Perspectives for emacs, based on
the perspective-el
by Natalie Weizenbaum.
But perspectives are shared among frames + ability to save/restore its state
from/to a file.
The persp-mode is available from
the MELPA.
So if you use this repo then the installation is easy:
M-x: package-install RET persp-mode RET
Alternatively you can download the persp-mode.el
from github
and install it as a package:
M-x: package-install-file RET 'path_to_where_you_saved_persp-mode.el' RET
Another(oldschool) way:
Place the persp-mode.el file somewhere in the emacs' load-path and add
(require 'persp-mode) (persp-mode 1) to your configuration file.
If you use the workgroups.el
(note that workgroups sometimes do a better job restoring window configurations
than standard emacs mechanism)
it is a good idea to switch off the restore windows animation.
(it's clashing with the
golden-ratio-mode for example,
sometimes erring when creating new frames and it is slow on remote network
connections.)
You can do it with: (setq wg-morph-on nil).
If you want buffers to be killed after they were removed from perspectives,
see the persp-autokill-buffer-on-remove variable.
(with-eval-after-load "persp-mode-autoloads"
(setq wg-morph-on nil) ;; switch off animation
(setq persp-autokill-buffer-on-remove 'kill-weak)
(add-hook 'window-setup-hook #'(lambda () (persp-mode 1))))
(with-eval-after-load "persp-mode"
(setq wg-morph-on nil)
(setq persp-autokill-buffer-on-remove 'kill-weak)
(add-hook 'window-setup-hook #'(lambda () (persp-mode 1))))
(require 'persp-mode)
If you run emacs <= 24.3 the macro with-eval-after-load is not defined.
Here is the definition:
(unless (fboundp 'with-eval-after-load)
(defmacro with-eval-after-load (file &rest body)
(declare (indent 1) (debug t))
`(eval-after-load ,file '(progn ,@body))))
Ability to save/restore window configurations from/to a file for emacs < 24.4
depends on the workgroups.el
which also available from MELPA.
n -- next perspective.
p -- previous perspective.
s -- create/switch to perspective.
S -- create/switch to perspective in a window.
r -- rename perspective.
c -- copy perspective.
C -- kill perspective(killing the 'nil' perspective will kill all buffers).
With prefix argument will not kill perspective's buffers.
a -- add buffer to perspective.
With prefix argument reverses the effect of the persp-switch-to-added-buffer.
b -- switch to buffer in perspective.
t -- switch to buffer without adding it to perspective. With prefix argument
allows to remove a buffer from perspective without killing and switching to
another buffer.
i -- import buffers from perspective.
I -- import window configuration from perspecive.
k -- remove buffer from perspective.
With prefix argument reverses the effect of the persp-autokill-buffer-on-remove.
K -- kill buffer.
w -- save perspectives to file.
W -- save perspectives subset to file.
l -- load perspectives from file.
L -- load perspectives subset from file.
o -- switch off persp-mode (you can quickly switch off persp-mode after emacs
start and before autoresuming previous perspectives state if you only need to
edit a single file).
These key sequences must follow the persp-keymap-prefix which you can
customize (by default it is C-c p), so if you want to invoke the < s -
create/switch perspective > command you must first type the prefix(C-c p) and
then s (full sequence is C-c p s).
If you want to bind a new key for persp-mode, use persp-key-map:
(define-key persp-key-map (kbd ...) ...).
If you kill a buffer with C-x k(kill-buffer command) it will be killed only if
it belongs to a single perspective, otherwise it'll be only removed from the
current perspective and not killed.
But if you kill a buffer from the 'none'(nil) perspective -- it will be removed
from all perspectives and then killed.
M-x: customize-group RET persp-mode RET
Suppose you want to save the *ielm*(M-x ielm RET -- elisp repl) buffers.
Then the save function would be:
(lambda (b)
(with-current-buffer b
(when (string= major-mode "inferior-emacs-lisp-mode")
`(def-ielm-buffer ,(buffer-name) ,default-directory))))
You must prepend that function to the persp-save-buffer-functions list
(before the standard filtering functions because it filters buffers starting
with the '*').
The load function:
(lambda (savelist)
(when (eq (car savelist) 'def-ielm-buffer)
(with-current-buffer (get-buffer-create (cadr savelist))
(setq default-directory (caddr savelist))
(require 'ielm)
(inferior-emacs-lisp-mode))))
Add load function to the persp-load-buffer-functions list.
That's it. Now the persp-mode can save and restore ielm buffers.
