Jitsi Meet on Docker

Jitsi is a set of Open Source projects that allows you to easily build and deploy secure videoconferencing solutions.

Jitsi Meet is a fully encrypted, 100% Open Source video conferencing solution that you can use all day, every day, for free — with no account needed.

This repository contains the necessary tools to run a Jitsi Meet stack on Docker using Docker Compose.

Quick start

In order to quickly run Jitsi Meet on a machine running Docker and Docker Compose, follow these steps:

Clone this repository to your computer.
- git clone https://github.com/jitsi/docker-jitsi-meet && cd docker-jitsi-meet
Create a .env file by copying and adjusting env.example
- cp env.example .env
- Set strong passwords in the security section options: ./gen-passwords.sh
Create required CONFIG directories
- mkdir -p ~/.jitsi-meet-cfg/{web/letsencrypt,transcripts,prosody,jicofo,jvb,jigasi,jibri}
Run docker-compose up -d.
Access the web UI at https://localhost:8443 (or a different port, in case you edited the compose file).

Note that HTTP (not HTTPS) is also available (on port 8000, by default), but that's e.g. for a reverse proxy setup; direct access via HTTP instead HTTPS leads to WebRTC errors such as Failed to access your microphone/camera: Cannot use microphone/camera for an unknown reason. Cannot read property 'getUserMedia' of undefined or navigator.mediaDevices is undefined.

If you want to use jigasi too, first configure your env file with SIP credentials and then run Docker Compose as follows: docker-compose -f docker-compose.yml -f jigasi.yml up

If you want to enable document sharing via Etherpad, configure it and run Docker Compose as follows: docker-compose -f docker-compose.yml -f etherpad.yml up

If you want to use jibri too, first configure a host as described in JItsi BRoadcasting Infrastructure configuration section and then run Docker Compose as follows: docker-compose -f docker-compose.yml -f jibri.yml up -d or to use jigasi too: docker-compose -f docker-compose.yml -f jigasi.yml -f jibri.yml up -d

Security note

This setup used to have default passwords for intetrnal accounts used across components. In order to make the default setup secure by default these have been removed and the respective containers won't start without having a password set.

Strong passwordds may be generated as follows: ./gen-passwords.sh This will modify your .env file (a backup is saved in .env.backup) and set strong passwords for each of the require options. Passwords are generated using openssl rand -hex 16 .

DO NOT reuse any of the passwords.

Architecture

A Jitsi Meet installation can be broken down into the following components:

A web interface
An XMPP server
A conference focus component
A video router (could be more than one)
A SIP gateway for audio calls
A Broadcasting Infrastructure for recording or streaming a conference.

The diagram shows a typical deployment in a host running Docker. This project separates each of the components above into interlinked containers. To this end, several container images are provided.

External Ports

The following external ports must be opened on a firewall:

80/tcp for Web UI HTTP (really just to redirect, after uncommenting ENABLE_HTTP_REDIRECT=1 in .env)
443/tcp for Web UI HTTPS
4443/tcp for RTP media over TCP
10000/udp for RTP media over UDP

Also 20000-20050/udp for jigasi, in case you choose to deploy that to facilitate SIP access.

E.g. on a CentOS/Fedora server this would be done like this (without SIP access):

    $ sudo firewall-cmd --permanent --add-port=80/tcp
    $ sudo firewall-cmd --permanent --add-port=443/tcp
    $ sudo firewall-cmd --permanent --add-port=4443/tcp
    $ sudo firewall-cmd --permanent --add-port=10000/udp
    $ sudo firewall-cmd --reload

Images

base: Debian stable base image with the S6 Overlay for process control and the Jitsi repositories enabled. All other images are based on this one.
base-java: Same as the above, plus Java (OpenJDK).
web: Jitsi Meet web UI, served with nginx.
prosody: Prosody, the XMPP server.
jicofo: Jicofo, the XMPP focus component.
jvb: Jitsi Videobridge, the video router.
jigasi: Jigasi, the SIP (audio only) gateway.
etherpad: Etherpad, shared document editing addon.
jibri: Jibri, the broadcasting infrastructure.

Design considerations

Jitsi Meet uses XMPP for signaling, thus the need for the XMPP server. The setup provided by these containers does not expose the XMPP server to the outside world. Instead, it's kept completely sealed, and routing of XMPP traffic only happens on a user-defined network.

The XMPP server can be exposed to the outside world, but that's out of the scope of this project.

