Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Ldo orbitool 2 #284

Open
wants to merge 17 commits into
base: v2.1.x
Choose a base branch
from
Open

Conversation

think-simple
Copy link

  • replaced photo with render-picture from the orbitool2 board
  • renamed old wiring.drawio.svg to wiring_photo.drawio.svg just in case

- board.webp                                - wirering diagram
- wirering.drawio.svg                    - wirering diagram as svg file
- nitehawk-36-board.png              - made this photo from my board
- nitehawk-36-usb-board.png       - source: https://www.filastruder.com/cdn/shop/files/NiteHawk-SB_05_2048x.jpg?v=1720633207
- beacon3d.png                             - removed "RevH"  source: http://beacon3d.com/wp-content/uploads/2023/11/RevH-LP-100x100.png

additional:
- dfubooting.jpg                            - source: https://docs.ldomotors.com/nk36_buttons.jpg
- nh36_pcb_pinout.jpg                  - source: https://docs.ldomotors.com/nh36_pcb_pinout1.jpg
- system_overview-1.jpg               - source: https://docs.ldomotors.com/system_overview-1.jpg
- board.webp                                - wirering diagram
- wirering.drawio.svg                    - wirering diagram as svg file
- nitehawk-36-board.png              - made this photo from my board
- nitehawk-36-usb-board.png       - source: https://www.filastruder.com/cdn/shop/files/NiteHawk-SB_05_2048x.jpg?v=1720633207
- beacon3d.png                             - removed "RevH"  source: http://beacon3d.com/wp-content/uploads/2023/11/RevH-LP-100x100.png

additional:
- dfubooting.jpg                            - source: https://docs.ldomotors.com/nk36_buttons.jpg
- nh36_pcb_pinout.jpg                  - source: https://docs.ldomotors.com/nh36_pcb_pinout1.jpg
- system_overview-1.jpg               - source: https://docs.ldomotors.com/system_overview-1.jpg
graphics for the Toolheadboard and the USB-Adapterboard:
orbitool2.png
orbitool2_usb-adapter.png

--> 3-wire-x_endstop:
board.webp             
wiring.drawio.svg    

--> 2-wire-x_endstop:
wiring_x_endstop-2-wire.drawio.svg 
board_x_enndstop-2-wire.webp
- X-Endstop on 2PIN (PB0,GND)
   -> draw an optional 5V Line to RGB PIN (+5V)
- Added RGB-SK6812 as an example for RGB. Created the graphics in onshape and exported it to avoid copyright problems

--> if RGB isn't wanted I can delete it and upload without
wrong PIN (took the one for Probe)
- Changed the x_endstop PIN from 3Wire probe-pin to 2Wire x_endstop pin.
--> had to the 5V  from the probe pin as the Jumper for 5V/24V Voltage is used for both Part Cooling Fans.
--> Added RGB, the graphics for this I created myself to avoid any copyright issues, if RGB is not wanted just gibe me a message.
- replaced photo with render-picture from the orbitool2 board
- renamed old wiring.drawio.svg to wiring_photo.drawio.svg just in case
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.

1 participant