Beta v8.24.1

.build/images/Quartz64/quartz64_defconfig

@@ -247,6 +247,7 @@ CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
 CONFIG_HID_MULTITOUCH=y
 CONFIG_HID_REDRAGON=m
+CONFIG_HIDRAW=y
 CONFIG_HIGH_RES_TIMERS=y
 # CONFIG_HISILICON_ERRATUM_161010101 is not set
 CONFIG_HOTPLUG_PCI=y
@@ -1011,6 +1012,7 @@ CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GSPCA=m
+CONFIG_USB_HIDDEV=y
 CONFIG_USB_LAN78XX=m
 CONFIG_USB_LEDS_TRIGGER_USBPORT=y
 CONFIG_USB_LED_TRIG=y

.build/images/U-Boot/boot.cmd

@@ -20,8 +20,8 @@ setenv fdt_addr_r "0x4080000"
 setenv overlay_error "false"
 
 # Load environment file
-if load ${devtype} ${devnum} ${scriptaddr} ${prefix}dietpiEnv.txt; then
-	env import -t ${scriptaddr} ${filesize}
+if load "${devtype}" "${devnum}" "${scriptaddr}" "${prefix}dietpiEnv.txt"; then
+	env import -t "${scriptaddr}" "${filesize}"
 fi
 
 # Define kernel command-line arguments
@@ -31,44 +31,44 @@ setenv bootargs "root=${rootdev} rootfstype=${rootfstype} rootwait ${consoleargs
 if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=memory swapaccount=1"; fi
 
 # Load kernel, initramfs and device tree
-load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}Image
-load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
-load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
-fdt addr ${fdt_addr_r}
+load "${devtype}" "${devnum}" "${kernel_addr_r}" "${prefix}Image"
+load "${devtype}" "${devnum}" "${ramdisk_addr_r}" "${prefix}uInitrd"
+load "${devtype}" "${devnum}" "${fdt_addr_r}" "${prefix}dtb/${fdtfile}"
+fdt addr "${fdt_addr_r}"
 
 # Apply DT overlays
 if test -n "${overlays}${user_overlays}"; then
 	fdt resize 65536
 	for overlay in ${overlays}; do
-		if load ${devtype} ${devnum} ${scriptaddr} ${prefix}dtb/${overlay_path}/overlay/${overlay_prefix}-${overlay}.dtbo; then
+		if load "${devtype}" "${devnum}" "${scriptaddr}" "${prefix}dtb/${overlay_path}/overlay/${overlay_prefix}-${overlay}.dtbo"; then
 			echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay}.dtbo"
-			fdt apply ${scriptaddr} || setenv overlay_error "true"
+			fdt apply "${scriptaddr}" || setenv overlay_error "true"
 		fi
 	done
 
 	for overlay in ${user_overlays}; do
-		if load ${devtype} ${devnum} ${scriptaddr} ${prefix}overlay-user/${overlay}.dtbo; then
+		if load "${devtype}" "${devnum}" "${scriptaddr}" "${prefix}overlay-user/${overlay}.dtbo"; then
 			echo "Applying user provided DT overlay ${overlay}.dtbo"
-			fdt apply ${scriptaddr} || setenv overlay_error "true"
+			fdt apply "${scriptaddr}" || setenv overlay_error "true"
 		fi
 	done
 
 	if test "${overlay_error}" = "true"; then
 		echo "Error applying DT overlays, restoring original DT"
-		load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
+		load "${devtype}" "${devnum}" "${fdt_addr_r}" "${prefix}dtb/${fdtfile}"
 	else
-		if load ${devtype} ${devnum} ${scriptaddr} ${prefix}dtb/${overlay_path}/overlay/${overlay_prefix}-fixup.scr; then
+		if load "${devtype}" "${devnum}" "${scriptaddr}" "${prefix}dtb/${overlay_path}/overlay/${overlay_prefix}-fixup.scr"; then
 			echo "Applying kernel provided DT fixup script ${overlay_prefix}-fixup.scr"
-			source ${scriptaddr}
+			source "${scriptaddr}"
 		fi
-		if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
-			if load ${devtype} ${devnum} ${scriptaddr} ${prefix}fixup.scr; then
+		if test -e "${devtype}" "${devnum}" "${prefix}fixup.scr"; then
+			if load "${devtype}" "${devnum}" "${scriptaddr}" "${prefix}fixup.scr"; then
 				echo "Applying user provided DT fixup script fixup.scr"
-				source ${scriptaddr}
+				source "${scriptaddr}"
 			fi
 		fi
 	fi
 fi
 
 # Boot
-booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
+booti "${kernel_addr_r}" "${ramdisk_addr_r}" "${fdt_addr_r}"

.build/images/dietpi-imager

@@ -573,15 +573,15 @@ _EOF_
 			# Rename if source image != output image yet
 			[[ $(readlink -f "$PWD/$OUTPUT_IMG_NAME.$OUTPUT_IMG_EXT") != "$(readlink -f "$FP_SOURCE_IMG")" ]] && G_EXEC mv "$FP_SOURCE_IMG" "$OUTPUT_IMG_NAME.$OUTPUT_IMG_EXT"
 
-			# Check for sufficient free disk space to store the 7z archive with 100 MiB buffer
+			# Check for sufficient free disk space to store the xz archive with 100 MiB buffer
 			(( $SKIP_ARCHIVE )) || G_CHECK_FREESPACE . $(( $IMAGE_SIZE * 15/100 / 1024**2 + 100 )) || exit 1
 
 		# Drive source and dd target
 		elif [[ $CLONING_TOOL == 'dd' ]]
 		then
-			# Check for sufficient free disk space to store the image and in case the 7z archive with 100 MiB buffer
+			# Check for sufficient free disk space to store the image and in case the xz archive with 100 MiB buffer
 			local free_space_percent=100
-			(( $SKIP_ARCHIVE )) || free_space_percent=115 # 15% image size for 7z archive
+			(( $SKIP_ARCHIVE )) || free_space_percent=115 # 15% image size for xz archive
 			G_CHECK_FREESPACE . $(( $IMAGE_SIZE * $free_space_percent/100 / 1024**2 + 100 )) || exit 1
 
 			G_DIETPI-NOTIFY 2 "Creating final image with actually used size: $(( $IMAGE_SIZE / 1024**2 + 1 )) MiB"

.build/images/dietpi-installer

@@ -572,6 +572,9 @@ _EOF_
 			# Boot in 64-bit mode if this is a 64-bit image
 			[[ $G_HW_ARCH == 3 ]] && G_CONFIG_INJECT 'arm_64bit=' 'arm_64bit=1' /boot/config.txt
 
+			# Temporary workaround for conflicting rpi-eeprom package
+			(( $DISTRO_TARGET > 6 )) && ! grep -q 'https://dietpi.com/downloads/binaries/rpi/rpi-eeprom.deb' "DietPi-$G_GITBRANCH/dietpi/func/dietpi-set_hardware" && G_EXEC sed -i 's|G_AG_CHECK_INSTALL_PREREQ rpi-eeprom|G_EXEC_OUTPUT=1 G_EXEC curl -fO https://dietpi.com/downloads/binaries/rpi/rpi-eeprom.deb; G_AGI ./rpi-eeprom.deb; G_EXEC rm rpi-eeprom.deb; G_EXEC apt-mark hold rpi-eeprom|' "DietPi-$G_GITBRANCH/dietpi/func/dietpi-set_hardware"
+
 		elif [[ $G_HW_MODEL =~ ^(10|11)$ ]]
 		then
 			armbian_repo=1
@@ -902,12 +905,12 @@ _EOF_
 			)
 
 			# Skip entropy daemon on all devices but those with old kernel
-			if [[ ! $G_HW_MODEL =~ ^(11|61|62|70)$ ]] # Odroid XU4, NanoPi M2/T2/Fire2, NanoPi M3/T3/Fire3, Sparky SBC
+			if [[ ! $G_HW_MODEL =~ ^(61|62|70)$ ]] # NanoPi M2/T2/Fire2, NanoPi M3/T3/Fire3, Sparky SBC
 			then
 				:
 
 			# Entropy daemon: Use modern rng-tools5 on all devices where it has been proven to work, else haveged: https://github.com/MichaIng/DietPi/issues/2806
-			elif [[ $G_HW_MODEL -lt 10 || $G_HW_MODEL =~ ^(14|15|16|24|29|42|46|58|68|72|74|76|78|79|80|81|82|85|86)$ ]] # RPi, S922X, Odroid C4, RK3399 - 47 NanoPi R4S, Radxa Zero, NanoPi R5S/R5C, ROCK 5B, NanoPi 6, Orange Pi 5, VisionFive 2, Orange Pi 5 Plus
+			elif [[ $G_HW_MODEL -lt 10 || $G_HW_MODEL =~ ^(14|15|16|24|29|42|46|58|68|72|74|76|78|79|80|81|82|83|84|85|86)$ ]] # RPi, S922X, Odroid C4, RK3399 - 47 NanoPi R4S, Radxa Zero, NanoPi R5S/R5C, ROCK 5B, NanoPi 6, Orange Pi 5, VisionFive 2, Orange Pi 5 Plus
 			then
 				aPACKAGES_REQUIRED_INSTALL+=('rng-tools5')
 			else
@@ -1248,6 +1251,20 @@ _EOF_
 			G_EXEC sed -i "s/rootfstype=[^[:blank:]]*/rootfstype=$(findmnt -Ufnro FSTYPE -M /)/" /boot/extlinux/extlinux.conf
 			aPACKAGES_REQUIRED_INSTALL+=('libubootenv-tool')
 
+		# Star64
+		elif (( $G_HW_MODEL == 84 ))
+		then
+			G_EXEC curl -sSfo package.deb 'https://dietpi.com/downloads/binaries/linux-image-star64.deb'
+			dpkg-deb -I linux-image-star64.deb conffiles | while read -r line
+			do
+				[[ -f $line ]] && G_EXEC rm "$line"
+			done
+			G_EXEC_OUTPUT=1 G_EXEC dpkg -i package.deb
+			G_EXEC rm package.deb
+			G_EXEC sed -i "s/root=[^[:blank:]]*/root=PARTUUID=$(findmnt -Ufnro PARTUUID -M /)/" /boot/extlinux/extlinux.conf
+			G_EXEC sed -i "s/rootfstype=[^[:blank:]]*/rootfstype=$(findmnt -Ufnro FSTYPE -M /)/" /boot/extlinux/extlinux.conf
+			aPACKAGES_REQUIRED_INSTALL+=('libubootenv-tool')
+
 		# Orange Pi Zero 3
 		elif (( $G_HW_MODEL == 83 ))
 		then
@@ -1269,6 +1286,21 @@ _EOF_
 			# shellcheck disable=SC2154
 			write_uboot_platform "$DIR" "$BOOT_DEVICE"
 
+			# Apply device tree adjustment for Ethernet adapter
+			# shellcheck disable=SC2016
+			sed -i -e '/^setenv bootargs /s/"$/ ethernet_phy=${ethernet_phy}"/' -e '/^# Boot/i\
+if test "${ethernet_phy}" = "rtl8211f"; then\
+	echo "Ethernet adapter: ${ethernet_phy}, adjusting device tree ..."\
+	fdt set "/soc/ethernet@5020000" "allwinner,rx-delay-ps" "<3100>"\
+	fdt set "/soc/ethernet@5020000" "allwinner,tx-delay-ps" "<700>"\
+elif test "${ethernet_phy}" = "yt8531c"; then\
+	echo "Ethernet adapter: ${ethernet_phy}, adjusting device tree ..."\
+	fdt set "/soc/ethernet@5020000" "allwinner,rx-delay-ps" "<0>"\
+	fdt set "/soc/ethernet@5020000" "allwinner,tx-delay-ps" "<600>"\
+else\
+	echo "Ethernet adapter: \\"${ethernet_phy}\\""\
+fi\
+' /boot/boot.cmd
 			# Compile U-Boot script
 			G_EXEC mkimage -C none -A arm64 -T script -d /boot/boot.cmd /boot/boot.scr
 
@@ -1525,6 +1557,7 @@ _EOF_
 		getent passwd fa > /dev/null && userdel -f fa # OMV (NanoPi NEO2)
 		getent passwd colord > /dev/null && userdel -f colord # OMV (NanoPi NEO2)
 		getent passwd saned > /dev/null && userdel -f saned # OMV (NanoPi NEO2)
+		getent passwd orangepi > /dev/null && userdel -f saned # Orange Pi images
 		getent group openmediavault-config > /dev/null && groupdel openmediavault-config # OMV (NanoPi NEO2)
 		getent group openmediavault-engined > /dev/null && groupdel openmediavault-engined # OMV (NanoPi NEO2)
 		getent group openmediavault-webgui > /dev/null && groupdel openmediavault-webgui # OMV (NanoPi NEO2)
@@ -1538,7 +1571,7 @@ _EOF_
 		G_DIETPI-NOTIFY 2 'Removing misc files/folders/services, not required by DietPi'
 
 		[[ -f '/boot/boot.bmp' ]] && G_EXEC rm /boot/boot.bmp
-		[[ -f '/boot/logo.bmp' ]] && G_EXEC rm /boot/logo.bmp
+		[[ -f '/boot/logo.bmp' ]] && G_EXEC rm /boot/logo.bmp # Orange Pi images
 		[[ -d '/selinux' ]] && G_EXEC rm -R /selinux
 		[[ -d '/var/cache/apparmor' ]] && G_EXEC rm -R /var/cache/apparmor
 		[[ -d '/var/lib/udisks2' ]] && G_EXEC rm -R /var/lib/udisks2
@@ -1675,6 +1708,7 @@ _EOF_
 		[[ -f '/etc/init.d/resize2fs_once' ]] && G_EXEC rm /etc/init.d/resize2fs_once # https://github.com/RPi-Distro/pi-gen/blob/master/stage2/01-sys-tweaks/files/resize2fs_once
 		# - Remove all autologin configs for all TTYs: https://github.com/MichaIng/DietPi/issues/3570#issuecomment-648988475, https://github.com/MichaIng/DietPi/issues/3628#issuecomment-653693758
 		G_EXEC rm -f /etc/systemd/system/*getty@*.service.d/*autologin*.conf
+		G_EXEC rm -f /lib/systemd/system/*getty@*.service.d/override.conf # Orange Pi images
 
 		# - make_nas_processes_faster cron job on ROCK64 + NanoPi + PINE A64(?) images
 		[[ -f '/etc/cron.d/make_nas_processes_faster' ]] && G_EXEC rm /etc/cron.d/make_nas_processes_faster

.conf/dps_114/lighttpd.nextcloud.conf

@@ -31,4 +31,14 @@ $HTTP["url"] =~ "^/nextcloud($|/)" {
 		)
 	}
 
+	# Rewrites
+	url.rewrite-once += (
+		"^/nextcloud/remote/(.*)" => "/nextcloud/remote.php/$1",
+		"^/nextcloud/ocm-provider($|/\?.*)" => "/nextcloud/index.php$1"
+	)
+	url.rewrite-if-not-file += (
+		"^/nextcloud/((core/ajax/update|cron|public|remote|status|ocs/v[12])\.php|ocs-provider/|updater/)" => "",
+		"^/nextcloud(.*)" => "/nextcloud/index.php$1"
+	)
+
 }

.github/workflows/armbian.yml

@@ -0,0 +1,71 @@
+name: Armbian
+on:
+  workflow_dispatch:
+    inputs:
+      asset:
+        description: 'Asset'
+        type: choice
+        options: [kernel, uboot, firmware]
+        default: kernel
+        required: true
+      branch:
+        description: 'Branch'
+        type: choice
+        options: [legacy, current, edge]
+        default: current
+        required: true
+      board:
+        description: 'Board'
+        required: true
+      gitowner:
+        description: 'Override Git owner of Armbian repo'
+      gitbranch:
+        description: 'Override Git branch of Armbian repo'
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.inputs.asset }}-${{ github.event.inputs.branch }}-${{ github.event.inputs.board }}
+  cancel-in-progress: true
+permissions: {}
+defaults:
+  run:
+    shell: sh
+jobs:
+  build:
+    name: "${{ github.event.inputs.asset }} - ${{ github.event.inputs.branch }} - ${{ github.event.inputs.board }}"
+    runs-on: ubuntu-22.04
+    steps:
+    - name: Clone Armbian repo
+      run: |
+        owner='${{ github.event.inputs.gitowner }}'
+        [ "$owner" ] || owner='armbian'
+        branch='${{ github.event.inputs.gitbranch }}'
+        [ "$branch" ] || branch='main'
+        git clone -b "$branch" --depth=1 "https://github.com/$owner/build"
+    - name: Build asset
+      run: |
+        cd build
+        ./compile.sh '${{ github.event.inputs.asset }}' BRANCH='${{ github.event.inputs.branch }}' BOARD='${{ github.event.inputs.board }}'
+    - name: Upload
+      run: |
+        # SSH server and client keys
+        mkdir ~/.ssh
+        umask 377
+        echo '${{ secrets.KNOWN_HOSTS }}' > ~/.ssh/known_hosts
+        echo '${{ secrets.SSH_KEY }}' > ~/.ssh/id_ed25519
+
+        # Generate file lists
+        files=
+        urls='"https://dietpi.com/downloads/binaries/testing/"'
+        cd build/output/debs
+        for i in *
+        do
+          mv -v "$i" "${i%%_*}.deb"
+          i="${i%%_*}.deb"
+          files="$files,$i"
+          urls="$urls,\"https://dietpi.com/downloads/binaries/testing/$i\""
+        done
+        files=${files#,}
+        echo "Uploading file(s) $files to URL(s) $urls ..."
+
+        # Upload
+        curl -T "{$files}" --key ~/.ssh/id_ed25519 '${{ secrets.UPLOAD_URL }}all/'
+        curl 'https://api.cloudflare.com/client/v4/zones/${{ secrets.CF_ZONE }}/purge_cache' -H 'Authorization: Bearer ${{ secrets.CF_TOKEN }}' -H 'Content-Type: application/json' --data "{\"files\":[$urls]}"

.meta/dietpi-bookworm-upgrade

@@ -66,6 +66,15 @@ G_DIETPI-NOTIFY 2 'Reverting some package lists to Bullseye which have no Bookwo
 [[ -f '/etc/apt/sources.list.d/influxdb.list' ]] && G_EXEC sed -i 's/bookworm/bullseye/' /etc/apt/sources.list.d/influxdb.list
 [[ -f '/etc/apt/sources.list.d/mopidy.list' ]] && G_EXEC sed -i 's/bookworm/bullseye/' /etc/apt/sources.list.d/mopidy.list
 
+if (( $G_HW_MODEL == 4 )) && dpkg-query -s rpi-eeprom &> /dev/null
+then
+	G_DIETPI-NOTIFY 2 'Setting rpi-eeprom package on hold to prevent conflicting upgrade attempt'
+	G_EXEC_OUTPUT=1 G_EXEC curl -fO 'https://dietpi.com/downloads/binaries/rpi/rpi-eeprom.deb'
+	G_EXEC dpkg -i --force-confdef,confold ./rpi-eeprom.deb
+	G_EXEC rm rpi-eeprom.deb
+	G_EXEC apt-mark hold rpi-eeprom
+fi
+
 G_DIETPI-NOTIFY 2 'Applying the actual upgrade to Debian Bookworm'
 /boot/dietpi/dietpi-services stop
 G_AGUP