Configuration

The configuration is performed via environment variables contained in a .env file. You can copy the provided env.example file as a reference.

IMPORTANT: At the moment, the configuration is not regenerated on every container boot, so if you make any changes to your .env file, make sure you remove the configuration directory before starting your containers again.

Variable	Description	Example
`CONFIG`	Directory where all configuration will be stored	/opt/jitsi-meet-cfg
`TZ`	System Time Zone	Europe/Amsterdam
`HTTP_PORT`	Exposed port for HTTP traffic	8000
`HTTPS_PORT`	Exposed port for HTTPS traffic	8443
`DOCKER_HOST_ADDRESS`	IP address of the Docker host, needed for LAN environments	192.168.1.1
`PUBLIC_URL`	Public URL for the web service	https://meet.example.com

NOTE: The mobile apps won't work with self-signed certificates (the default) see below for instructions on how to obtain a proper certificate with Let's Encrypt.

Let's Encrypt configuration

If you plan on exposing this container setup to the outside traffic directly and want a proper TLS certificate, you are in luck because Let's Encrypt support is built right in. Here are the required options:

Variable	Description	Example
`ENABLE_LETSENCRYPT`	Enable Let's Encrypt certificate generation	1
`LETSENCRYPT_DOMAIN`	Domain for which to generate the certificate	meet.example.com
`LETSENCRYPT_EMAIL`	E-Mail for receiving important account notifications (mandatory)	[email protected]

In addition, you will need to set HTTP_PORT to 80 and HTTPS_PORT to 443.

SIP gateway configuration

If you want to enable the SIP gateway, these options are required:

Variable	Description	Example
`JIGASI_SIP_URI`	SIP URI for incoming / outgoing calls	[email protected]
`JIGASI_SIP_PASSWORD`	Password for the specified SIP account	passw0rd
`JIGASI_SIP_SERVER`	SIP server (use the SIP account domain if in doubt)	sip2sip.info
`JIGASI_SIP_PORT`	SIP server port	5060
`JIGASI_SIP_TRANSPORT`	SIP transport	UDP

JItsi BRoadcasting Infrastructure configuration

Before running Jibri, you need to set up an ALSA loopback device on the host. This will not work on a non-Linux host.

For CentOS 7, the module is already compiled with the kernel, so just run:

# configure 5 capture/playback interfaces
echo "options snd-aloop enable=1,1,1,1,1 index=0,1,2,3,4" > /etc/modprobe.d/alsa-loopback.conf
# setup autoload the module
echo "snd_aloop" > /etc/modules-load.d/snd_aloop.conf
# load the module
modprobe snd-aloop
# check that the module is loaded
lsmod | grep snd_aloop

For Ubuntu:

# install the module
apt update && apt install linux-image-extra-virtual
# configure 5 capture/playback interfaces
echo "options snd-aloop enable=1,1,1,1,1 index=0,1,2,3,4" > /etc/modprobe.d/alsa-loopback.conf
# setup autoload the module
echo "snd-aloop" >> /etc/modules
# check that the module is loaded
lsmod | grep snd_aloop

NOTE: if you are running on AWS you may need to reboot your machine to use the generic kernel instead of the "aws" kernel.

If you want to enable Jibri these options are required:

Variable	Description	Example
`ENABLE_RECORDING`	Enable recording conference to local disk	1

Extended Jibri configuration:

Variable	Description	Example
`JIBRI_RECORDER_USER`	Internal recorder user for Jibri client connections	recorder
`JIBRI_RECORDER_PASSWORD`	Internal recorder password for Jibri client connections	passw0rd
`JIBRI_RECORDING_DIR`	Directory for recordings inside Jibri container	/config/recordings
`JIBRI_FINALIZE_RECORDING_SCRIPT_PATH`	The finalizing script. Will run after recording is complete	/config/finalize.sh
`JIBRI_XMPP_USER`	Internal user for Jibri client connections.	jibri
`JIBRI_RECORDER_PASSWORD`	Internal user for Jibri client connections	passw0rd
`JIBRI_STRIP_DOMAIN_JID`	Prefix domain for strip inside Jibri (please see env.example for details)	muc
`JIBRI_BREWERY_MUC`	MUC name for the Jibri pool	jibribrewery
`JIBRI_PENDING_TIMEOUT`	MUC connection timeout	90
`JIBRI_LOGS_DIR`	Directory for logs inside Jibri container	/config/logs

For using multiple Jibri instances, you have to select different loopback interfaces for each instance manually.

