Merge 4.9.262 into android-4.9-q

Changes in 4.9.262
	uapi: nfnetlink_cthelper.h: fix userspace compilation error
	ethernet: alx: fix order of calls on resume
	ath9k: fix transmitting to stations in dynamic SMPS mode
	net: Fix gro aggregation for udp encaps with zero csum
	net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
	can: skb: can_skb_set_owner(): fix ref counting if socket was closed before setting skb ownership
	can: flexcan: assert FRZ bit in flexcan_chip_freeze()
	can: flexcan: enable RX FIFO after FRZ/HALT valid
	netfilter: x_tables: gpf inside xt_find_revision()
	cifs: return proper error code in statfs(2)
	Revert "mm, slub: consider rest of partial list if acquire_slab() fails"
	net/mlx4_en: update moderation when config reset
	net: sched: avoid duplicates in classes dump
	net: lapbether: Remove netif_start_queue / netif_stop_queue
	net: davicom: Fix regulator not turned off on failed probe
	net: davicom: Fix regulator not turned off on driver removal
	media: usbtv: Fix deadlock on suspend
	udf: fix silent AED tagLocation corruption
	mmc: mxs-mmc: Fix a resource leak in an error handling path in 'mxs_mmc_probe()'
	mmc: mediatek: fix race condition between msdc_request_timeout and irq
	powerpc/perf: Record counter overflow always if SAMPLE_IP is unset
	PCI: xgene-msi: Fix race in installing chained irq handler
	s390/smp: __smp_rescan_cpus() - move cpumask away from stack
	scsi: libiscsi: Fix iscsi_prep_scsi_cmd_pdu() error handling
	ALSA: hda/hdmi: Cancel pending works before suspend
	ALSA: hda: Avoid spurious unsol event handling during S3/S4
	ALSA: usb-audio: Fix "cannot get freq eq" errors on Dell AE515 sound bar
	s390/dasd: fix hanging DASD driver unbind
	mmc: core: Fix partition switch time for eMMC
	scripts/recordmcount.{c,pl}: support -ffunction-sections .text.* section names
	Goodix Fingerprint device is not a modem
	usb: gadget: f_uac2: always increase endpoint max_packet_size by one audio slot
	usb: renesas_usbhs: Clear PIPECFG for re-enabling pipe with other EPNUM
	xhci: Improve detection of device initiated wake signal.
	USB: serial: io_edgeport: fix memory leak in edge_startup
	USB: serial: ch341: add new Product ID
	USB: serial: cp210x: add ID for Acuity Brands nLight Air Adapter
	USB: serial: cp210x: add some more GE USB IDs
	usbip: fix stub_dev to check for stream socket
	usbip: fix vhci_hcd to check for stream socket
	usbip: fix vudc to check for stream socket
	usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
	usbip: fix vhci_hcd attach_store() races leading to gpf
	staging: rtl8192u: fix ->ssid overflow in r8192_wx_set_scan()
	staging: rtl8188eu: prevent ->ssid overflow in rtw_wx_set_scan()
	staging: rtl8712: unterminated string leads to read overflow
	staging: rtl8188eu: fix potential memory corruption in rtw_check_beacon_data()
	staging: ks7010: prevent buffer overflow in ks_wlan_set_scan()
	staging: rtl8712: Fix possible buffer overflow in r8712_sitesurvey_cmd
	staging: rtl8192e: Fix possible buffer overflow in _rtl92e_wx_set_scan
	staging: comedi: addi_apci_1032: Fix endian problem for COS sample
	staging: comedi: addi_apci_1500: Fix endian problem for command sample
	staging: comedi: adv_pci1710: Fix endian problem for AI command data
	staging: comedi: das6402: Fix endian problem for AI command data
	staging: comedi: das800: Fix endian problem for AI command data
	staging: comedi: dmm32at: Fix endian problem for AI command data
	staging: comedi: me4000: Fix endian problem for AI command data
	staging: comedi: pcl711: Fix endian problem for AI command data
	staging: comedi: pcl818: Fix endian problem for AI command data
	sh_eth: fix TRSCER mask for R7S72100
	NFSv4.2: fix return value of _nfs4_get_security_label()
	block: rsxx: fix error return code of rsxx_pci_probe()
	configfs: fix a use-after-free in __configfs_open_file
	alpha: add $(src)/ rather than $(obj)/ to make source file path
	alpha: merge build rules of division routines
	alpha: make short build log available for division routines
	alpha: Package string routines together
	alpha: switch __copy_user() and __do_clean_user() to normal calling conventions
	powerpc/64s: Fix instruction encoding for lis in ppc_function_entry()
	binfmt_misc: fix possible deadlock in bm_register_write
	hwmon: (lm90) Fix max6658 sporadic wrong temperature reading
	KVM: arm64: Fix exclusive limit for IPA size
	iio: imu: adis16400: release allocated memory on failure
	iio: imu: adis16400: fix memory leak
	xen/events: reset affinity of 2-level event when tearing it down
	xen/events: don't unmask an event channel when an eoi is pending
	xen/events: avoid handling the same event on two cpus at the same time
	Linux 4.9.262

