Intermediate fix temp

Mk2_3phase_RFdatalog_temp/config.h

@@ -13,7 +13,7 @@
 #define _CONFIG_H
 
 //--------------------------------------------------------------------------------------------------
-//#define TEMP_ENABLED  /**< this line must be commented out if the temperature sensor is not present */
+//#define TEMP_ENABLED /**< this line must be commented out if the temperature sensor is not present */
 //#define RF_PRESENT  /**< this line must be commented out if the RFM12B module is not present */
 
 // Output messages
@@ -51,8 +51,8 @@ inline constexpr bool OVERRIDE_PIN_PRESENT{ false };                    /**< set
 #endif
 
 inline constexpr bool WATCHDOG_PIN_PRESENT{ true }; /**< set it to 'true' if there's a watch led */
-inline constexpr bool RELAY_DIVERSION{ false };      /**< set it to 'true' if a relay is used for diversion */
-inline constexpr bool DUAL_TARIFF{ false };          /**< set it to 'true' if there's a dual tariff each day AND the router is connected to the billing meter */
+inline constexpr bool RELAY_DIVERSION{ false };     /**< set it to 'true' if a relay is used for diversion */
+inline constexpr bool DUAL_TARIFF{ false };         /**< set it to 'true' if there's a dual tariff each day AND the router is connected to the billing meter */
 
 // ----------- Pinout assignments -----------
 //
@@ -73,17 +73,17 @@ inline constexpr bool DUAL_TARIFF{ false };          /**< set it to 'true' if th
 // D13 is SCK
 
 inline constexpr uint8_t physicalLoadPin[NO_OF_DUMPLOADS]{ 5, 6, 7 };         /**< for 3-phase PCB, Load #1/#2/#3 (Rev 2 PCB) */
-inline constexpr uint8_t loadPrioritiesAtStartup[NO_OF_DUMPLOADS]{ 0, 1, 2}; /**< load priorities and states at startup */
+inline constexpr uint8_t loadPrioritiesAtStartup[NO_OF_DUMPLOADS]{ 0, 1, 2 }; /**< load priorities and states at startup */
 
 // Set the value to 0xff when the pin is not needed (feature deactivated)
 inline constexpr uint8_t relayPin{ 0xff };      /**< for 3-phase PCB, relay trigger */
 inline constexpr uint8_t dualTariffPin{ 0xff }; /**< for 3-phase PCB, off-peak trigger */
 inline constexpr uint8_t diversionPin{ 0xff };  /**< if LOW, set diversion on standby */
 inline constexpr uint8_t rotationPin{ 0xff };   /**< if LOW, trigger a load priority rotation */
 inline constexpr uint8_t forcePin{ 0xff };      /**< for 3-phase PCB, force pin */
-inline constexpr uint8_t watchDogPin{ 4 };   /**< watch dog LED */
+inline constexpr uint8_t watchDogPin{ 4 };      /**< watch dog LED */
 
-inline constexpr uint8_t tempSensorPin{ 0xff }; /**< for 3-phase PCB, sensor pin */
+inline constexpr uint8_t tempSensorPin{ 10 }; /**< for 3-phase PCB, sensor pin */
 
 inline constexpr relayOutput relay_Output{ relayPin, 1000, 200, 1, 1 }; /**< config for relay diversion, see class definition for defaults and advanced options */
 
@@ -92,11 +92,7 @@ inline constexpr pairForceLoad rg_ForceLoad[NO_OF_DUMPLOADS]{ { -3, 2 } }; /**<
 
 inline constexpr int16_t iTemperatureThreshold{ 100 }; /**< the temperature threshold to stop overriding in °C */
 
-inline constexpr DeviceAddress sensorAddrs[]{ { 0x28, 0xBE, 0x41, 0x6B, 0x09, 0x00, 0x00, 0xA4 },
-                                              { 0x28, 0xED, 0x5B, 0x6A, 0x09, 0x00, 0x00, 0x9D },
-                                              { 0x28, 0xDB, 0x6D, 0x6A, 0x09, 0x00, 0x00, 0xDA },
-                                              { 0x28, 0x59, 0x1F, 0x6A, 0x09, 0x00, 0x00, 0xB0 },
-                                              { 0x28, 0x1B, 0xD7, 0x6A, 0x09, 0x00, 0x00, 0xB7 } }; /**< list of temperature sensor Addresses */
+inline constexpr DeviceAddress sensorAddrs[]{ { 0x28, 0xE9, 0xD1, 0xB0, 0x1B, 0x13, 0x01, 0xCF } }; /**< list of temperature sensor Addresses */
 
 inline constexpr uint32_t ROTATION_AFTER_CYCLES{ 8UL * 3600UL * SUPPLY_FREQUENCY }; /**< rotates load priorities after this period of inactivity */
 

Mk2_3phase_RFdatalog_temp/utils_temp.h

@@ -15,6 +15,7 @@
 #include <Arduino.h>
 
 #include "constants.h"
+#include "config.h"
 
 using ScratchPad = uint8_t[9];
 using DeviceAddress = uint8_t[8];