Edit homing related config

Marlin/Configuration_adv.h

@@ -925,13 +925,13 @@
 
 #define SENSORLESS_BACKOFF_MM  { 2, 2, 0 }  // (linear=mm, rotational=°) Backoff from endstops before sensorless homing
 
-#define HOMING_BUMP_MM      { 5, 5, 2 }       // (linear=mm, rotational=°) Backoff from endstops after first bump
+#define HOMING_BUMP_MM      { 0, 0, 2 }       // (linear=mm, rotational=°) Backoff from endstops after first bump
 #define HOMING_BUMP_DIVISOR { 2, 2, 4 }       // Re-Bump Speed Divisor (Divides the Homing Feedrate)
 
 //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 }  // (linear=mm, rotational=°) Backoff from endstops after homing
 //#define XY_COUNTERPART_BACKOFF_MM 0         // (mm) Backoff X after homing Y, and vice-versa
 
-//#define QUICK_HOME                          // If G28 contains XY do a diagonal move first
+#define QUICK_HOME                          // If G28 contains XY do a diagonal move first
 //#define HOME_Y_BEFORE_X                     // If G28 contains XY home Y before X
 //#define HOME_Z_FIRST                        // Home Z first. Requires a real endstop (not a probe).
 //#define CODEPENDENT_XY_HOMING               // If X/Y can't home without homing Y/X first
@@ -3409,7 +3409,7 @@
 
   #if ANY(SENSORLESS_HOMING, SENSORLESS_PROBING)
     // TMC2209: 0...255. TMC2130: -64...63
-    #define X_STALL_SENSITIVITY  100
+    #define X_STALL_SENSITIVITY  80
     #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY
     #define Y_STALL_SENSITIVITY  100
     #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY