Skip to content

Latest commit

 

History

History
45 lines (24 loc) · 1.11 KB

README.md

File metadata and controls

45 lines (24 loc) · 1.11 KB

#GPRSBee_LP_SMS

This code send SMS text with RTC temperature value using GPRSBee. Low power is implemented every SLPNG seconds.

#Configuration Send SMS every SLPNG seconds and go to sleep.

SMS is RTC temperature

Stalker + GPRSBee

To program unconnect pin0 and 1 or take gprsbee out. (sharing ports 0 and 1 from Stalker)

Jumper INT PD2 welded in Stalker to Use Interruption with RTC

Cable CTS and PWRPin from GPRSBee to Stalker In pins

GPRSBEE_PWRPIN (Stalker) <--> pin#9 (GPRSBee)

XBEECTS_PIN (Stalker) <--> pin#12 (GPRSBee)

Port0 (Stalker) <--> pin#1 (GPRSBee) Tx

Port1 (Stalker) <--> pin#2 (GPRSBee) Rx

BEE_PWRPIN 5 //if PD5-En jumper welded in Stalker to swtich on and off bee power

To read from serial Diag.h enable_diag in 1 and defined otherwise #undef

#define ENABLE_DIAG 1

UartSBee Gnd <--> Gnd Stalker

UartSBee Rx <--> DIAGPORT_TX Stalker

UartSBee TX <--> DIAGPORT_RX Stalker

##Libraries https://github.com/SodaqMoja/GPRSbee

##Hardware Stalker V2.3 http://www.seeedstudio.com/wiki/Seeeduino_Stalker_v2.3

GPRSBee http://www.gprsbee.com