1.2.5

Release Note

Updated on 11/11/2024

⭐ Make sure to set the PPPoE username/password to ppp for the feature below to work and for the web to run properly

• Add GoldHEN detection to avoid reloading the jailbreak after waking from the rest mode/when the Luckfox reboot
• Add pre-installed pppwn build image, basically you only need to flash the images respectively with your PS4 version, no installation, no setup, hassle-free
• [Web] Add "Restore Default Setting" button to reset config.json to the original settings, and use to restore the config.json file back in case data is corrupted/missing

⚠️ MUST READ ⚠️

⭐ For the build image with non Web Server:

• Download one of the pre-build images below then flash it to your Luckfox. For example, you have Luckfox Pico Plus, and your PS4 version 11.00, download pppwn_luckfox_v1.2.5_pico_plus_image_FW_11.00.7z. After you successfully flash it the PPPwn will automatically perform the jailbreak at boot

⭐ For the build image with Web Server:

• Download one of this according your luckfox model
  pppwn_luckfox_v1.2.5_pro_max_image_web_FW_9.00-11.00.7z
pppwn_luckfox_v1.2.5_pico_plus_image_web_FW_9.00-11.00.7z

• The first time after you flash the pre-build pppwn web image, you need to open the web config, select your PS4 version and pppwn type then run the exploit manually from the web

• The auto-run PPPwn on boot changed to OFF by default, if you want to auto jailbreak at the start go to the config page again and tick the auto-run PPPwn to ON

Full Changelog: 1.2.4_1.1.2...1.2.5

1.2.4 - 1.1.2

Release Note

• Add Support FW 10.50, 10.70, 10.71 for GoldHEN v2.4b18 (thanks to @SiSTR0 and everyone involved!)
• Add Support for Luckfox Pico Ultra/Ultra W (network bridge with Ultra W does not support)
• Add new GoldHEN v2.4b18 payload
• Fixed minor bugs

Note on PPPwn-Luckfox version:

• PPPwn-Luckfox v1.1.2 : No Web Server, please use _image_minimal_.zip
• PPPwn-Luckfox v1.2.4 : With Web Server, please use _image_web_.zip

Next PPPwn-Luckfox version:

• Rest Mode/GoldHEN detection to avoid crash
• Pre-installed pppwn build image, basically you only need to flash the images, no install, no setup, hassle-free

Full Changelog: 1.2.3_1.1.1...1.2.4_1.1.2

1.2.3 - 1.1.1

Release Note

I think it's necessary, so I'll do a proper release for both versions 1.2.3 & 1.1.1

• Reduce the problem where the PS4 does not shut down properly
• Reduce crash when trying to jailbreak or shutdown
• Improve Stability
• Add stage2 for FW 10.50, 10.70, 10.71

Note on custom buildroot image:

• For v1.1.1 please use _image_minimal_.zip
• For v1.2.3 please use _image_web_.zip

Note on PPPwn-Luckfox version:

• PPPwn-Luckfox v1.1.1 : No Web Server
• PPPwn-Luckfox v1.2.3 : With Web Server

This is not 100% fixed the issue as it still happened at some point if the jailbreak took too long. There's a chance of a bug on GoldHEN or the PPPwn.

Full Changelog: 1.2.2...1.2.3_1.1.1

1.2.2

New features

• Added Linux Payloads for 9.00 and 11.00 merged from @harsha-0110 in #49 by @ps4boot @EchoStretch and PSXIta Team
• Reduce crash when trying to turn off (if it's still happening try to unplug the Luckfox power or disable internet in PS4's settings then turn the PS4 off)
• Added SD boot buildroot support for Luckfox Pico and Luckfox Pico Mini A
• Update buildroot image to free more RAM space for better performance, check more info at #47 (comment)
• Add Disable Eth0 button (to free LAN port and keep the Luckfox on)

Recommended Version

• If you just want the Luckfox to jailbreak your PS4 and nothing else, please use v1.1.0 from the release pages, and follow the same procedure installation. It is more stable than v1.2.X and has fewer crashes.

Full Changelog: 1.2.1...1.2.2

1.2.1

Hot fix v1.2.1

• Fixed .sh script with Unix (LF) ending line problem
• Fixed some questions and texts

1.2.0

Add Web Server Features on NAND

Thanks to @harsha-0110 for the webserver base scripts and PHP.

You can access it at 192.168.1.1 on your PS4 browser. It allows you to:

• Change your PPPwn settings
• Shutdown your Luckfox device
• Execute PPPwn
• Inject payloads (make sure to enable BinLoader in GoldHEN)
• Turned on/off auto-run on boot (on by default)

You can manually edit the configuration file located at /etc/pppwn/config.json.
Custom buildroot image and PPPwn files can be downloaded here.
Any bugs you found please open the Issue and report!

Full Changelog: 1.1.0...1.2.0

1.1.0

New features

• Add NAND flash installation so you don't need an SD Card anymore
• Significantly improves the boot time of Luckfox faster, and higher success rate
• Update the SD installation method, without needing a router and internet to set up.
• Other minor tweak

Enjoy ;)

Updated on 23/08/2024

• Add custom buildroot images
• Improve the scripts and stability

Note:

This is the most stable version of PPPwn-Luckfox aside from the web server version which is still being worked on to reduce crash, hang, and KP.

Full Changelog: 1.0.3...1.1.0

1.0.3

• You can now choose if you want your Luckfox to shut down or not after the successful jailbreak
• You can now select which executable of pppwn you want to use. if the new pppwn ipv6 is not stable for you, you can select the previous version of pppwn. This depends on your PS4 so try yourself out to see which version works best for you. For the cursed PS4 please use pppwn ipv6
• Added update.sh to update PPPwn-Luckfox to the latest version:
• Some other minor change

Full Changelog: 1.0.2...1.0.3

1.0.2

• update pppwn C++ with IPV6 fix to support all PS4 models
• remove VTX HEN

Full Changelog: 1.0.1...1.0.2

1.0.1

• add support for FW 9.60
• update GoldHENv2.4b17.3