Signed-off-by: Greg Kroah-Hartman <[email protected]>
Change-Id: Ie9b6330a4a2f37c089401f67beadb5ede1f679ba

Makefile

@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 9
-SUBLEVEL = 261
+SUBLEVEL = 262
 EXTRAVERSION =
 NAME = Roaring Lionus
 

arch/alpha/include/asm/uaccess.h

@@ -341,45 +341,17 @@ __asm__ __volatile__("1: stb %r2,%1\n"				\
  * Complex access routines
  */
 
-/* This little bit of silliness is to get the GP loaded for a function
-   that ordinarily wouldn't.  Otherwise we could have it done by the macro
-   directly, which can be optimized the linker.  */
-#ifdef MODULE
-#define __module_address(sym)		"r"(sym),
-#define __module_call(ra, arg, sym)	"jsr $" #ra ",(%" #arg ")," #sym
-#else
-#define __module_address(sym)
-#define __module_call(ra, arg, sym)	"bsr $" #ra "," #sym " !samegp"
-#endif
-
-extern void __copy_user(void);
-
-extern inline long
-__copy_tofrom_user_nocheck(void *to, const void *from, long len)
-{
-	register void * __cu_to __asm__("$6") = to;
-	register const void * __cu_from __asm__("$7") = from;
-	register long __cu_len __asm__("$0") = len;
-
-	__asm__ __volatile__(
-		__module_call(28, 3, __copy_user)
-		: "=r" (__cu_len), "=r" (__cu_from), "=r" (__cu_to)
-		: __module_address(__copy_user)
-		  "0" (__cu_len), "1" (__cu_from), "2" (__cu_to)
-		: "$1", "$2", "$3", "$4", "$5", "$28", "memory");
-
-	return __cu_len;
-}
+extern long __copy_user(void *to, const void *from, long len);
 
-#define __copy_to_user(to, from, n)					\
-({									\
-	__chk_user_ptr(to);						\
-	__copy_tofrom_user_nocheck((__force void *)(to), (from), (n));	\
+#define __copy_to_user(to, from, n)			\
+({							\
+	__chk_user_ptr(to);				\
+	__copy_user((__force void *)(to), (from), (n));	\
 })
-#define __copy_from_user(to, from, n)					\
-({									\
-	__chk_user_ptr(from);						\
-	__copy_tofrom_user_nocheck((to), (__force void *)(from), (n));	\
+#define __copy_from_user(to, from, n)			\
+({							\
+	__chk_user_ptr(from);				\
+	__copy_user((to), (__force void *)(from), (n));	\
 })
 
 #define __copy_to_user_inatomic __copy_to_user
@@ -389,7 +361,7 @@ extern inline long
 copy_to_user(void __user *to, const void *from, long n)
 {
 	if (likely(__access_ok((unsigned long)to, n, get_fs())))
-		n = __copy_tofrom_user_nocheck((__force void *)to, from, n);
+		n = __copy_user((__force void *)to, from, n);
 	return n;
 }
 
@@ -404,21 +376,7 @@ copy_from_user(void *to, const void __user *from, long n)
 	return res;
 }
 
-extern void __do_clear_user(void);
-
-extern inline long
-__clear_user(void __user *to, long len)
-{
-	register void __user * __cl_to __asm__("$6") = to;
-	register long __cl_len __asm__("$0") = len;
-	__asm__ __volatile__(
-		__module_call(28, 2, __do_clear_user)
-		: "=r"(__cl_len), "=r"(__cl_to)
-		: __module_address(__do_clear_user)
-		  "0"(__cl_len), "1"(__cl_to)
-		: "$1", "$2", "$3", "$4", "$5", "$28", "memory");
-	return __cl_len;
-}
+extern long __clear_user(void __user *to, long len);
 
 extern inline long
 clear_user(void __user *to, long len)
@@ -428,9 +386,6 @@ clear_user(void __user *to, long len)
 	return len;
 }
 
-#undef __module_address
-#undef __module_call
-
 #define user_addr_max() \
         (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL)
 

arch/alpha/lib/Makefile

@@ -20,12 +20,8 @@ lib-y =	__divqu.o __remqu.o __divlu.o __remlu.o \
 	checksum.o \
 	csum_partial_copy.o \
 	$(ev67-y)strlen.o \
-	$(ev67-y)strcat.o \
-	strcpy.o \
-	$(ev67-y)strncat.o \
-	strncpy.o \
-	$(ev6-y)stxcpy.o \
-	$(ev6-y)stxncpy.o \
+	stycpy.o \
+	styncpy.o \
 	$(ev67-y)strchr.o \
 	$(ev67-y)strrchr.o \
 	$(ev6-y)memchr.o \
@@ -46,11 +42,20 @@ AFLAGS___remqu.o =       -DREM
 AFLAGS___divlu.o = -DDIV       -DINTSIZE
 AFLAGS___remlu.o =       -DREM -DINTSIZE
 
-$(obj)/__divqu.o: $(obj)/$(ev6-y)divide.S
-	$(cmd_as_o_S)
-$(obj)/__remqu.o: $(obj)/$(ev6-y)divide.S
-	$(cmd_as_o_S)
-$(obj)/__divlu.o: $(obj)/$(ev6-y)divide.S
-	$(cmd_as_o_S)
-$(obj)/__remlu.o: $(obj)/$(ev6-y)divide.S
-	$(cmd_as_o_S)
+$(addprefix $(obj)/,__divqu.o __remqu.o __divlu.o __remlu.o): \
+						$(src)/$(ev6-y)divide.S FORCE
+	$(call if_changed_rule,as_o_S)
+
+# There are direct branches between {str*cpy,str*cat} and stx*cpy.
+# Ensure the branches are within range by merging these objects.
+
+LDFLAGS_stycpy.o := -r
+LDFLAGS_styncpy.o := -r
+
+$(obj)/stycpy.o: $(obj)/strcpy.o $(obj)/$(ev67-y)strcat.o \
+		 $(obj)/$(ev6-y)stxcpy.o FORCE
+	$(call if_changed,ld)
+
+$(obj)/styncpy.o: $(obj)/strncpy.o $(obj)/$(ev67-y)strncat.o \
+		 $(obj)/$(ev6-y)stxncpy.o FORCE
+	$(call if_changed,ld)

arch/alpha/lib/clear_user.S

@@ -8,21 +8,6 @@
  * right "bytes left to zero" value (and that it is updated only _after_
  * a successful copy).  There is also some rather minor exception setup
  * stuff.
- *
- * NOTE! This is not directly C-callable, because the calling semantics
- * are different:
- *
- * Inputs:
- *	length in $0
- *	destination address in $6
- *	exception pointer in $7
- *	return address in $28 (exceptions expect it there)
- *
- * Outputs:
- *	bytes left to copy in $0
- *
- * Clobbers:
- *	$1,$2,$3,$4,$5,$6
  */
 #include <asm/export.h>
 
@@ -38,78 +23,79 @@
 	.set noreorder
 	.align 4
 
-	.globl __do_clear_user
-	.ent __do_clear_user
-	.frame	$30, 0, $28
+	.globl __clear_user
+	.ent __clear_user
+	.frame	$30, 0, $26
 	.prologue 0
 
 $loop:
 	and	$1, 3, $4	# e0    :
 	beq	$4, 1f		# .. e1 :
 
