OpenAirInterface5G - SDR and Cloud based deployment

This tutorial is intended to setup all the OpenAirInterface5G components using the S1 interface, placing the core components in a cloud based system. The connection between OAI-UE and the OAI-eNB will be carried out by using USRP B210 SDR cards connected using wires and the selected cloud system where cloud components will be deployed will be OpenStack.

Hardware setup

The proposed deployment has been tested using the hardware showed in the following figure:

The attenuation between UE and eNB should be adjusted between 40 and 60 dB.

Core components deployment (HSS, MME and SP-GW).

The core components will be deployed in a cloud based system. In this tutorial, we are going to use OpenStack as a virtual machines manager. For this deployment we need three virtual machines, one per OpenAirCN componet with the following configuration:

Ubuntu 14.04 LTS (64-bits)
Install git
- sudo apt-get install git
Kernel setup: Install 4.7.x kernel from pre-compiled debian package
- git clone https://gitlab.eurecom.fr/oai/linux-4.7.x.git
- cd linux-4.7.x
- sudo dpkg -i linux-headers-4.7.7-oaiepc_4.7.7-oaiepc-10.00.Custom_amd64.deb linux-image-4.7.7-oaiepc_4.7.7-oaiepc-10.00.Custom_amd64.deb
Download the latest development branch of OpenAir-cn
- git clone https://gitlab.eurecom.fr/oai/openair-cn.git
- cd openair-cn/
- git checkout develop
- git fetch && git pull

Core Components Network Configuration

Once we have our virtual machines running, we have to configure all the network devices in order to allow the communication between them. We propose the following network configuration (OpenStack):

Setup communication between eNB and Cloud based Core Network

Before start configuring the core components, we have to setup a VPN between eNB, MME and SP-GW in order to allow IP level communication between them. In order to do so, we are going to setup an OpenVPN server in the eNB and generate certificates for both MME and SP-GW following this tutorial How To Set Up an OpenVPN Server on Ubuntu 14.04.

HSS Configuration and Building

Log into the HSS virtual machine and follow the instructions below:

sudo apt-get install mysql-server
cd ~/openair-cn/scripts/
./build_hss -i
Create folder for configuration files
- sudo mkdir -p /usr/local/etc/oai/freeDiameter
Copy Configuration files to the folder
- sudo cp ~/openair-cn/etc/hss.conf /usr/local/etc/oai
- sudo cp ~/openair-cn/etc/acl.conf ~/openair-cn/etc/hss_fd.conf /usr/local/etc/oai/freeDiameter
Set FQDN for the HSS by modifying /etc/hosts file
- 127.0.1.1 hss.openair4G.eur hss
Generate Certificates for HSS
- ./check_hss_s6a_certificate /usr/local/etc/oai/freeDiameter hss.openair4G.eur
Modify HSS configuration file /usr/local/etc/oai/hss.conf

HSS :
{
  ## MySQL mandatory options
  MYSQL_server = "127.0.0.1";
  MYSQL_user = "@MYSQL_user@";
  MYSQL_pass = "@MYSQL_pass@";
  MYSQL_db = "oai_db";

  -- HSS options
  OPERATOR_key = "1006020f0a478bf6b699f15c062e42b3"; # OP key for oai_db.sql
  RANDOM = "true";

  -- Freediameter options
  FD_conf = "/usr/local/etc/oai/freeDiameter/hss_fd.conf";
};

Modify freediameter configuration file /usr/local/etc/oai/freeDiameter/hss_fd.conf

  -- Identity and realm configured on /etc/hosts
  Identity = "hss.openair4G.eur";

  Realm = "openair4G.eur";

  -- Certificates
  TLS_Cred = "/usr/local/etc/oai/freeDiameter/hss.cert.pem", "/usr/local/etc/oai/
  freeDiameter/hss.key.pem";
  TLS_CA = "/usr/local/etc/oai/freeDiameter/hss.cacert.pem";

Load example database only in the first run
- sudo ./run_hss -i ~/openair-cn/src/oai_hss/db/oai_db.sql
Change "mmehost" field from mmeidentity table of oai_db database
- Option 1: Change it using phpMyAdmin
  - Edit row with "idmmeidentity" value equal to 4
  - Change "yang.openair4G.eur" to "mme.openair4G.eur"
- Option 2: Change it using mysql command line
  - mysql -u root -p
  - use oai_db
  - UPDATE mmeidentity SET mmehost = 'mme.openair4G.eur' WHERE idmmeidentity = 4;

