Version 1.2c

Changelog:

• Fixed encoder push bug in pattern edit mode while MIDI synced. Resolves issue #23
• Track mode reworked to function more like pattern mode (last sync state remembered when changing modes). Resolves issue #24

Update the Yocto firmware by holding step buttons 1, 3, and 5 while powering the unit on. Start sending the SysEx to the Yocto's MIDI IN port within five seconds. Be sure to put a delay between SysEx messages of ~200ms, or the Yocto may not take the update. Use of MIDI-OX on Windows or SysExLibrarian on Mac is recommended.

If there are issues, don't hesitate to bring them up here or on the e-licktronic forum. Thanks to rv0 for his awesome work on this!

Version 1.2b

Changelog:

• Roll mode now works with the trigger outputs

Update the Yocto firmware by holding step buttons 1, 3, and 5 while powering the unit on. Start sending the SysEx to the Yocto's MIDI IN port within five seconds. Be sure to put a delay between SysEx messages of ~200ms, or the Yocto may not take the update. Use of MIDI-OX on Windows or SysExLibrarian on Mac is recommended.

If there are issues, don't hesitate to bring them up here or on the e-licktronic forum. Thanks to rv0 for his awesome work on this!

Version 1.2a

Changelog:

• Added TapWrite function - see the fancy new manual for details

Update the Yocto firmware by holding step buttons 1, 3, and 5 while powering the unit on. Start sending the SysEx to the Yocto's MIDI IN port within five seconds. Be sure to put a delay between SysEx messages of ~200ms, or the Yocto may not take the update. Use of MIDI-OX on Windows and SysExLibrarian on Mac is recommended.

If there are issues, don't hesitate to bring them up here or on the e-licktronic forum. Thanks to rv0 for his awesome work on this!

Version 1.1a

Changelog:

• Added MIDI dump and restore function - see the fancy new manual for details
• Fixed sync issues when slaved to MIDI clock

Update the Yocto firmware by holding step buttons 1, 3, and 5 while powering the unit on. Start sending the SysEx to the Yocto's MIDI IN port within five seconds. Be sure to put a delay between SysEx messages of ~200ms, or the Yocto may not take the update. Use of MIDI-OX on Windows and SysExLibrarian on Mac is recommended.

If there are issues, don't hesitate to bring them up here or on the e-licktronic forum. Thanks to rv0 for his awesome work on this!

Version 1.0g

Changelog:

• Fixed roll in MIDI Slave mode so that the roll is in-time with the received MIDI clock.

Update the Yocto firmware by holding step buttons 1, 3, and 5 while powering the unit on. Start sending the SysEx to the Yocto's MIDI IN port within five seconds. Be sure to put a delay between SysEx messages of ~200ms, or the Yocto may not take the update. Use of MIDI-OX on Windows and SysExLibrarian on Mac is recommended.

If there are issues, don't hesitate to bring them up here or on the e-licktronic forum.

Version 1.0f

Changelog:

• Fixes trigger 2 so that it functions like trigger 1.

Update the Yocto firmware by holding step buttons 1, 3, and 5 while powering the unit on. Start sending the SysEx to the Yocto's MIDI IN port within five seconds. Be sure to put a delay between SysEx messages of ~200ms, or the Yocto may not take the update. Use of MIDI-OX on Windows and SysExLibrarian on Mac is recommended.

If there are issues, don't hesitate to bring them up here or on the e-licktronic forum.

Version 1.0e

Changelog:

• Fixes timing in MIDI Expander Mode. This change was authored by Jacob Vosmaer. He is great!

Update the Yocto firmware by holding step buttons 1, 3, and 5 while powering the unit on. Start sending the SysEx to the Yocto's MIDI IN port within five seconds. Be sure to put a delay between SysEx messages of ~200ms, or the Yocto may not take the update. Use of MIDI-OX on Windows and SysExLibrarian on Mac is recommended.

If there are issues, don't hesitate to bring them up here or on the e-licktronic forum.

Version 1.0d

Changelog:

• Fixes the bug in pattern edit mode where pushing multiple buttons doesn't work as one might expect

Update the Yocto firmware by holding step buttons 1, 3, and 5 while powering the unit on. Start sending the SysEx to the Yocto's MIDI IN port within five seconds. Be sure to put a delay between SysEx messages of ~200ms, or the Yocto may not take the update. Use of MIDI-OX on Windows and SysExLibrarian on Mac is recommended.

If there are issues, don't hesitate to bring them up here or on the e-licktronic forum.