Set interface in file `/home/jibri/.asoundrc` inside a docker container.

Default the first instance has:

...
slave.pcm "hw:Loopback,0,0"
...
slave.pcm "hw:Loopback,0,1"
...
slave.pcm "hw:Loopback,1,1"
...
slave.pcm "hw:Loopback,1,0"
...

For setup the second instance, run container with changed /home/jibri/.asoundrc:

...
slave.pcm "hw:Loopback_1,0,0"
...
slave.pcm "hw:Loopback_1,0,1"
...
slave.pcm "hw:Loopback_1,1,1"
...
slave.pcm "hw:Loopback_1,1,0"
...

Also you can use numbering id for set loopback interface. The third instance will have .asoundrc that looks like:

...
slave.pcm "hw:2,0,0"
...
slave.pcm "hw:2,0,1"
...
slave.pcm "hw:2,1,1"
...
slave.pcm "hw:2,1,0"
...

Authentication

Authentication can be controlled with the environment variables below. If guest access is enabled, unauthenticated users will need to wait until a user authenticates before they can join a room. If guest access is not enabled, every user will need to authenticate before they can join.

Variable	Description	Example
`ENABLE_AUTH`	Enable authentication	1
`ENABLE_GUESTS`	Enable guest access	1
`AUTH_TYPE`	Select authentication type (internal, jwt or ldap)	internal

Internal authentication

The default authentication mode (internal) uses XMPP credentials to authenticate users. To enable it you have to enable authentication with ENABLE_AUTH and set AUTH_TYPE to internal, then configure the settings you can see below.

Internal users must be created with the prosodyctl utility in the prosody container. In order to do that, first, execute a shell in the corresponding container:

docker-compose exec prosody /bin/bash

Once in the container, run the following command to create a user:

prosodyctl --config /config/prosody.cfg.lua register TheDesiredUsername meet.jitsi TheDesiredPassword

Note that the command produces no output.

Authentication using LDAP

You can use LDAP to authenticate users. To enable it you have to enable authentication with ENABLE_AUTH and set AUTH_TYPE to ldap, then configure the settings you can see below.

Variable	Description	Example
`LDAP_URL`	URL for ldap connection	ldaps://ldap.domain.com/
`LDAP_BASE`	LDAP base DN. Can be empty.	DC=example,DC=domain,DC=com
`LDAP_BINDDN`	LDAP user DN. Do not specify this parameter for the anonymous bind.	CN=binduser,OU=users,DC=example,DC=domain,DC=com
`LDAP_BINDPW`	LDAP user password. Do not specify this parameter for the anonymous bind.	LdapUserPassw0rd
`LDAP_FILTER`	LDAP filter.	(sAMAccountName=%u)
`LDAP_AUTH_METHOD`	LDAP authentication method.	bind
`LDAP_VERSION`	LDAP protocol version	3
`LDAP_USE_TLS`	Enable LDAP TLS	1
`LDAP_TLS_CIPHERS`	Set TLS ciphers list to allow	SECURE256:SECURE128
`LDAP_TLS_CHECK_PEER`	Require and verify LDAP server certificate	1
`LDAP_TLS_CACERT_FILE`	Path to CA cert file. Used when server certificate verification is enabled	/etc/ssl/certs/ca-certificates.crt
`LDAP_TLS_CACERT_DIR`	Path to CA certs directory. Used when server certificate verification is enabled.	/etc/ssl/certs
`LDAP_START_TLS`	Enable START_TLS, requires LDAPv3, URL must be ldap:// not ldaps://	0

Authentication using JWT tokens

You can use JWT tokens to authenticate users. To enable it you have to enable authentication with ENABLE_AUTH and set AUTH_TYPE to jwt, then configure the settings you can see below.