-0:	EX( stq_u $31, 0($6) )	# e0    : zero one word
+0:	EX( stq_u $31, 0($16) )	# e0    : zero one word
 	subq	$0, 8, $0	# .. e1 :
 	subq	$4, 1, $4	# e0    :
-	addq	$6, 8, $6	# .. e1 :
+	addq	$16, 8, $16	# .. e1 :
 	bne	$4, 0b		# e1    :
 	unop			#       :
 
 1:	bic	$1, 3, $1	# e0    :
 	beq	$1, $tail	# .. e1 :
 
-2:	EX( stq_u $31, 0($6) )	# e0    : zero four words
+2:	EX( stq_u $31, 0($16) )	# e0    : zero four words
 	subq	$0, 8, $0	# .. e1 :
-	EX( stq_u $31, 8($6) )	# e0    :
+	EX( stq_u $31, 8($16) )	# e0    :
 	subq	$0, 8, $0	# .. e1 :
-	EX( stq_u $31, 16($6) )	# e0    :
+	EX( stq_u $31, 16($16) )	# e0    :
 	subq	$0, 8, $0	# .. e1 :
-	EX( stq_u $31, 24($6) )	# e0    :
+	EX( stq_u $31, 24($16) )	# e0    :
 	subq	$0, 8, $0	# .. e1 :
 	subq	$1, 4, $1	# e0    :
-	addq	$6, 32, $6	# .. e1 :
+	addq	$16, 32, $16	# .. e1 :
 	bne	$1, 2b		# e1    :
 
 $tail:
 	bne	$2, 1f		# e1    : is there a tail to do?
-	ret	$31, ($28), 1	# .. e1 :
+	ret	$31, ($26), 1	# .. e1 :
 
-1:	EX( ldq_u $5, 0($6) )	# e0    :
+1:	EX( ldq_u $5, 0($16) )	# e0    :
 	clr	$0		# .. e1 :
 	nop			# e1    :
 	mskqh	$5, $0, $5	# e0    :
-	EX( stq_u $5, 0($6) )	# e0    :
-	ret	$31, ($28), 1	# .. e1 :
+	EX( stq_u $5, 0($16) )	# e0    :
+	ret	$31, ($26), 1	# .. e1 :
 
-__do_clear_user:
-	and	$6, 7, $4	# e0    : find dest misalignment
+__clear_user:
+	and	$17, $17, $0
+	and	$16, 7, $4	# e0    : find dest misalignment
 	beq	$0, $zerolength # .. e1 :
 	addq	$0, $4, $1	# e0    : bias counter
 	and	$1, 7, $2	# e1    : number of bytes in tail
 	srl	$1, 3, $1	# e0    :
 	beq	$4, $loop	# .. e1 :
 
-	EX( ldq_u $5, 0($6) )	# e0    : load dst word to mask back in
+	EX( ldq_u $5, 0($16) )	# e0    : load dst word to mask back in
 	beq	$1, $oneword	# .. e1 : sub-word store?
 
-	mskql	$5, $6, $5	# e0    : take care of misaligned head
-	addq	$6, 8, $6	# .. e1 :
-	EX( stq_u $5, -8($6) )	# e0    :
+	mskql	$5, $16, $5	# e0    : take care of misaligned head
+	addq	$16, 8, $16	# .. e1 :
+	EX( stq_u $5, -8($16) )	# e0    :
 	addq	$0, $4, $0	# .. e1 : bytes left -= 8 - misalignment
 	subq	$1, 1, $1	# e0    :
 	subq	$0, 8, $0	# .. e1 :
 	br	$loop		# e1    :
 	unop			#       :
 
 $oneword:
-	mskql	$5, $6, $4	# e0    :
+	mskql	$5, $16, $4	# e0    :
 	mskqh	$5, $2, $5	# e0    :
 	or	$5, $4, $5	# e1    :
-	EX( stq_u $5, 0($6) )	# e0    :
+	EX( stq_u $5, 0($16) )	# e0    :
 	clr	$0		# .. e1 :
 
 $zerolength:
 $exception:
-	ret	$31, ($28), 1	# .. e1 :
+	ret	$31, ($26), 1	# .. e1 :
 
-	.end __do_clear_user
-	EXPORT_SYMBOL(__do_clear_user)
+	.end __clear_user
+	EXPORT_SYMBOL(__clear_user)