MME Configuration and Building

The hostname of this machine must be its Identity, in our case "mme". We can change this identifier by modifying "/etc/hosts" and "/etc/hostsname". Then, restart the virtual machine. Log into the MME virtual machine and follow the instructions below:

cd ~/openair-cn/scripts/
sudo mkdir -p /usr/local/etc/oai/freeDiameter
./build_mme -i
sudo cp ~/openair-cn/etc/mme.conf /usr/local/etc/oai
sudo cp ~/openair-cn/etc/mme_fd.conf /usr/local/etc/oai/freeDiameter/
./check_mme_s6a_certificate /usr/local/etc/oai/freeDiameter/ mme.openair4G.eur
vim /usr/local/etc/oai/mme.conf

NETWORK_INTERFACES :
{
  # MME binded interface for S1-C or S1-MME communication (S1AP), can be ethernet interface, virtual ethernet interface
  MME_INTERFACE_NAME_FOR_S1_MME = "TUN_IFACE";               # YOUR NETWORK CONFIG HERE
  MME_IPV4_ADDRESS_FOR_S1_MME = "IP_ADDR_OF_TUN_IFACE";      # YOUR NETWORK CONFIG HERE

  # MME binded interface for S11 communication (GTPV2-C) 
  MME_INTERFACE_NAME_FOR_S11_MME = "eth2";               # YOUR NETWORK CONFIG HERE
  MME_IPV4_ADDRESS_FOR_S11_MME = "192.168.30.2/24";      # YOUR NETWORK CONFIG HERE
  MME_PORT_FOR_S11_MME = 2123;                           # YOUR NETWORK CONFIG HERE

};

S-GW :
{
  # S-GW binded interface for S11 communication (GTPV2-C), if none selected the ITTI message interface is used
  SGW_IPV4_ADDRESS_FOR_S11 = "192.168.30.3/24";           # YOUR NETWORK CONFIG HERE
};

Edit the configuration vim /usr/local/etc/oai/freeDiameter/mme_fd.conf

  # Identity of MME
  Identity = "mme.openair4G.eur";
  Realm = "openair4G.eur";

  # TLS configuration
  TLS_Cred = "/usr/local/etc/oai/freeDiameter/mme.cert.pem",
  "/usr/local/etc/oai/freeDiameter/mme.key.pem";
  TLS_CA = "/usr/local/etc/oai/freeDiameter/mme.cacert.pem";

  # HSS information
  ConnectPeer= "hss.openair4G.eur" { ConnectTo = "192.168.40.3"; No_SCTP ; No_IPv6;
  Prefer_TCP; No_TLS; port = 3868; realm = "openair4G.eur";};

The MME setup is finished.
Run the MME by running the script ./run_mme in ~/openair-cn/scripts/

SP-GW Configuration and Building

cd ~/openair-cn/scripts/
sudo mkdir -p /usr/local/etc/oai/freeDiameter
./build_spgw -i
sudo vim /etc/hosts

127.0.1.1    sgpw.openair4G.eur spgw

sudo cp ~/openair-cn/etc/spgw.conf /usr/local/etc/oai/
sudo vim /usr/local/etc/oai/spgw.conf

S-GW :
{
 NETWORK_INTERFACES :
 {
  # S-GW binded interface for S11 communication (GTPV2-C)
  SGW_INTERFACE_NAME_FOR_S11 = "eth2";             # YOUR NETWORK CONFIG HERE
  SGW_IPV4_ADDRESS_FOR_S11 = "192.168.30.3/24";    # YOUR NETWORK CONFIG HERE

  # S-GW binded interface for S1-U communication (GTPV1-U) can be ethernet interface, virtual ethernet
  SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP = "eth1";
  SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP = "192.168.20.10/24";

  SGW_IPV4_PORT_FOR_S1U_S12_S4_UP = 2152; 
  
  # S-GW binded interface for S5 or S8 communication, not implemented, so leave it to none 
  SGW_INTERFACE_NAME_FOR_S5_S8_UP = "none";       # STRING, interface name, DO NOT CHANGE (NOT IMPLEMENTED YET)
  SGW_IPV4_ADDRESS_FOR_S5_S8_UP = "0.0.0.0/24";   # STRING, CIDR, DO NOT CHANGE (NOT IMPLEMENTED YET)
};

P-GW =
{
 NETWORK_INTERFACES :
 {
  # P-GW binded interface for S5 or S8 communication, not implemented, so leave it to none
  PGW_INTERFACE_NAME_FOR_S5_S8 = "none"; # STRING, interface name, DO NOT CHANGE (NOT IMPLEMENTED YET)

  # P-GW binded interface for SGI (egress/ingress internet traffic)
  PGW_INTERFACE_NAME_FOR_SGI = "eth0";  # STRING, YOUR NETWORK CONFIG HERE
  PGW_MASQUERADE_SGI = "yes";           # STRING, {"yes","no"}. YOUR NETWORK CONFIG HERE, will do NAT for you if you put "yes".
  UE_TCP_MSS_CLAMPING = "no";           # STRING, {"yes","no"}.
};

Build the SPGW using the command ./build_spgw in ~/openair-cn/scripts/

In case the build failed (NETTLE VERSION missing), run first the command ./build_mme -i as in the MME setup

After successful build, run the SPGW with the command ./run_spgw

Kernel requirements for eNB and UE

Low-latency kernel installation

To install the low-latency kernel 3.19 on top of Ubuntu 14.04, 64-bit architecture type

sudo apt-get install linux-image-3.19.0-61-lowlatency linux-headers-3.19.0-61-lowlatency

Power management

Remove all power management features in the BIOS (sleep states, in particular C-states) and CPU frequency scaling (Intel SpeedStep). In some cases, you can also do this with cpufreqtool. Also, disable hyperthreading in BIOS and make sure its turned off in Linux

Disable CPU frequency scaling
Disable p-state and c-state in linux
- sudo vim /etc/default/grub
```
GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_pstate=disable"
```
- sudo update-grub
Append "blacklist intel_powerclamp" to the end of /etc/modprobe.d/blacklist.conf, to blacklist the intel_powerclamp" module. If the file does not exist, create one, and add the line into it.
You also need to disable hyperthreading, CPU frequency control, C-States, P-States and any other power management from BIOS as well.

OAI eNB deployment

Build eNB

Build the eNB supporting USRP B210

git clone https://gitlab.eurecom.fr/oai/openairinterface5g.git
cd ~/openairinterface5g
source oaienv - It sets the environment variables with the needed values
cd cmake_targets
./build_oai -I -w USRP --eNB - The "-I" option is needed only once, then you can build without this option

This should starts the building process in ~/openairinterface5g/cmake_targets/lte_build_oai.

eNB configuration to Access OpenStack-Based core network

Now, we have to specify how the core components could be accessed by the eNB. Remember that we are going to use a VPN to provide IP level connectivity between the eNB and the core components located at the eNB. It is important to take into account that core components must be able to reach the eNB, because it will act as VPN server as we mentioned before.

Let's modify the configuration file that will be used when running the eNB in order to allow it to reach the core components.

Modify the eNB's configuration file
- vim ~/openairinterface5g/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf

////////// MME parameters:
mme_ip_address      = ( { ipv4       = "VPN_MME_IP";
                          ipv6       = "192:168:30::17";
                          active     = "yes";
                          preference = "ipv4";
                        }
                      );

NETWORK_INTERFACES :
{
    ENB_INTERFACE_NAME_FOR_S1_MME            = "TUN_IFACE";
    ENB_IPV4_ADDRESS_FOR_S1_MME              = "TUN_IFACE_IP/NETMASK";

    ENB_INTERFACE_NAME_FOR_S1U               = "TUN_IFACE";
    ENB_IPV4_ADDRESS_FOR_S1U                 = "TUN_IFACE_IP/NETMASK";
    ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
};

This configuration file contains all the different parameters of the eNB such as number of resource blocks that will be used, band, rx/tx gain, etc. In case you want to run the eNB with other configuration, refer to this file.

OAI UE deployment

Build UE

Build the UE supporting USRP B210

cd ~/openairinterface5g
source oaienv - It sets the environment variables with the needed values
cd cmake_targets
./build_oai -I -w USRP --UE - The "-I" option is needed only once, then you can build without this option

This should starts the building process in ~/openairinterface5g/cmake_targets/lte_build_oai.

Running all the components

Running Core components

HSS
- cd ~/openair-cn/SCRIPTS
- ./run_hss
MME
- cd ~/openair-cn/SCRIPTS
- ./run_mme - once started, we should see in the HSS log a "MME status changed to active" message
SP-GW
- cd ~/openair-cn/SCRIPTS
- ./run_spgw

Running eNB

cd ~/openairinterface5g/
source oaienv
cd cmake_targets
sudo -E ./lte_build_oai/build/lte-softmodem -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf

After a few seconds, we can see a "Associated MME 1" message in the eNB log and finally the eNB starts waiting for connections showing two "got sync" messages.

Running UE

This is the more sensitive part because depending on the attenuation that we have in our wires, we have to adjust the rx/tx gain to get the UE connected to the eNB. In our deployment, we have 45 dB attenuation per wire. Before run the UE, we have to install the ue_ip.ko kernel module in order to bring up the OIP interface, oip0, that will be configured with the IP received from the SP-GW through the MME. In order to do so, we have to insert the ue_ip.ko module provided by OpenAirInterface5g.

cd ~/openairinterface5g/
source oaienv
sudo insmod $OPENAIR_TARGETS/bin/ue_ip.ko

Now, run the UE

cd ~/openairinterface5g/
source oaienv
cd cmake_targets/lte_build_oai/build
sudo -E ./lte-softmodem -U -C2660000000 -r25 --ue-scan-carrier --ue-txgain 85 --ue-rxgain 100

After that, check that you have an IP address in one of the oip interfaces created by the ue_ip.ko module (usually oip1).

Check ip routes

When all the componets are well connected, we need to check the routes that we have along the path to reach internet (UE physical machine, eNB physical machine and SP-GW virtual machine) in order to allow the UE to reach the internet through the already deployed architecture.

Using simulated UE

The UE can be simulated if there is absence of hardware.
The tutorial must be executed until the OAI UE deployment part.
Re-configuration in the eNB, MME and eNB is required.

eNB + MME configuration

TAI parameters in the MME and eNB should be the same.
In the eNB simulation configuration file (on the eNB machine)
~/OPENAIR_DIR/target/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_mme.conf
the TAI list should have these parameteres set:

tracking_area_code  =  "1";
mobile_country_code =  "208";
mobile_network_code =  "93";

In the MME configuration file (on the MME machine)
/usr/local/etc/oai/mme.conf
they are set as:

 TAI_LIST = (
         {MCC="208" ; MNC="93";  TAC = "1"; }                                 # YOUR TAI CONFIG HERE
    );

eNB + HSS configuration

The IMSI, the key and mmeidentity_idmmeidentity of the UE have to be correctly recorded in the HSS database.
In the eNB (machine), the value of the key is taken from the USIM configuration header file:
vim ~/OPENAIR_DIR/openair3/NAS/UE/API/USIM/usim_api.h
at the begining:

/*
 * Subscriber authentication security key
 */
#define USIM_API_K_SIZE         16
#define USIM_API_K_VALUE        "fec86ba6eb707ed08905757b1bb44b8f"

The USIM_API_K_VALUE is updated in the users table of the HSS database.
This is done using phpMyAdmin or using mysql cli (command line interface).
On the HSS (machine) in the users table:

Option 1: Change it using phpMyAdmin
- Edit row with imsi value equal to 208930100001111
- Change its key column with the USIM_API_K_VALUE as x'fec86ba6eb707ed08905757b1bb44b8f'
Option 2: Change it using mysql command line
- mysql -u root -p
- use oai_db
- UPDATE users SET users.key= x'fec86ba6eb707ed08905757b1bb44b8f' WHERE imsi = 208930100001111;

Run the simulation

Run the simulation sequentially: SPGW ➡️ HSS ➡️ MME ➡️ (eNB + UE)

SPGW:
- cd ~/openair-cn/SCRIPTS
- ./run_spgw
HSS:
- cd ~/openair-cn/SCRIPTS
- ./run_hss
MME:
- cd ~/openair-cn/SCRIPTS
- ./run_mme
eNB + UE:
- cd ~/openairinterface5g/cmake_targets/tools
- sudo -E ./run_enb_ue_virt_s1

Authors

Ginés García Avilés website

Carlos Donato Morales website

Kiril Antevski website

Name		Name	Last commit message	Last commit date
Latest commit History 40 Commits
README.md		README.md
hw_configuration.PNG		hw_configuration.PNG
oai-cn_network_config.PNG		oai-cn_network_config.PNG

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

OpenAirInterface5G - SDR and Cloud based deployment

Hardware setup

Core components deployment (HSS, MME and SP-GW).

Core Components Network Configuration

Setup communication between eNB and Cloud based Core Network

HSS Configuration and Building

MME Configuration and Building

SP-GW Configuration and Building

Kernel requirements for eNB and UE

Low-latency kernel installation

Power management

OAI eNB deployment

Build eNB

eNB configuration to Access OpenStack-Based core network

OAI UE deployment

Build UE

Running all the components

Running Core components

Running eNB

Running UE

Check ip routes

Using simulated UE

eNB + MME configuration

eNB + HSS configuration

Run the simulation

Authors

Acknowledgments

About

Releases

Packages

BelmY/OpenAirInterface5G_CloudCore

Folders and files

Latest commit

History

Repository files navigation

OpenAirInterface5G - SDR and Cloud based deployment

Hardware setup

Core components deployment (HSS, MME and SP-GW).

Core Components Network Configuration

Setup communication between eNB and Cloud based Core Network

HSS Configuration and Building

MME Configuration and Building

SP-GW Configuration and Building

Kernel requirements for eNB and UE

Low-latency kernel installation

Power management

OAI eNB deployment

Build eNB

eNB configuration to Access OpenStack-Based core network

OAI UE deployment

Build UE

Running all the components

Running Core components

Running eNB

Running UE

Check ip routes

Using simulated UE

eNB + MME configuration

eNB + HSS configuration

Run the simulation

Authors

Acknowledgments

About

Resources

Stars

Watchers

Forks

Releases

Packages 0

Packages