Variable	Description	Example
`JWT_APP_ID`	Application identifier	my_jitsi_app_id
`JWT_APP_SECRET`	Application secret known only to your token	my_jitsi_app_secret
`JWT_ACCEPTED_ISSUERS`	(Optional) Set asap_accepted_issuers as a comma separated list	my_web_client,my_app_client
`JWT_ACCEPTED_AUDIENCES`	(Optional) Set asap_accepted_audiences as a comma separated list	my_server1,my_server2
`JWT_ASAP_KEYSERVER`	(Optional) Set asap_keyserver to a url where public keys can be found	https://example.com/asap
`JWT_ALLOW_EMPTY`	(Optional) Allow anonymous users with no JWT while validating JWTs when provided	0
`JWT_AUTH_TYPE`	(Optional) Controls which module is used for processing incoming JWTs	token
`JWT_TOKEN_AUTH_MODULE`	(Optional) Controls which module is used for validating JWTs	token_verification

This can be tested using the jwt.io debugger. Use the following sample payload:

{
  "context": {
    "user": {
      "avatar": "https://robohash.org/john-doe",
      "name": "John Doe",
      "email": "[email protected]"
    }
  },
  "aud": "my_jitsi_app_id",
  "iss": "my_jitsi_app_id",
  "sub": "meet.jitsi",
  "room": "*"
}

Shared document editing using Etherpad

You can collaboratively edit a document via Etherpad. In order to enable it, set the config options below and run Docker Compose with the additional config file etherpad.yml.

Here are the required options:

Variable	Description	Example
`ETHERPAD_URL_BASE`	Set etherpad-lite URL	http://etherpad.meet.jitsi:9001

Transcription configuration

If you want to enable the Transcribing function, these options are required:

Variable	Description	Example
`ENABLE_TRANSCRIPTIONS`	Enable Jigasi transcription in a conference	1
`GC_PROJECT_ID`	`project_id` from Google Cloud Credentials
`GC_PRIVATE_KEY_ID`	`private_key_id` from Google Cloud Credentials
`GC_PRIVATE_KEY`	`private_key` from Google Cloud Credentials
`GC_CLIENT_EMAIL`	`client_email` from Google Cloud Credentials
`GC_CLIENT_ID`	`client_id` from Google Cloud Credentials
`GC_CLIENT_CERT_URL`	`client_x509_cert_url` from Google Cloud Credentials

For setting the Google Cloud Credentials please read https://cloud.google.com/text-to-speech/docs/quickstart-protocol section "Before you begin" paragraph 1 to 5.

Advanced configuration

These configuration options are already set and generally don't need to be changed.

Variable	Description	Default value
`XMPP_DOMAIN`	Internal XMPP domain	meet.jitsi
`XMPP_AUTH_DOMAIN`	Internal XMPP domain for authenticated services	auth.meet.jitsi
`XMPP_SERVER`	Internal XMPP server name xmpp.meet.jitsi	xmpp.meet.jitsi
`XMPP_BOSH_URL_BASE`	Internal XMPP server URL for BOSH module	http://xmpp.meet.jitsi:5280
`XMPP_MUC_DOMAIN`	XMPP domain for the MUC	muc.meet.jitsi
`XMPP_INTERNAL_MUC_DOMAIN`	XMPP domain for the internal MUC	internal-muc.meet.jitsi
`XMPP_GUEST_DOMAIN`	XMPP domain for unauthenticated users	guest.meet.jitsi
`XMPP_RECORDER_DOMAIN`	Domain for the jibri recorder	recorder.meet.jitsi
`XMPP_MODULES`	Custom Prosody modules for XMPP_DOMAIN (comma separated)	info,alert
`XMPP_MUC_MODULES`	Custom Prosody modules for MUC component (comma separated)	info,alert
`XMPP_INTERNAL_MUC_MODULES`	Custom Prosody modules for internal MUC component (comma separated)	info,alert
`GLOBAL_MODULES`	Custom prosody modules to load in global configuration (comma separated)	statistics,alert
`GLOBAL_CONFIG`	Custom configuration string with escaped newlines	foo = bar;\nkey = val;
`JICOFO_COMPONENT_SECRET`	XMPP component password for Jicofo	s3cr37
`JICOFO_AUTH_USER`	XMPP user for Jicofo client connections	focus
`JICOFO_AUTH_PASSWORD`	XMPP password for Jicofo client connections	passw0rd
`JVB_AUTH_USER`	XMPP user for JVB MUC client connections	jvb
`JVB_AUTH_PASSWORD`	XMPP password for JVB MUC client connections	passw0rd
`JVB_STUN_SERVERS`	STUN servers used to discover the server's public IP	stun.l.google.com:19302, stun1.l.google.com:19302, stun2.l.google.com:19302
`JVB_PORT`	UDP port for media used by Jitsi Videobridge	10000
`JVB_TCP_HARVESTER_DISABLED`	Disable the additional harvester which allows video over TCP (rather than just UDP)	true
`JVB_TCP_PORT`	TCP port for media used by Jitsi Videobridge when the TCP Harvester is enabled	4443
`JVB_BREWERY_MUC`	MUC name for the JVB pool	jvbbrewery
`JVB_ENABLE_APIS`	Comma separated list of JVB APIs to enable	none
`JIGASI_XMPP_USER`	XMPP user for Jigasi MUC client connections	jigasi
`JIGASI_XMPP_PASSWORD`	XMPP password for Jigasi MUC client connections	passw0rd
`JIGASI_BREWERY_MUC`	MUC name for the Jigasi pool	jigasibrewery
`JIGASI_PORT_MIN`	Minimum port for media used by Jigasi	20000
`JIGASI_PORT_MAX`	Maximum port for media used by Jigasi	20050
`JIGASI_ENABLE_SDES_SRTP`	Enable SDES srtp	1
`JIGASI_SIP_KEEP_ALIVE_METHOD`	Keepalive method	OPTIONS
`JIGASI_HEALTH_CHECK_SIP_URI`	Health-check extension. Jigasi will call it for health check	keepalive
`JIGASI_HEALTH_CHECK_INTERVAL`	Interval of health check in milliseconds	300000
`JIGASI_TRANSCRIBER_RECORD_AUDIO`	Jigasi will record audio when transcriber is on	true
`JIGASI_TRANSCRIBER_SEND_TXT`	Jigasi will send a transcribed text to the chat when transcriber is on	true
`JIGASI_TRANSCRIBER_ADVERTISE_URL`	Jigasi will post an URL to the chat with transcription file	true
`DISABLE_HTTPS`	Handle TLS connections outside of this setup	1
`ENABLE_HTTP_REDIRECT`	Redirect HTTP traffic to HTTPS (necessary for Let's Encrypt)	1
`LOG_LEVEL`	Controls which logs are output from prosody and associated modules	info

Running behind NAT or on a LAN environment

If running in a LAN environment (as well as on the public Internet, via NAT) is a requirement, the DOCKER_HOST_ADDRESS should be set. This way, the Videobridge will advertise the IP address of the host running Docker instead of the internal IP address that Docker assigned it, thus making ICE succeed. If your users are coming in over the Internet (and not over LAN), this will likely be your public IP address. If this is not set up correctly, calls will crash when more than two users join a meeting.

The public IP address is discovered via STUN. STUN servers can be specified with the JVB_STUN_SERVERS option.

Build Instructions

Building your images allows you to edit the configuration files of each image individually, providing more customization for your deployment.

The docker images can be built by running the make command in the main repository folder. If you need to overwrite existing images from the remote source, use FORCE_REBUILD=1 make.

If you are on the unstable branch, build the images with FORCE_REBUILD=1 JITSI_RELEASE=unstable make.

You are now able to run docker-compose up as usual.

TODO

Support container replicas (where applicable).
TURN server.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Jitsi Meet on Docker

Table of contents

Quick start

Security note

Architecture

External Ports

Images

Design considerations

Configuration

Let's Encrypt configuration

SIP gateway configuration

JItsi BRoadcasting Infrastructure configuration

Authentication

Internal authentication

Authentication using LDAP

Authentication using JWT tokens

Shared document editing using Etherpad

Transcription configuration

Advanced configuration

Running behind NAT or on a LAN environment

Build Instructions

TODO

About

Releases

Packages

Languages

Name		Name	Last commit message	Last commit date
Latest commit History 206 Commits
base-java		base-java
base		base
etherpad		etherpad
examples		examples
jibri		jibri
jicofo		jicofo
jigasi		jigasi
jvb		jvb
prosody		prosody
resources		resources
web		web
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
docker-compose.yml		docker-compose.yml
env.example		env.example
etherpad.yml		etherpad.yml
gen-passwords.sh		gen-passwords.sh
jibri.yml		jibri.yml
jigasi.yml		jigasi.yml

License

Midyr2/docker-jitsi-meet

Folders and files

Latest commit

History

Repository files navigation

Jitsi Meet on Docker

Table of contents

Quick start

Security note

Architecture

External Ports

Images

Design considerations

Configuration

Let's Encrypt configuration

SIP gateway configuration

JItsi BRoadcasting Infrastructure configuration

Authentication

Internal authentication

Authentication using LDAP

Authentication using JWT tokens

Shared document editing using Etherpad

Transcription configuration

Advanced configuration

Running behind NAT or on a LAN environment

Build Instructions

TODO

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages