v0.8.0

Project page: https://opensourceebike.github.io/

Changelog:

• Battery SOC now resets every time the battery voltage is over the configured value (previous was resetting only at wireless board power on)
• corrected Battery Voltage field
• added Motor Power field
• hided Street Mode from configurations as currently there is no way to active it
• added Battery Resistance Estimated field
• corrected all the decimals on the various fields

To install:

• you must flash the TSDZ2 motor firmware TSDZ2-v1.1.1.hex.
• you must update the TSDZ2 wireless board firmware to TSDZ2_wireless_ota_update-v0.8.0.zip
• in the case you use the TSDZ2 wireless remote, you must update his firmware to TSDZ2_wireless_remote_ota_update-v0.7.2.zip
• in the case you use the Android mobile app, you must install the TSDZ2_wireless_v0.4.0.apk Android app

Download this files under the Assets pane.

v0.7.0

This release was tested on a real EBike with TSDZ2 motor and works well.

Project page: https://opensourceebike.github.io/

• you must flash the TSDZ2 motor firmware TSDZ2-v1.1.1.hex.
• you must update the TSDZ2 wireless board firmware to TSDZ2_wireless_ota_update-v0.7.0.zip
• in the case you use the TSDZ2 wireless remote, you must update his firmware to TSDZ2_wireless_remote_ota_update-v0.7.2.zip
• in the case you use the Android mobile app, you must install the TSDZ2_wireless_v0.3.1.apk Android app

Download this files under the Assets pane.

v0.6.0

This release was tested on a real EBike with TSDZ2 motor and works well.

Project page: https://opensourceebike.github.io/

• you must flash the TSDZ2 motor firmware TSDZ2-v1.1.1.hex.
• you must update the TSDZ2 wireless board firmware to TSDZ2_wireless_ota_update-v0.6.0.zip
• in the case you use the TSDZ2 wireless remote, you must update his firmware to TSDZ2_wireless_remote_ota_update-v0.6.1.zip
• in the case you use the Android mobile app, you must install the TSDZ2_wireless_v0.3.1.apk Android app

Download this files under the Assets pane.

V0.3.1

corrected issue with wheel speed

V0.3.0

INSTRUCTIONS

On the TSD2 motor:

1. install the firmware V1.1.0: https://github.com/OpenSourceEBike/TSDZ2_wiki/wiki/How-to-install-the-Flexible-OpenSource-firmware

On the TSDZ2 wireless board:

1. install the bootloader following this instructions: https://github.com/OpenSourceEBike/TSDZ2_wireless-bootloader
2. install the firmware file TSDZ2_wireless_ota_update-v0.3.0.zip

On your Android phone:

1. install the TSDZ2_wireless_v0.3.0.apk

Changelog:

• improved the motor on/off icons
• other small improvements

V0.2.0

Improved motor startup state. Works for mobile app v0.2.0