Python shell example:
gist
Also you can use the persp-def-buffer-save/load:
;; eshell
(persp-def-buffer-save/load
:mode 'eshell-mode :tag-symbol 'def-eshell-buffer
:save-vars '(major-mode default-directory))
;; compile
(persp-def-buffer-save/load
:mode 'compilation-mode :tag-symbol 'def-compilation-buffer
:save-vars '(major-mode default-directory compilation-directory
compilation-environment compilation-arguments))
;; magit-status
(with-eval-after-load "magit-autoloads"
(autoload 'magit-status-mode "magit")
(autoload 'magit-refresh "magit")
(persp-def-buffer-save/load
:mode 'magit-status-mode :tag-symbol 'def-magit-status-buffer
:save-vars '(major-mode default-directory)
:after-load-function #'(lambda (b &rest _)
(with-current-buffer b (magit-refresh)))))
Some time ago there were switch-to-buffer and display-buffer advices in the persp-mode. If you still need them, I can suggest you a way:
(with-eval-after-load "persp-mode"
(defvar after-switch-to-buffer-functions nil)
(defvar after-display-buffer-functions nil)
(if (fboundp 'advice-add)
;;Modern way
(progn
(defun after-switch-to-buffer-adv (&rest r)
(apply #'run-hook-with-args 'after-switch-to-buffer-functions r))
(defun after-display-buffer-adv (&rest r)
(apply #'run-hook-with-args 'after-display-buffer-functions r))
(advice-add #'switch-to-buffer :after #'after-switch-to-buffer-adv)
(advice-add #'display-buffer :after #'after-display-buffer-adv))
;;Old way
(defadvice switch-to-buffer (after after-switch-to-buffer-adv)
(run-hook-with-args 'after-switch-to-buffer-functions (ad-get-arg 0)))
(defadvice display-buffer (after after-display-buffer-adv)
(run-hook-with-args 'after-display-buffer-functions (ad-get-arg 0)))
(ad-enable-advice #'switch-to-buffer 'after 'after-switch-to-buffer-adv)
(ad-enable-advice #'display-buffer 'after 'after-display-buffer-adv)
(ad-activate #'switch-to-buffer)
(ad-activate #'display-buffer)))
After that you can add functions to after-switch-to-buffer-functions and
after-display-buffer-functions:
(add-hook 'after-switch-to-buffer-functions
#'(lambda (bn) (when (and persp-mode
(not persp-temporarily-display-buffer))
(persp-add-buffer bn))))
Buffers end up in a perspective after you manually add them or more often
automatically when find-file-hook fires. This works well for buffers that
visit a file, but not every buffer does. E.g. buffers created by Dired won't
trigger find-file-hook and won't be added to current perspective. If you
discover that some buffers you'd expect are missing you may be able to get the
desired behavior by effecting after-change-major-mode-hook:
;; see documentation for other possible values
(setq persp-add-buffer-on-after-change-major-mode t)
;; above setting will not discriminate and bring ephemeral buffers e.g.
;; *magit* which you probably don't want. You can filter them out.
(add-hook 'persp-common-buffer-filter-functions
;; there is also `persp-add-buffer-on-after-change-major-mode-filter-functions'
#'(lambda (b) (string-prefix-p "*" (buffer-name b))))
You can now define an auto perspective using the persp-def-auto-persp function.
This kind of perspective is intended to be dynamically created/destroyed/hided/unhided
when a specific kind of buffers appears/disappears.
The argument list of the persp-def-auto-persp:
The first argument is a string which will serve as a name for the auto perspective.
Other arguments is a key - value pairs:
:buffer-name -- regexp to match against a name of a buffer.
:file-name -- regexp to match against a filename of the buffer.
:mode -- symbol to compare with the major-mode of the buffer.
:mode-name -- regexp to compare against mode-name of the buffer.
:minor-mode -- check if a minor mode is active for the buffer.
:minor-mode-name -- check if minor mode with name matching this regexp is
active for the buffer.
:predicate -- function to check if the buffer is a good one(return nil if not).
:hooks -- a list of hooks (or symbol) to which you want to add checks.
persp-def-auto-persp tries to be smart about hooks to which it'll add checks
, but sometimes you need more control.
:dyn-env -- the list of variables and values to dynamically bind when the
checks and action takes place.
The format is the same as in the let form.
:get-name -- function to get a perspecive name.
:get-buffer -- function to get the buffer.
:get-persp -- function to get the perspective.
:switch -- how to switch to the auto perspective: nil -- do not switch,
'window -- switch in window, 'frame -- switch for frame.
:parameters -- list of parameters for perspective(see the
modify-persp-parameters function).
:noauto -- if non nil then do not set the auto field of the perspective.
:on-match -- function to run when the buffer passed all checks, instead of
standard actions(create/get perspective, add buffer to it).
:after-match -- function to run after the buffer has passed all checks and
standard or custom action finished their work.
All function parameters must accept a single argument -- the current state and
must return a new state(which can be the old state). Where the state is
the association list which initially contains all key-value arguments that were
passed to the persp-def-auto-persp. The standard :get-name puts
'persp-name cell to the state, the standard get-buffer puts 'buffer,
standard :get-persp adds 'persp.
However the :predicate function parameter is different -- it must accept a
buffer as the first argument and the state as the second argument and the
state argument is optional. If the state argument is non nil then the
predicate must return a new state if the buffer satisfies that predicate. If the
state argument is nil then it can return anything non nil if the buffer
satisfies the predicate. If the buffer is not satisfies the predicate it must
return nil regardless of the state argument.
Only the name string(first argument) is required. All other arguments may be omitted or combined in any way you like.
The persp-def-auto-persp function creates an auto persp definition and adds it
to the persp-auto-persp-alist. If a definition with same name already exists
it will be replaced. If you want to delete a definition pass t as the
:delete parameter.
Unless you pass t as the :dont-pick-up-buffers argument all existing buffers
will be checked against the new auto persp definition.
Example of usage:
(with-eval-after-load "persp-mode-autoload"
(with-eval-after-load "dired"
(persp-def-auto-persp "dired"
:parameters '((dont-save-to-file . t))
:mode 'dired-mode
:dyn-env '(after-switch-to-buffer-functions ;; prevent recursion
(persp-add-buffer-on-find-file nil)
persp-add-buffer-on-after-change-major-mode)
:hooks '(after-switch-to-buffer-functions)
:switch 'window)))
See the persp-hook-up-emacs-buffer-completion variable if you want the
persp-mode to try to restrict buffer lists completion for emacs commands commands.
Also you can bind persp-switch-to-buffer and persp-kill-buffer to default keys:
(with-eval-after-load "persp-mode"
(global-set-key (kbd "C-x b") #'persp-switch-to-buffer)
(global-set-key (kbd "C-x k") #'persp-kill-buffer))
or
(with-eval-after-load "persp-mode"
(substitute-key-definition #'switch-to-buffer #'persp-switch-to-buffer global-map)
(substitute-key-definition #'kill-buffer #'persp-kill-buffer global-map))
This must work for most buffer listing commands that internally use the
buffer-list function, just wrap 'your function' with the with-persp-buffer-list:
(with-persp-buffer-list () (your-function))
There is also with-persp-read-buffer macro.
(global-set-key (kbd "C-x b") #'(lambda (arg)
(interactive "P")
(with-persp-buffer-list () (bs-show arg))))
(global-set-key (kbd "C-x b") #'(lambda (arg)
(interactive "P")
(with-persp-buffer-list () (ibuffer arg))))
And here is something ibuffer-specific: gist.
M-x customize-variable RET persp-set-ido-hooks RET
There is also the with-persp-ido-hooks macro.
You can set the persp-interactive-completion-function:
(with-eval-after-load "persp-mode"
(setq persp-interactive-completion-function #'ido-completing-read))
or just use the ido-ubiquitous-mode.
gist.
gist.
(Note that helm-buffer-list, helm-mini are using ido's
ido-make-buffer-list internally).
Buffer filtering support: gist#1, gist#2.
Also, you can take a look at Spacemacs
, and especially this.
persp-mode-projectile-bridge.el.
gist.
(add-to-list 'speedbar-frame-parameters (cons 'persp-ignore-wconf t))
Changing the order of the perspectives(how it looks when you are prompted for a perspective name(s)):
See the C-h v persp-names-cache RET.
You can manually edit the order of the perspectives by editing the
persp-names-cache variable using
edit-list or
refine packages.
If you often launch emacs to edit a single file and you don't want to wait the persp-mode resuming process(and don't want to use the emacs daemon) -- you can create a script like that:
#!/bin/bash
emacs --eval '(setq persp-auto-resume-time -1.0 persp-auto-save-opt 0)' $@;
call it editor.sh, save somewhere in the $PATH, and add
export EDITOR="editor.sh" to your .bashrc.
Or add
(add-to-list 'command-switch-alist
(cons "persp-q"
#'(lambda (p)
(setq persp-auto-resume-time -1
persp-auto-save-opt 0))))
To your emacs config. Then the editor.sh would be:
#!/bin/bash
emacs -persp-q $@;
If you updated or changed something or simply something goes wrong don't warry to lose/overwrite perspectives' state, remember that the persp-mode makes backups in `persp-save-dir' for you(3 previous states by default).
When you create a new frame(with emacsclient -c for example) the selected
window of the created frame is switching to the *scratch* buffer. This
behaviour is fixed in the emacs version >= 24.4(and in current emacs trunk).
Alternatively you can save the server.el from
/usr/share/emacs/${your_emacs_version_number}/lisp/ (or from source tree, or
from somewhere else) to a directory in your load-path and edit it like that
(this works for emacs 24.3 at least):
replace
(unless (or files commands)
(if (stringp initial-buffer-choice)
(find-file initial-buffer-choice)
(switch-to-buffer (get-buffer-create "*scratch*")
'norecord)))
by
(unless (or files commands)
(let ((buf
(cond ((stringp initial-buffer-choice)
(find-file-noselect initial-buffer-choice))
((functionp initial-buffer-choice)
(funcall initial-buffer-choice)))))
(switch-to-buffer
(if (buffer-live-p buf) buf (get-buffer-create "*scratch*"))
'norecord)))
and set the persp-is-ibc-as-f-supported variable to t.
