Merge branch 'bugfix-2.1.x' of github.com:MarlinFirmware/Marlin into …

…leo_1S_S6_btt_mini

Marlin/Configuration_adv.h

@@ -1331,8 +1331,6 @@
   //#define CALIBRATION_SCRIPT_PRE  "M117 Starting Auto-Calibration\nT0\nG28\nG12\nM117 Calibrating..."
   //#define CALIBRATION_SCRIPT_POST "M500\nM117 Calibration data saved"
 
-  #define CALIBRATION_MEASUREMENT_RESOLUTION     0.01 // mm
-
   #define CALIBRATION_FEEDRATE_SLOW             60    // mm/min
   #define CALIBRATION_FEEDRATE_FAST           1200    // mm/min
   #define CALIBRATION_FEEDRATE_TRAVEL         3000    // mm/min

Marlin/Version.h

@@ -41,7 +41,7 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2024-06-17"
+//#define STRING_DISTRIBUTION_DATE "2024-07-02"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.

Marlin/src/HAL/AVR/HAL.h

@@ -159,7 +159,7 @@ typedef Servo hal_servo_t;
 #define GET_PIN_MAP_INDEX(pin) pin
 #define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
 
-#define HAL_SENSITIVE_PINS 0, 1,
+#define HAL_SENSITIVE_PINS 0, 1
 
 #ifdef __AVR_AT90USB1286__
   #define JTAG_DISABLE() do{ MCUCR = 0x80; MCUCR = 0x80; }while(0)

Marlin/src/HAL/AVR/endstop_interrupts.h

@@ -345,6 +345,14 @@ void setup_endstop_interrupts() {
       pciSetup(Z_MIN_PROBE_PIN);
     #endif
   #endif
+  #if USE_CALIBRATION
+    #if (digitalPinToInterrupt(CALIBRATION_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(CALIBRATION_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(CALIBRATION_PIN), "CALIBRATION_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      pciSetup(CALIBRATION_PIN);
+    #endif
+  #endif
 
   // If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
 }

Marlin/src/HAL/DUE/endstop_interrupts.h

@@ -64,6 +64,7 @@ void setup_endstop_interrupts() {
   TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
   TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
   TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
   TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
   TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
   TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));

Marlin/src/HAL/ESP32/endstop_interrupts.h

@@ -59,6 +59,7 @@ void setup_endstop_interrupts() {
   TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
   TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
   TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
   TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
   TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
   TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));

Marlin/src/HAL/HC32/endstop_interrupts.cpp

@@ -101,12 +101,14 @@ void setup_endstop_interrupts() {
 
   SETUP(Z_MIN_PROBE);
 
+  SETUP(CALIBRATION);
+
   #undef SETUP
 }
 
 // Ensure 1 - 10 IRQs are registered
 // Disable some endstops if you encounter this error
-#define ENDSTOPS_INTERRUPTS_COUNT COUNT_ENABLED(USE_X_MAX, USE_X_MIN, USE_X2_MAX, USE_X2_MIN, USE_Y_MAX, USE_Y_MIN, USE_Y2_MAX, USE_Y2_MIN, USE_Z_MAX, USE_Z_MIN, USE_Z2_MAX, USE_Z2_MIN, USE_Z3_MAX, USE_Z3_MIN, USE_Z4_MAX, USE_Z4_MIN, USE_Z_MIN_PROBE)
+#define ENDSTOPS_INTERRUPTS_COUNT COUNT_ENABLED(USE_X_MAX, USE_X_MIN, USE_X2_MAX, USE_X2_MIN, USE_Y_MAX, USE_Y_MIN, USE_Y2_MAX, USE_Y2_MIN, USE_Z_MAX, USE_Z_MIN, USE_Z2_MAX, USE_Z2_MIN, USE_Z3_MAX, USE_Z3_MIN, USE_Z4_MAX, USE_Z4_MIN, USE_Z_MIN_PROBE, USE_CALIBRATION)
 #if ENDSTOPS_INTERRUPTS_COUNT > 10
   #error "Too many endstop interrupts! HC32F460 only supports 10 endstop interrupts."
 #elif ENDSTOPS_INTERRUPTS_COUNT == 0

Marlin/src/HAL/LPC1768/HAL.h

@@ -159,7 +159,7 @@ constexpr pin_t GET_PIN_MAP_PIN(const int16_t index) {
 // Parse a G-code word into a pin index
 int16_t PARSED_PIN_INDEX(const char code, const int16_t dval);
 // P0.6 thru P0.9 are for the onboard SD card
-#define HAL_SENSITIVE_PINS P0_06, P0_07, P0_08, P0_09,
+#define HAL_SENSITIVE_PINS P0_06, P0_07, P0_08, P0_09
 
 // ------------------------
 // Defines

Marlin/src/HAL/LPC1768/endstop_interrupts.h

@@ -146,6 +146,12 @@ void setup_endstop_interrupts() {
     #endif
     _ATTACH(Z_MIN_PROBE_PIN);
   #endif
+  #if USE_CALIBRATION
+    #if !LPC1768_PIN_INTERRUPT_M(CALIBRATION_PIN)
+      #error "CALIBRATION_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
+    #endif
+    _ATTACH(CALIBRATION_PIN);
+  #endif
   #if USE_I_MAX
     #if !LPC1768_PIN_INTERRUPT_M(I_MAX_PIN)
       #error "I_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."

Marlin/src/HAL/SAMD21/endstop_interrupts.h

@@ -83,6 +83,7 @@
 #define MATCH_Z4_MAX_EILINE(P) TERN0(USE_Z4_MAX, DEFER4(MATCH_EILINE)(P, Z4_MAX_PIN))
 #define MATCH_Z4_MIN_EILINE(P) TERN0(USE_Z4_MIN, DEFER4(MATCH_EILINE)(P, Z4_MIN_PIN))
 #define MATCH_Z_MIN_PROBE_EILINE(P) TERN0(USE_Z_MIN_PROBE, DEFER4(MATCH_EILINE)(P, Z_MIN_PROBE_PIN))
+#define MATCH_CALIBRATION_EILINE(P) TERN0(USE_CALIBRATION, DEFER4(MATCH_EILINE)(P, CALIBRATION_PIN))
 
 #define AVAILABLE_EILINE(P) ( PIN_TO_EILINE(P) != -1    \
   && !MATCH_X_MAX_EILINE(P) && !MATCH_X_MIN_EILINE(P)   \
@@ -99,7 +100,8 @@
   && !MATCH_Z2_MAX_EILINE(P) && !MATCH_Z2_MIN_EILINE(P) \
   && !MATCH_Z3_MAX_EILINE(P) && !MATCH_Z3_MIN_EILINE(P) \
   && !MATCH_Z4_MAX_EILINE(P) && !MATCH_Z4_MIN_EILINE(P) \
-  && !MATCH_Z_MIN_PROBE_EILINE(P) )
+  && !MATCH_Z_MIN_PROBE_EILINE(P)                       \
+  && !MATCH_CALIBRATION_EILINE(P) )
 
 // One ISR for all EXT-Interrupts
 void endstop_ISR() { endstops.update(); }
@@ -208,6 +210,12 @@ void setup_endstop_interrupts() {
     #endif
     _ATTACH(Z_MIN_PROBE_PIN);
   #endif
+  #if USE_CALIBRATION
+    #if !AVAILABLE_EILINE(CALIBRATION_PIN)
+      #error "CALIBRATION_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
+    #endif
+    _ATTACH(CALIBRATION_PIN);
+  #endif
   #if USE_I_MAX
     #if !AVAILABLE_EILINE(I_MAX_PIN)
       #error "I_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."

Marlin/src/HAL/SAMD51/endstop_interrupts.h

@@ -82,6 +82,7 @@
 #define MATCH_Z4_MAX_EILINE(P) TERN0(USE_Z4_MAX, DEFER4(MATCH_EILINE)(P, Z4_MAX_PIN))
 #define MATCH_Z4_MIN_EILINE(P) TERN0(USE_Z4_MIN, DEFER4(MATCH_EILINE)(P, Z4_MIN_PIN))
 #define MATCH_Z_MIN_PROBE_EILINE(P) TERN0(USE_Z_MIN_PROBE, DEFER4(MATCH_EILINE)(P, Z_MIN_PROBE_PIN))
+#define MATCH_CALIBRATION_EILINE(P) TERN0(USE_CALIBRATION, DEFER4(MATCH_EILINE)(P, CALIBRATION_PIN))
 
