f9e-e2b4-11e4-a3c9-52540032c4fa   default
  ./openmano datacenter-net-list mydc
  35671f9e-e2b4-11e4-a3c9-52540032c4fa   default              2015-04-14T17:36:32

Openmano-gui

First, edit and configure the ./openmano-gui/config.php file. It is needed to get the tenant added at openmano in the previous step and set the $mano_tenant variable properly. In case of using a different configuration than the explained above, it is needed to modify other variables.

openmano-gui is accesible with url http://server/openmano. It contain three main modules:

Scenarios. Left side: scenario and instance scenario list. Right side: scenario/instance details of the left side selected element. The upper button allows:
- New: To create a new scenario dragging and drop the left VNF/nets catalogue. You can connect the VNF interfaces among them with the mouse. Do not forget to save.
- Action over the left side selected scenario, as Save its topology changes, Deploy it, Clone in order to create a new one using the current scenario as starting point, Delete, ...
- Action over left side selected instance-scenario, as Update to see the current status of running VNFs, Delete to undeploy the instance, Start, Shutdown, Force off, Reboot, Rebuild over selected VNFs or/and VMs of the instance, ...
VNFs. Left side: list of VNF and external nets. Right side: under construction
Physical. Left side: list of openvim compute nodes and deployed virtual machines. Right side: under construction

In the Django Server:

Update the server
- If you are already running a PSAR instance, access to the virtual environment where you are running it, stop and install additional packages:
```
  screen -x PSAR
  Ctrl+c (Kill server)
  pip install paramiko
  pip install argcomplete
```
- If it is the first time, create a background session and install additional packages:
```
  screen -S PSAR
  source .env/bin/activate
  cd $HOME/psar
  pip install paramiko
  pip install argcomplete
```

Replace 'obtained uuid', 'Openmano ip', 'Openmano port', 'Openmano user', 'Openmano pass', '$HOME_OPENMANO' and '$HOME'

  [mano]
  tenant = obtained uuid
  ipMano = Openmano ip
  portMano = Openmano port
  userMano = Openmano user
  passMano = Openmano pass

  pathMano = $HOME_OPENMANO/images/
  vnfrepo= $HOME_OPENMANO/openmano/openmano/vnfrepo/
  pathlocalpsar=$HOME/psar/
  pathfiles= $HOME/psar/files/
  pathYamlVnf=$HOME/psar/VNFrepo/

Default path for manifest and plugin is 'pathfiles=$HOME/psar/files', and for VNFs repository is 'pathfiles=$HOME/psar/VNFrepo', you need to create them (or the ones choosen):
```
  mkdir $HOME/psar/files
  mkdir $HOME/psar/VNFrepo
```
Modify the default values on psar/psar.conf With this variable you can configure use OPENMANO instead of default OPENSTACK value:
```
  [repository]
  repository = OPENMANO
```

Restart the instance of PSAR

  screen -x PSAR
  cd $HOME/psar
  python manage.py runserver 127.0.0.1:8888

Leave running the session with Ctrl+a+d

Maintenance: Clear PSAR database content

This steps perform a hard reset of the PSAR database, removing a existing DB and creating a new empty one

1.Stop the PSAR Server.

$screen -x psar
$Ctrl+C

2.Delete and Re-create the database: First if exist remove "/psar/PSA/migrations" directory.

	mysql -u root -p
	    mysql> DROP DATABASE PSAR;
		mysql> CREATE DATABASE PSAR;
		mysql> GRANT ALL PRIVILEGES ON PSAR.* TO 'DATABASE_USER'@'localhost'IDENTIFIED BY 'DATABASE_PASS';
		mysql> GRANT ALL PRIVILEGES ON PSAR.* TO 'DATABASE_USER'@'%' IDENTIFIED BY 'DATABASE_PASS';
		mysql> exit

3.Regenerate empty database schema:

    $cd $HOME
    $source env_psar/bin/activate
    $cd psar
    $python manage.py makemigrations PSA
    $python manage.py migrate

4.Start the UPR

    $cd $HOME
    $screen -S psar
    $source start_psar.sh
    Ctrl+a+d

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Introduction

Openstack Backend

OpenMANO Backend

Repository content:

Installing and configuring openstack:

Keystone:

Installation:

Creating tenants, users and services:

Create services and endpoints:

Verify installation and configuration:

Glance:

Verify the installation

Swift (All-in-one installation):

Testing:

Container Creation:

Preparing Django Server:

Update documentation page:

Securing the server:

Installing and configuring OpenMANO

Installing and configuring Openmano:

Openvim

Openmano

Openmano-gui

In the Django Server:

Maintenance: Clear PSAR database content

References:

About

Releases

Packages

Languages

Name		Name	Last commit message	Last commit date
Latest commit History 2 Commits
PSA		PSA
change_doc		change_doc
client		client
images		images
tests		tests
v1status		v1status
.gitignore		.gitignore
LICENSE		LICENSE
README.md		README.md
manage.py		manage.py
nginx.conf		nginx.conf
psar.conf		psar.conf

License

SECURED-FP7/secured-psar

Folders and files

Latest commit

History

Repository files navigation

Introduction

Openstack Backend

OpenMANO Backend

Repository content:

Installing and configuring openstack:

Keystone:

Installation:

Creating tenants, users and services:

Create services and endpoints:

Verify installation and configuration:

Glance:

Verify the installation

Swift (All-in-one installation):

Testing:

Container Creation:

Preparing Django Server:

Update documentation page:

Securing the server:

Installing and configuring OpenMANO

Installing and configuring Openmano:

Openvim

Openmano

Openmano-gui

In the Django Server:

Maintenance: Clear PSAR database content

References:

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages