Skip to content

MatousJobanek/toolchain-e2e

 
 

Repository files navigation

CodeReady Toolchain E2E Tests

Go Report Card GoDoc

This repo contains e2e tests for host and member operators of CodeReady Toolchain.

Build

Requires Go version 1.19.x (1.19.7 or higher) - download for your development environment here.

This repository uses Go modules.

Step by step guide - running in CodeReady Containers

Refer to this guide for detailed instructions on running the e2e tests in a local CodeReady Containers cluster.

End-to-End Tests

The e2e tests are executed against host and member operators running in OpenShift. The operators are built from the host-operator and member-operator repositories.

Since the changes in the e2e repo sometimes require changes in some of the operator repositories at the same time, the logic that executes the e2e tests supports a feature of pairing the e2e PR with one other PR based on branch names. Before the e2e tests are executed in openshift-ci, the logic automatically tries to pair a PR opened for this (toolchain-e2e) repository with a branch of the same name that potentially could exist in any of the developer’s fork of the operator repositories.

For example, if a developer with GH account cooljohn opens a PR (for toolchain-e2e repo) from a branch fix-reconcile, then the logic checks if there is a branch fix-reconcile also in the cooljohn/host-operator and cooljohn/member-operator forks. Let’s say that cooljohn/host-operator contains such a branch but cooljohn/member-operator doesn’t, then the logic:

  1. clones latest changes of both repos codeready-toolchain/host-operator and codeready-toolchain/member-operator

  2. fetches the fix-reconcile branch from cooljohn/host-operator fork

  3. merges master branch with the changes from fix-reconcile branch inside of host-operator repo

  4. builds images from the merge branch of host-operator repo and from master branch of member-operator repo & deploys them to OpenShift

  5. runs e2e tests taken from the opened PR

It would work analogically also for the case when none of the repositories contain the branch name. However, if both repositories contain the branch name then it will result in an error. This is by design because OLM does not ensure that both the host-operator and member-operator will be updated at the same time in production. Prohibiting PR pairing with more than one repo helps ensure they do not depend on one another and can be updated separately.

If you still don’t know what to do with e2e tests in some use-cases, go to What To Do section where all use-cases are covered.

Prerequisites if Running Locally

Install the required tools.

OpenShift 4.2+

Running in a Development Environment

See the procedure to install the Dev Sandbox in a development environment here.

Running End-to-End Tests

  1. Configure your quay account for dev deployment Although the e2e tests are in the separated repository than the actual operators are, it’s still possible to run them against the current code that is at HEAD of the operator repositories. There are multiple Makefile targets that will execute the e2e tests, they just differ in where the operators' code is taken from:

    • make test-e2e - this target clones the latest changes from both repos host-operator and member-operator, builds images from the master, deploys to OpenShift and runs e2e tests against them.

    • make test-e2e-local - this target doesn’t clone anything, but it builds operator images from the directories ../host-operator and ../member-operator. These images deploys to OpenShift and runs e2e tests against them.

    • make test-e2e-member-local - this target clones only the host-operator repo and builds an image from it. For member-operator, it builds the image from ../member-operator directory. These images deploys to OpenShift and runs e2e tests against them.

    • make test-e2e-host-local - this target clones only the member-operator repo and builds an image from it. For host-operator, it builds the image from ../host-operator directory. These images deploys to OpenShift and runs e2e tests against them.

The e2e tests will take care of creating all needed namespaces with random names (or see below for enforcing some specific namespace names). It will also create all required CRDs, role and role bindings for the service accounts, build the Docker images for both operators and push them to the OpenShift container registry. Finally, it will deploy the operators and run the tests using the operator-sdk.

Note
you can override the default namespace names where the end-to-end tests are going to be executed - eg.: make test-e2e HOST_NS=my-host MEMBER_NS=my-member file.

Running/Debugging e2e tests from your IDE

In order to run/debug tests from your IDE you’ll need to export some required env variables, those will be used by the test framework to interact with the operator namespaces and the other toolchain resources in you cluster. Following snippet of code should be TEMPORARILY added at the top of the test you want to run/debug from your IDE:

os.Setenv("MEMBER_NS","toolchain-member-18161051")
os.Setenv("MEMBER_NS_2","toolchain-member2-18161051")
os.Setenv("HOST_NS","toolchain-host-18161051")
os.Setenv("REGISTRATION_SERVICE_NS","toolchain-host-18161051")
os.Setenv("KUBECONFIG", "~/aws-cluster-test/my-devsandbox/auth/kubeconfig")

example of Test case code containing the debugging env variables:

package parallel

import (
	"context"
	"os"
	"testing"
)

func TestCreateSpaceRequest(t *testing.T) {
	os.Setenv("MEMBER_NS","toolchain-member-18161051")
	os.Setenv("MEMBER_NS_2","toolchain-member2-18161051")
	os.Setenv("HOST_NS","toolchain-host-18161051")
	os.Setenv("REGISTRATION_SERVICE_NS","toolchain-host-18161051")
	os.Setenv("KUBECONFIG", "~/aws-cluster-test/my-devsandbox/auth/kubeconfig")
	// some more code here ...

	t.Run("create space request", func(t *testing.T) {
        // test case impelementation here ...
....
Note
replace the values with the ones from your dev/test environment and REMEMBER TO REMOVE THE SNIPPET BEFORE COMMITTING THE CODE OR OPENING A PR IN GH :)
What To Do

If you are still confused by the different e2e/operator location, execution and branch pairing, see the following cases and needed steps:

  • Working locally:

    • Need to verify changes in e2e tests against the latest version of both operators:

      • run make test-e2e

    • You are working in both repos toolchain-e2e and member-operator, so you need to run e2e tests against your current code located in ../member-operator directory:

      • run make test-e2e-member-local

    • You are working in both repos toolchain-e2e and host-operator, so you need to run e2e tests against your current code located in ../host-operator directory:

      • run make test-e2e-host-local

    • You are working in all three repos toolchain-e2e, host-operator and member-operator, so you need to run e2e tests against your current code located in both directories ../host-operator and ../member-operator:

      • run make test-e2e-local

  • Creating PRs:

    • Your PR doesn’t need any changes in host-operator repo nor member-operator repo:

      • 1. check the name of a branch you are going to create a PR for

      • 2. make sure that your forks of both repos (host-operator and member-operator) don’t contain a branch with the same name

      • 3. create a PR

    • Your PR requires changes in host-operator repo but not in member-operator repo:

      • 1. check the name of a branch you are going to create a PR for

      • 2. create a branch with the same name within your fork of host-operator repo and put all necessary changes there

      • 3. make sure that your fork of member-operator repo doesn’t contain a branch with the same name

      • 4. push all changes into both forks of the repositories toolchain-e2e and host-operator

      • 5. create a PR for toolchain-e2e

      • 6. create a PR for host-operator

    • Your PR requires changes in member-operator repo but not in host-operator repo:

      • See the previous case and just swap member-operator and host-operator.

    • Your PR requires changes in both repos host-operator and member-operator:

      • This is prohibited and will result in an error like ERROR WHILE TRYING TO PAIR PRs in the CI build. See the reasoning behind this in the End-to-End Tests section.

Deploying End-to-End Resources Without Running Tests

All e2e resources (host operator, member operator, registration-service, CRDs, etc) can be deployed without running tests:

  • make dev-deploy-e2e-local - deploys the same resources as make test-e2e-local but doesn’t run tests.

  • make dev-deploy-e2e - deploys the same resources as make test-e2e but doesn’t run tests.

By default these targets deploy resources to toolchain-host-operator and toolchain-member-operator namespaces.

Note
If running in CodeReady Containers eval $(crc oc-env) is required.

How to Test Mailgun/Twilio Notifications in a Dev Environment

  • Get a cluster and setup the following env vars

    • export QUAY_NAMESPACE=<your-quay-namespace>

    • export KUBECONFIG=<location-to-kubeconfig>

  • Run docker login quay.io

  • Create IdP

  • If you need to change any of the default configuration, modify the ToolchainConfig in deploy/host-operator/dev/toolchainconfig.yaml

  • To set working notification/verification secrets, modify them in deploy/host-operator/dev/secrets.yaml

  • Run make dev-deploy-e2e-local

  • Go to the registration-service link and sign in

  • Click on the Get Started With CodeReady Toolchain button

  • Approve your usersignup found on the <username>-host-operator namespace

About

CodeReady Toolchain E2E Tests

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Go 77.9%
  • Makefile 17.5%
  • Shell 3.1%
  • Dockerfile 1.5%