 #define AVAILABLE_EILINE(P) ( PIN_TO_EILINE(P) != -1    \
   && !MATCH_X_MAX_EILINE(P) && !MATCH_X_MIN_EILINE(P)   \
@@ -98,7 +99,8 @@
   && !MATCH_Z2_MAX_EILINE(P) && !MATCH_Z2_MIN_EILINE(P) \
   && !MATCH_Z3_MAX_EILINE(P) && !MATCH_Z3_MIN_EILINE(P) \
   && !MATCH_Z4_MAX_EILINE(P) && !MATCH_Z4_MIN_EILINE(P) \
-  && !MATCH_Z_MIN_PROBE_EILINE(P) )
+  && !MATCH_Z_MIN_PROBE_EILINE(P)                       \
+  && !MATCH_CALIBRATION_EILINE(P) )
 
 // One ISR for all EXT-Interrupts
 void endstop_ISR() { endstops.update(); }
@@ -183,6 +185,12 @@ void setup_endstop_interrupts() {
     #endif
     _ATTACH(Z_MIN_PROBE_PIN);
   #endif
+  #if USE_CALIBRATION
+    #if !AVAILABLE_EILINE(CALIBRATION_PIN)
+      #error "CALIBRATION_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
+    #endif
+    _ATTACH(CALIBRATION_PIN);
+  #endif
   #if USE_I_MAX
     #if !AVAILABLE_EILINE(I_MAX_PIN)
       #error "I_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."

Marlin/src/HAL/STM32/endstop_interrupts.h

@@ -45,6 +45,7 @@ void setup_endstop_interrupts() {
   TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
   TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
   TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
   TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
   TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
   TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));

Marlin/src/HAL/STM32/inc/Conditionals_adv.h

@@ -30,6 +30,3 @@
   #undef F_CPU
   #define F_CPU BOARD_F_CPU
 #endif
-
-// The Sensitive Pins array is not optimizable
-#define RUNTIME_ONLY_ANALOG_TO_DIGITAL

Marlin/src/HAL/STM32F1/endstop_interrupts.h

@@ -70,6 +70,7 @@ void setup_endstop_interrupts() {
   TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
   TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
   TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
   TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
   TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
   TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));

Marlin/src/HAL/TEENSY31_32/endstop_interrupts.h

@@ -64,6 +64,7 @@ void setup_endstop_interrupts() {
   TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
   TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
   TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
   TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
   TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
   TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));

Marlin/src/HAL/TEENSY35_36/endstop_interrupts.h

@@ -63,6 +63,7 @@ void setup_endstop_interrupts() {
   TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
   TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
   TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
   TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
   TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
   TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));

Marlin/src/HAL/TEENSY40_41/endstop_interrupts.h

@@ -63,6 +63,7 @@ void setup_endstop_interrupts() {
   TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
   TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
   TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
   TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
   TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
   TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));

Marlin/src/MarlinCore.cpp

@@ -308,23 +308,12 @@ bool wait_for_heatup = false;
 #pragma GCC diagnostic push
 #pragma GCC diagnostic ignored "-Wnarrowing"
 
-#ifndef RUNTIME_ONLY_ANALOG_TO_DIGITAL
-  template <pin_t ...D>
-  constexpr pin_t OnlyPins<_SP_END, D...>::table[sizeof...(D)];
-#endif
-
 bool pin_is_protected(const pin_t pin) {
-  #ifdef RUNTIME_ONLY_ANALOG_TO_DIGITAL
-    static const pin_t sensitive_pins[] PROGMEM = { SENSITIVE_PINS };
-    const size_t pincount = COUNT(sensitive_pins);
-  #else
-    static constexpr size_t pincount = OnlyPins<SENSITIVE_PINS>::size;
-    static const pin_t (&sensitive_pins)[pincount] PROGMEM = OnlyPins<SENSITIVE_PINS>::table;
-  #endif
-  for (uint8_t i = 0; i < pincount; ++i) {
-    const pin_t * const pptr = &sensitive_pins[i];
-    if (pin == (sizeof(pin_t) == 2 ? (pin_t)pgm_read_word(pptr) : (pin_t)pgm_read_byte(pptr))) return true;
-  }
+  #define pgm_read_pin(P) (sizeof(pin_t) == 2 ? (pin_t)pgm_read_word(P) : (pin_t)pgm_read_byte(P))
+  for (uint8_t i = 0; i < COUNT(sensitive_dio); ++i)
+    if (pin == pgm_read_pin(&sensitive_dio[i])) return true;
+  for (uint8_t i = 0; i < COUNT(sensitive_aio); ++i)
+    if (pin == analogInputToDigitalPin(pgm_read_pin(&sensitive_dio[i]))) return true;
   return false;
 }
 
@@ -1334,14 +1323,19 @@ void setup() {
     SETUP_RUN(card.mount());          // Mount media with settings before first_load
   #endif
 
-  SETUP_RUN(settings.first_load());   // Load data from EEPROM if available (or use defaults)
-                                      // This also updates variables in the planner, elsewhere
+  // Prepare some LCDs to display early
+  #if HAS_EARLY_LCD_SETTINGS
+    SETUP_RUN(settings.load_lcd_state());
+  #endif
 
   #if ALL(HAS_WIRED_LCD, SHOW_BOOTSCREEN)
     SETUP_RUN(ui.show_bootscreen());
     const millis_t bootscreen_ms = millis();
   #endif
 
+  SETUP_RUN(settings.first_load());   // Load data from EEPROM if available (or use defaults)
+                                      // This also updates variables in the planner, elsewhere
+
   #if ENABLED(PROBE_TARE)
     SETUP_RUN(probe.tare_init());
   #endif

Marlin/src/core/drivers.h

@@ -103,7 +103,8 @@
 
 #define HAS_TRINAMIC HAS_TRINAMIC_CONFIG
 
-#if (    HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2160_STANDALONE) \
+#if (    HAS_DRIVER(TMC2100) \
+      || HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2160_STANDALONE) \
       || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC2209_STANDALONE) \
       || HAS_DRIVER(TMC2660_STANDALONE) || HAS_DRIVER(TMC5130_STANDALONE) \
       || HAS_DRIVER(TMC5160_STANDALONE) )

Marlin/src/core/language.h

@@ -355,6 +355,8 @@
 #define STR_PROBE_EN                        "probe_en"
 #define STR_FILAMENT                        "filament"
 
+#define STR_CALIBRATION                     "calibration"
+
 // General axis names
 #define STR_X "X"
 #define STR_Y "Y"

Marlin/src/feature/powerloss.cpp

@@ -205,6 +205,9 @@ void PrintJobRecovery::save(const bool force/*=false*/, const float zraise/*=POW
     // info.sdpos and info.current_position are pre-filled from the Stepper ISR
 
     info.feedrate = uint16_t(MMS_TO_MMM(feedrate_mm_s));
+    info.feedrate_percentage = feedrate_percentage;
+    COPY(info.flow_percentage, planner.flow_percentage);
+
     info.zraise = zraise;
     info.flag.raised = raised;                      // Was Z raised before power-off?
 
@@ -216,7 +219,7 @@ void PrintJobRecovery::save(const bool force/*=false*/, const float zraise/*=POW
     #if DISABLED(NO_VOLUMETRICS)
       info.flag.volumetric_enabled = parser.volumetric_enabled;
       #if HAS_MULTI_EXTRUDER
-        EXTRUDER_LOOP() info.filament_size[e] = planner.filament_size[e];
+        COPY(info.filament_size, planner.filament_size);
       #else
         if (parser.volumetric_enabled) info.filament_size[0] = planner.filament_size[active_extruder];
       #endif
@@ -269,7 +272,10 @@ void PrintJobRecovery::save(const bool force/*=false*/, const float zraise/*=POW
 
         #if POWER_LOSS_RETRACT_LEN
           // Retract filament now
-          gcode.process_subcommands_now(F("G1 F3000 E-" STRINGIFY(POWER_LOSS_RETRACT_LEN)));
+          const uint16_t old_flow = planner.flow_percentage[active_extruder];
+          planner.set_flow(active_extruder, 100);
+          gcode.process_subcommands_now(F("G1F3000E-" STRINGIFY(POWER_LOSS_RETRACT_LEN)));
+          planner.set_flow(active_extruder, old_flow);
         #endif
 
         #if POWER_LOSS_ZRAISE
@@ -555,8 +561,12 @@ void PrintJobRecovery::resume() {
   // Move back down to the saved Z for printing
   PROCESS_SUBCOMMANDS_NOW(TS(F("G1F600Z"), p_float_t(z_print, 3)));
 
-  // Restore the feedrate
+  // Restore the feedrate and percentage
   PROCESS_SUBCOMMANDS_NOW(TS(F("G1F"), info.feedrate));
+  feedrate_percentage = info.feedrate_percentage;
+
+  // Flowrate percentage
+  EXTRUDER_LOOP() planner.set_flow(e, info.flow_percentage[e]);
 
   // Restore E position with G92.9
   PROCESS_SUBCOMMANDS_NOW(TS(F("G92.9E"), p_float_t(resume_pos.e, 3)));
@@ -589,7 +599,8 @@ void PrintJobRecovery::resume() {
         }
         DEBUG_EOL();
 
-        DEBUG_ECHOLNPGM("feedrate: ", info.feedrate);
+        DEBUG_ECHOLN(F("feedrate: "), info.feedrate, F(" x "), info.feedrate_percentage, '%');
+        EXTRUDER_LOOP() DEBUG_ECHOLN('E', e + 1, F(" flow %: "), info.flow_percentage[e]);
 
         DEBUG_ECHOLNPGM("zraise: ", info.zraise, " ", info.flag.raised ? "(before)" : "");
 

Marlin/src/feature/powerloss.h

@@ -59,6 +59,8 @@ typedef struct {
   // Machine state
   xyze_pos_t current_position;
   uint16_t feedrate;
+  int16_t feedrate_percentage;
+  uint16_t flow_percentage[EXTRUDERS];
 
   float zraise;
 

Marlin/src/gcode/calibrate/G425.cpp

@@ -181,20 +181,6 @@ inline void park_above_object(measurements_t &m, const float uncertainty) {
 
 #endif
 
-#if !PIN_EXISTS(CALIBRATION)
-  #include "../../module/probe.h"
-#endif
-
-inline bool read_calibration_pin() {
-  return (
-    #if PIN_EXISTS(CALIBRATION)
-      READ(CALIBRATION_PIN) != CALIBRATION_PIN_INVERTING
-    #else
-      PROBE_TRIGGERED()
-    #endif
-  );
-}
-
 /**
  * Move along axis in the specified dir until the probe value becomes stop_state,
  * then return the axis value.
@@ -205,18 +191,18 @@ inline bool read_calibration_pin() {
  *   fast         in - Fast vs. precise measurement
  */
 float measuring_movement(const AxisEnum axis, const int dir, const bool stop_state, const bool fast) {
-  const float step     = fast ? 0.25 : CALIBRATION_MEASUREMENT_RESOLUTION;
   const feedRate_t mms = fast ? MMM_TO_MMS(CALIBRATION_FEEDRATE_FAST) : MMM_TO_MMS(CALIBRATION_FEEDRATE_SLOW);
   const float limit    = fast ? 50 : 5;
 
   destination = current_position;
-  for (float travel = 0; travel < limit; travel += step) {
-    destination[axis] += dir * step;
-    do_blocking_move_to((xyz_pos_t)destination, mms);
-    planner.synchronize();
-    if (read_calibration_pin() == stop_state) break;
-  }
-  return destination[axis];
+  destination[axis] += dir * limit;
+  endstops.enable_calibration_probe(true, stop_state);
+  do_blocking_move_to((xyz_pos_t)destination, mms);
+  endstops.enable_calibration_probe(false);
+  endstops.hit_on_purpose();
+  set_current_from_steppers_for_axis(axis);
+  sync_plan_position();
+  return current_position[axis];
 }
 
 /**

Marlin/src/inc/Changes.h

@@ -697,6 +697,8 @@
   #error "Z_PROBE_END_SCRIPT is now EVENT_GCODE_AFTER_G29."
 #elif defined(WIFI_SERIAL)
   #error "WIFI_SERIAL is now WIFI_SERIAL_PORT."
+#elif defined(CALIBRATION_MEASUREMENT_RESOLUTION)
+  #error "CALIBRATION_MEASUREMENT_RESOLUTION is no longer needed and should be removed."
 #endif
 
 // Changes to Probe Temp Compensation (#17392)