Add module for NXP PN7160 NFC chip as token provider

CMakeLists.txt

@@ -108,6 +108,7 @@ else()
 
     find_package(fsm REQUIRED)
     find_package(slac REQUIRED)
+    find_package(libnfc-nci REQUIRED)
 
     find_package(pugixml REQUIRED)
     find_package(CURL 7.84.0 REQUIRED)

dependencies.yaml

@@ -87,6 +87,11 @@ ext-mbedtls:
 everest-utils:
   git: https://github.com/EVerest/everest-utils.git
   git_tag: v0.4.4
+# linux_libnfc-nci for RFID
+libnfc-nci:
+  git: https://github.com/EVerest/linux_libnfc-nci.git
+  git_tag: 2024.11.0
+  cmake_condition: "EVEREST_DEPENDENCY_ENABLED_LIBNFC_NCI"
 
 # unit testing
 gtest:

module-dependencies.cmake

@@ -58,6 +58,11 @@ ev_define_dependency(
     OUTPUT_VARIABLE_SUFFIX LIBISO15118
     DEPENDENT_MODULES_LIST Evse15118D20)
 
+ev_define_dependency(
+    DEPENDENCY_NAME libnfc-nci
+    OUTPUT_VARIABLE_SUFFIX LIBNFC_NCI
+    DEPENDENT_MODULES_LIST PN7160TokenProvider)
+
 if(NOT everest-gpio IN_LIST EVEREST_EXCLUDE_DEPENDENCIES)
     set(EVEREST_DEPENDENCY_ENABLED_EVEREST_GPIO ON)
 else()

modules/CMakeLists.txt

@@ -19,6 +19,7 @@ ev_add_module(OCPP201)
 ev_add_module(PacketSniffer)
 ev_add_module(PersistentStore)
 ev_add_module(PN532TokenProvider)
+ev_add_module(PN7160TokenProvider)
 ev_add_module(PyEvJosev)
 ev_add_module(Setup)
 ev_add_module(SerialCommHub)

modules/PN7160TokenProvider/CMakeLists.txt

@@ -0,0 +1,41 @@
+#
+# AUTO GENERATED - MARKED REGIONS WILL BE KEPT
+# template version 3
+#
+
+# module setup:
+#   - ${MODULE_NAME}: module name
+ev_setup_cpp_module()
+
+# ev@bcc62523-e22b-41d7-ba2f-825b493a3c97:v1
+
+target_include_directories(${MODULE_NAME}
+PRIVATE
+    "common"
+)
+
+target_sources(${MODULE_NAME}
+    PRIVATE
+        "main/libnfc_handler.cpp"
+)
+
+target_link_libraries(${MODULE_NAME}
+    PRIVATE
+        "libnfc_nci"
+)
+# ev@bcc62523-e22b-41d7-ba2f-825b493a3c97:v1
+
+target_sources(${MODULE_NAME}
+    PRIVATE
+        "main/auth_token_providerImpl.cpp"
+)
+
+# ev@c55432ab-152c-45a9-9d2e-7281d50c69c3:v1
+
+install(FILES
+            "libnfc-nci_config/libnfc-nxp.conf"
+            "libnfc-nci_config/libnfc-nci.conf"
+        DESTINATION
+            "${CMAKE_INSTALL_SYSCONFDIR}/everest/libnfc_config/")
+
+# ev@c55432ab-152c-45a9-9d2e-7281d50c69c3:v1

modules/PN7160TokenProvider/PN7160TokenProvider.cpp

@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: Apache-2.0
+// Copyright 2022 - 2024 Pionix GmbH and Contributors to EVerest
+#include "PN7160TokenProvider.hpp"
+
+namespace module {
+
+void PN7160TokenProvider::init() {
+    invoke_init(*p_main);
+}
+
+void PN7160TokenProvider::ready() {
+    invoke_ready(*p_main);
+}
+
+} // namespace module

modules/PN7160TokenProvider/PN7160TokenProvider.hpp

@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: Apache-2.0
+// Copyright Pionix GmbH and Contributors to EVerest
+#ifndef PN7160TOKEN_PROVIDER_HPP
+#define PN7160TOKEN_PROVIDER_HPP
+
+//
+// AUTO GENERATED - MARKED REGIONS WILL BE KEPT
+// template version 2
+//
+
+#include "ld-ev.hpp"
+
+// headers for provided interface implementations
+#include <generated/interfaces/auth_token_provider/Implementation.hpp>
+
+// ev@4bf81b14-a215-475c-a1d3-0a484ae48918:v1
+// insert your custom include headers here
+// ev@4bf81b14-a215-475c-a1d3-0a484ae48918:v1
+
+namespace module {
+
+struct Conf {};
+
+class PN7160TokenProvider : public Everest::ModuleBase {
+public:
+    PN7160TokenProvider() = delete;
+    PN7160TokenProvider(const ModuleInfo& info, std::unique_ptr<auth_token_providerImplBase> p_main, Conf& config) :
+        ModuleBase(info), p_main(std::move(p_main)), config(config){};
+
+    const std::unique_ptr<auth_token_providerImplBase> p_main;
+    const Conf& config;
+
+    // ev@1fce4c5e-0ab8-41bb-90f7-14277703d2ac:v1
+    // insert your public definitions here
+    // ev@1fce4c5e-0ab8-41bb-90f7-14277703d2ac:v1
+
+protected:
+    // ev@4714b2ab-a24f-4b95-ab81-36439e1478de:v1
+    // insert your protected definitions here
+    // ev@4714b2ab-a24f-4b95-ab81-36439e1478de:v1
+
+private:
+    friend class LdEverest;
+    void init();
+    void ready();
+
+    // ev@211cfdbe-f69a-4cd6-a4ec-f8aaa3d1b6c8:v1
+    // insert your private definitions here
+    // ev@211cfdbe-f69a-4cd6-a4ec-f8aaa3d1b6c8:v1
+};
+
+// ev@087e516b-124c-48df-94fb-109508c7cda9:v1
+// insert other definitions here
+// ev@087e516b-124c-48df-94fb-109508c7cda9:v1
+
+} // namespace module
+
+#endif // PN7160TOKEN_PROVIDER_HPP

modules/PN7160TokenProvider/doc.rst

@@ -0,0 +1,27 @@
+.. _everest_modules_handwritten_PN7160TokenProvider:
+
+*******************
+PN7160TokenProvider
+*******************
+
+This module provides authentication tokens obtained from RFID cards via the NXP PN7160 NFC chip.
+
+It uses a modified *libnfc-nci* as external dependency to interface the chip via I²C or SPI, either from user space or via a kernel module.
+
+Hardware Interface Configuration
+================================
+
+Configuration of the hardware interface is possible at runtime.
+The module installs two configuration files:
+
+* ``libnfc-nci_config/libnfc-nci.conf``: define NFC options
+* ``libnfc-nci_config/libnfc-nxp.conf``: choose the hardware interface (kernel module vs. userspace; I²C vs. SPI, ...)
+
+Module Configuration
+====================
+
+The EVerest module can be adjusted in its behaviour as follows:
+
+* ``token_debounce_interval_ms``: Publish tokens in minimum intervall of this timespan in order not to flood subscribers.
+* ``disable_nfc_rfid``: Allows to load the module without actually initializing the hardware.
+

modules/PN7160TokenProvider/libnfc-nci_config/libnfc-nci.conf

@@ -0,0 +1,121 @@
+##############################################################################
+#
+#  Note by PIONIX GmbH
+#  ===================
+#
+#  Original file distributed NXP
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+##############################################################################
+
+########################### PN7160 libnfc-nci.conf ############################
+
+###############################################################################
+# Application options
+APPL_TRACE_LEVEL=0xFF
+PROTOCOL_TRACE_LEVEL=0xFFFFFFFF
+
+NFC_DEBUG_ENABLED=0x00
+
+###############################################################################
+# File used for NFA storage
+NFA_STORAGE="/data/vendor/nfc"
+
+###############################################################################
+# Forcing HOST to listen for a selected protocol
+# 0x00 : Disable Host Listen
+# 0x01 : Enable Host to Listen (A)  for ISO-DEP tech A
+# 0x02 : Enable Host to Listen (B)  for ISO-DEP tech B
+# 0x04 : Enable Host to Listen (F)  for T3T Tag Type Protocol tech F
+# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F
+HOST_LISTEN_TECH_MASK=0x07
+
+###############################################################################
+# When screen is turned off, specify the desired power state of the controller.
+# 0: power-off-sleep state; DEFAULT
+# 1: full-power state
+# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
+SCREEN_OFF_POWER_STATE=1
+
+###############################################################################
+# NCI Hal Module name
+NCI_HAL_MODULE="nfc_nci.pn54x"
+
+###############################################################################
+# Force tag polling for the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
+#            NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
+#            NFA_TECHNOLOGY_MASK_KOVIO | NFA_TECHNOLOGY_MASK_A_ACTIVE |
+#            NFA_TECHNOLOGY_MASK_F_ACTIVE
+#
+# Notable bits:
+# NFA_TECHNOLOGY_MASK_A             0x01    /* NFC Technology A             */
+# NFA_TECHNOLOGY_MASK_B             0x02    /* NFC Technology B             */
+# NFA_TECHNOLOGY_MASK_F             0x04    /* NFC Technology F             */
+# NFA_TECHNOLOGY_MASK_ISO15693	    0x08    /* Proprietary Technology       */
+# NFA_TECHNOLOGY_MASK_KOVIO	        0x20    /* Proprietary Technology       */
+# NFA_TECHNOLOGY_MASK_A_ACTIVE      0x40    /* NFC Technology A active mode */
+# NFA_TECHNOLOGY_MASK_F_ACTIVE      0x80    /* NFC Technology F active mode */
+# This flag when set to zero will disable Reader mode.
+POLLING_TECH_MASK=0xCF
+
+###############################################################################
+# Force P2P to only listen for the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
+#            NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE
+#
+# Notable bits:
+# NFA_TECHNOLOGY_MASK_A	            0x01    /* NFC Technology A             */
+# NFA_TECHNOLOGY_MASK_F	            0x04    /* NFC Technology F             */
+# NFA_TECHNOLOGY_MASK_A_ACTIVE      0x40    /* NFC Technology A active mode */
+# NFA_TECHNOLOGY_MASK_F_ACTIVE      0x80    /* NFC Technology F active mode */
+# This flag when set to zero will disable P2P Listen mode.
+P2P_LISTEN_TECH_MASK=0xC5
+
+PRESERVE_STORAGE=0x01
+
+###############################################################################
+# AID_MATCHING constants
+# AID_MATCHING_EXACT_ONLY 0x00
+# AID_MATCHING_EXACT_OR_PREFIX 0x01
+# AID_MATCHING_PREFIX_ONLY 0x02
+# AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03
+AID_MATCHING_MODE=0x03
+
+###############################################################################
+# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h.
+# Maximum EE supported number
+NFA_MAX_EE_SUPPORTED=0x01
+
+###############################################################################
+#Set the OffHost AID supported power state:
+OFFHOST_AID_ROUTE_PWR_STATE=0x3B
+
+###############################################################################
+# Vendor Specific Proprietary Protocol & Discovery Configuration
+# Set to 0xFF if unsupported
+#  byte[0] NCI_PROTOCOL_18092_ACTIVE
+#  byte[1] NCI_PROTOCOL_B_PRIME
+#  byte[2] NCI_PROTOCOL_DUAL
+#  byte[3] NCI_PROTOCOL_15693
+#  byte[4] NCI_PROTOCOL_KOVIO
+#  byte[5] NCI_PROTOCOL_MIFARE
+#  byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
+#  byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
+#  byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
+NFA_PROPRIETARY_CFG={05:FF:FF:06:81:80:70:FF:FF}
+
+###############################################################################