Remove print debugging. #350
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ### | |
| # Initially copied from | |
| # https://github.com/actions/starter-workflows/blob/main/ci/python-package.yml | |
| # And later based on the version I (jamadden) updated at gevent/gevent | |
| # | |
| # Original comment follows. | |
| ### | |
| ### | |
| # This workflow will install Python dependencies, run tests and lint with a variety of Python versions | |
| # For more information see: https://help.github.com/actions/language-and-framework-guides/using-python-with-github-actions | |
| ### | |
| ### | |
| # Important notes on GitHub actions: | |
| # | |
| # - We only get 2,000 free minutes a month (private repos) | |
| # - We only get 500MB of artifact storage | |
| # - Cache storage is limited to 7 days and 5GB. | |
| # - macOS minutes are 10x as expensive as Linux minutes | |
| # - windows minutes are twice as expensive. | |
| # | |
| # So keep those workflows light. | |
| # | |
| # In December 2020, github only supports x86/64. If we wanted to test | |
| # on other architectures, we can use docker emulation, but there's no | |
| # native support. | |
| # | |
| # Another major downside: You can't just re-run the job for one part | |
| # of the matrix. So if there's a transient test failure that hit, say, 3.8, | |
| # to get a clean run every version of Python runs again. That's bad. | |
| # https://github.community/t/ability-to-rerun-just-a-single-job-in-a-workflow/17234/65 | |
| name: tests | |
| # Triggers the workflow on push or pull request events | |
| on: [push, pull_request] | |
| # Limiting to particular branches might be helpful to conserve minutes. | |
| #on: | |
| # push: | |
| # branches: [ $default-branch ] | |
| # pull_request: | |
| # branches: [ $default-branch ] | |
| env: | |
| # Weirdly, this has to be a top-level key, not ``defaults.env`` | |
| PYTHONHASHSEED: 8675309 | |
| PYTHONUNBUFFERED: 1 | |
| PYTHONDONTWRITEBYTECODE: 1 | |
| # PYTHONDEVMODE leads to crashes in pylibmc. | |
| # See https://github.com/lericson/pylibmc/issues/254 | |
| # - PYTHONDEVMODE=1 | |
| PYTHONFAULTHANDLER: 1 | |
| PIP_UPGRADE_STRATEGY: eager | |
| # Don't get warnings about Python 2 support being deprecated. We | |
| # know. The env var works for pip 20. | |
| PIP_NO_PYTHON_VERSION_WARNING: 1 | |
| PIP_NO_WARN_SCRIPT_LOCATION: 1 | |
| # Disable some warnings produced by libev especially and also some Cython generated code. | |
| # These are shared between GCC and clang so it must be a minimal set. | |
| # TODO: Figure out how to set env vars per platform without resorting to inline scripting. | |
| CFLAGS: -Ofast -pipe | |
| CXXFLAGS: -Ofast -pipe | |
| # Uploading built wheels for releases. | |
| # TWINE_PASSWORD is encrypted and stored directly in the | |
| # travis repo settings. | |
| TWINE_USERNAME: __token__ | |
| ### | |
| # caching | |
| ### | |
| CCACHE_DIR: ~/.ccache | |
| CC: "ccache gcc" | |
| CCACHE_NOCPP2: true | |
| CCACHE_SLOPPINESS: file_macro,time_macros,include_file_ctime,include_file_mtime | |
| CCACHE_NOHASHDIR: true | |
| # | |
| jobs: | |
| test: | |
| runs-on: ${{ matrix.os }} | |
| strategy: | |
| matrix: | |
| # 3.12.1 breaks zope.testrunner. | |
| # See https://github.com/zopefoundation/zope.testrunner/issues/157 | |
| python-version: | |
| - '3.9' | |
| - '3.10' | |
| - '3.11' | |
| - "3.12" | |
| - "3.13" | |
| - "pypy-3.10-v7.3.17" | |
| os: [ubuntu-latest, macos-latest] | |
| exclude: | |
| # Can't build persistent on 3.12 with -UNDEBUG because it | |
| # accesses fields of objects that aren't there in assert statements; | |
| # we build linux with assertions enabled, and unless there is a 3.12 | |
| # persistent wheel, we have to exclude that one. | |
| # The same thing goes for PyPy. | |
| - os: ubuntu-latest | |
| python-version: "pypy-3.10-v7.3.17" | |
| steps: | |
| - name: checkout | |
| uses: actions/checkout@v4 | |
| - name: Set up Python ${{ matrix.python-version }} | |
| uses: actions/setup-python@v5 | |
| with: | |
| python-version: ${{ matrix.python-version }} | |
| cache: 'pip' | |
| cache-dependency-path: setup.py | |
| - name: Install ccache, configure CFLAGS (ubuntu) | |
| uses: ./.github/actions/config-cc | |
| - name: Install native libs | |
| uses: ./.github/actions/install-native-libs | |
| - name: Install Build Dependencies | |
| run: | | |
| pip install -U pip | |
| pip install -U -q setuptools wheel twine | |
| pip install -q -U 'cython>=3.0' | |
| pip install -U coverage | |
| pip install -U cffi | |
| - name: Build mysqlclient | |
| # Ubuntu 20 doesn't have libmysqlclient.20, but mysqlclient | |
| # client binaries on PyPI are linked against that. We can install that, | |
| # but then SSL breaks for an unknown reason, and we can't disable SSL | |
| # because authentication requires it (maybe we could change the authentiaction plugin?) | |
| # So instead we install the development sources and compile mysqlclient locally. | |
| # The relevant package, libmysqlclient-dev, is already installed. | |
| if: startsWith( matrix.os, 'ubuntu-20') | |
| run: | | |
| pip install --no-binary :all: mysqlclient | |
| - name: Install RelStorage (non-Mac) | |
| if: ${{ ! startsWith(runner.os, 'Mac') }} | |
| run: | | |
| python setup.py bdist_wheel | |
| WHL=$(ls dist/*whl) | |
| python -m pip install -U "$WHL[test,docs,all_tested_drivers]" | |
| env: | |
| # Ensure we test with assertions enabled. | |
| # As opposed to the manylinux builds, which we distribute and | |
| # thus only use O3 (because Ofast enables fast-math, which has | |
| # process-wide effects), we test with Ofast here, because we | |
| # expect that some people will compile it themselves with that setting. | |
| CPPFLAGS: "-Ofast -UNDEBUG" | |
| - name: Install RelStorage (Mac) | |
| if: startsWith(runner.os, 'Mac') | |
| run: | | |
| python setup.py bdist_wheel | |
| WHL=$(ls dist/*whl) | |
| python -m pip install -U "$WHL[test,docs,all_tested_drivers]" | |
| env: | |
| # Unlike the above, we are actually distributing these | |
| # wheels, so they need to be built for production use. | |
| CPPFLAGS: "-O3" | |
| # Build for both architectures | |
| ARCHFLAGS: "-arch x86_64 -arch arm64" | |
| - name: Check RelStorage build | |
| run: | | |
| ls -l dist | |
| twine check dist/* | |
| - name: Upload RelStorage wheel | |
| uses: actions/upload-artifact@v4 | |
| with: | |
| name: RelStorage-${{ runner.os }}-${{ matrix.python-version }}.whl | |
| path: dist/*whl | |
| - name: lint | |
| if: matrix.python-version == '3.11' && startsWith(runner.os, 'Linux') | |
| # At this writing, PyLint 2.17/astroid 2.15 won't work on 3.12 | |
| run: | | |
| pip install -U pylint | |
| python -m pylint --limit-inference-results=1 --rcfile=.pylintrc relstorage -f parseable -r n | |
| - name: Initialize Test Databases | |
| if: startsWith(runner.os, 'macOS') | |
| run: | | |
| brew services start mysql | |
| brew services start postgresql | |
| # Make sure postgresql is accepting connections. | |
| # TODO: Use pg_isready in a loop? | |
| sleep 5 | |
| # XXX: mysql isn't currently starting. Why? So | |
| # skip initializing it. | |
| # | |
| # brew postgres uses the current username, apparently, instead of | |
| # the standard "postgres" user as the root. It still uses 'postgres' | |
| # as the default database, though. | |
| brew services list | |
| RELSTORAGETEST_PG_UNAME=$USER RELSTORAGETEST_PG_DBNAME=postgres .travis/postgres.sh | |
| - name: Initialize Test Databases | |
| if: startsWith(runner.os, 'Linux') | |
| run: | | |
| sudo systemctl start mysql.service | |
| echo Configuring MySQL | |
| RELSTORAGETEST_MY_PW="--password=root" .travis/mysql.sh | |
| # XXX: Disabled: The software is installed, but isn't running by default, | |
| # apparently. They *really* want you to use a docker service. | |
| # echo Configuring PostgreSQL | |
| # .travis/postgres.sh | |
| - name: Run tests and report coverage | |
| uses: ./.github/actions/run-tests | |
| with: | |
| useCoverage: ${{ !startsWith(matrix.python-version, 'pypy') }} | |
| - name: Coveralls Parallel | |
| uses: coverallsapp/github-action@v2 | |
| if: ${{ !startsWith(matrix.python-version, 'pypy') }} | |
| with: | |
| flag-name: run-${{ join(matrix.*, '-') }} | |
| parallel: true | |
| - name: Publish package to PyPI (mac) | |
| # We cannot 'uses: pypa/[email protected]' because | |
| # that's apparently a container action, and those don't run on | |
| # the Mac. | |
| if: github.event_name == 'push' && startsWith(github.ref, 'refs/tags') && startsWith(runner.os, 'Mac') | |
| env: | |
| TWINE_PASSWORD: ${{ secrets.TWINE_PASSWORD }} | |
| run: | | |
| twine upload --skip-existing dist/* | |
| coveralls-finish: | |
| needs: test | |
| if: ${{ always() }} | |
| runs-on: ubuntu-latest | |
| steps: | |
| - name: Coveralls Finished | |
| uses: coverallsapp/github-action@v2 | |
| with: | |
| parallel-finished: true | |
| manylinux: | |
| needs: test | |
| runs-on: ubuntu-latest | |
| # We use a regular Python matrix entry to share as much code as possible. | |
| strategy: | |
| matrix: | |
| python-version: [3.9] | |
| image: | |
| - manylinux_2_28_x86_64 | |
| - manylinux2014_aarch64 | |
| - manylinux2014_ppc64le | |
| - manylinux2014_s390x | |
| - manylinux2014_x86_64 | |
| - musllinux_1_1_x86_64 | |
| - musllinux_1_1_aarch64 | |
| name: ${{ matrix.image }} | |
| steps: | |
| - name: checkout | |
| uses: actions/checkout@v4 | |
| - name: Set up Python ${{ matrix.python-version }} | |
| uses: actions/setup-python@v5 | |
| with: | |
| python-version: ${{ matrix.python-version }} | |
| - name: Set up QEMU | |
| uses: docker/setup-qemu-action@v3 | |
| with: | |
| platforms: all | |
| - name: Build RelStorage | |
| env: | |
| DOCKER_IMAGE: quay.io/pypa/${{ matrix.image }} | |
| run: bash ./scripts/releases/make-manylinux | |
| - name: Store RelStorage wheels | |
| uses: actions/upload-artifact@v4 | |
| with: | |
| path: wheelhouse/*whl | |
| name: ${{ matrix.image }}_wheels.zip | |
| - name: Publish package to PyPI | |
| uses: pypa/[email protected] | |
| if: github.event_name == 'push' && startsWith(github.ref, 'refs/tags') | |
| with: | |
| user: __token__ | |
| password: ${{ secrets.TWINE_PASSWORD }} | |
| skip_existing: true | |
| packages_dir: wheelhouse/ | |
| # TODO: | |
| # * Use YAML syntax to share snippets, like the old .travis.yml did | |
| # Sadly, as of 2021-02-01, Github Actions does not support anchors at | |
| # all. Just having an anchor results in an error: | |
| # | |
| # The workflow is not valid. .github/workflows/tests.yml: Anchors | |
| # are not currently supported. Remove the anchor 'an-strategy' | |
| # | |
| # The alternative of using composite actions doesn't work either, | |
| # because composite actions are limited to running shell scripts. | |
| # Steps in them can't call other actions with `uses:`, and nor can | |
| # they be conditional with `if:`. |