Skip to content

Latest commit

 

History

History
51 lines (34 loc) · 4.97 KB

README.md

File metadata and controls

51 lines (34 loc) · 4.97 KB
Raw

FlexFlow Docker

This folder contains the Dockerfiles and scripts that you can use to quickly run FlexFlow with no manual installation required. To use the containers, follow the steps below.

Prerequisites

You will need a machine with a NVIDIA GPU, with drivers installed. You will also need to have Docker and the Nvidia Container Toolkit installed on the host machine.

Downloading a pre-built package

The fastest way to run FlexFlow is to use one of the pre-built containers, which we update for each commit to the inference branch (the inference branch is currently ahead of the master branch). The available containers are the following, and can be found at this link:

  • flexflow: the pre-built version of FlexFlow. We currently publish one version targeting GPUs with a hip_rocm backend (flexflow-hip_rocm), and several versions for CUDA GPUs (one for each of the following CUDA versions 11.1, 11.2, 11.3, 11.5, 11.6, 11.7, and 11.8). The CUDA images are named flexflow-cuda-<CUDA version>, e.g. flexflow-cuda-11.8
  • flexflow-environment: this is the base layer for flexflow. The packages are used in CI or for internal use, and contain all the dependencies needed to build/run Flexflow. You may find them useful if you want to build FlexFlow yourself. We also publish one version of flexflow-environment for hip_rocm and one for each CUDA version in the list above. The naming convention is similar, too. For example, the flexflow-environment image for CUDA 11.8 is tagged flexflow-environment-cuda-11.8.

The easiest way to download any of the Docker containers above is to call:

FF_GPU_BACKEND=<YOUR_GPU_BACKEND> cuda_version=<DESIRED_CUDA_VERSION> ./docker/pull.sh <CONTAINER_NAME>

where CONTAINER_NAME is flexflow (or flexflow-environment), and FF_GPU_BACKEND/cuda_version are optional environment variables you can use if you wish to download the docker image for a GPU backend and/or cuda version other than those installed on your machine (leaving these variables unset will let the script autodetect which version to download depending on your setup).

After downloading a container you can use the run.sh script to run it by following the instructions in the section below.

Building a Docker container from scratch

If you prefer to build one of the Docker containers from scratch, you can do so with the help of the build.sh script. You can configure the build via the same environment variables that you'd use to configure a CMake build (refer to the Installation guide and to the config/config.linux file). For example, to build for a CUDA backend, you can export FF_GPU_BACKEND=cuda (you can also omit this since cuda is the default value for FF_GPU_BACKEND). When building for the cuda backend, you can pick the CUDA version by setting the optional environment variable cuda_version, e.g.: export cuda_version=11.8. Leaving the cuda_version variable blank will let the script autodetect the CUDA version installed on the host machine, and build for that version. Setting the cuda_version env will have no effect when building for a GPU backend other than CUDA.

To build the FlexFlow container, run (the flexflow argument of the build script can be omitted):

FF_GPU_BACKEND=<YOUR_GPU_BACKEND> cuda_version=<DESIRED_CUDA_VERSION> ./docker/build.sh flexflow

If you only want to build the flexflow-environment image (the base layers of the flexflow container, used in CI and for other internal purposes), run:

FF_GPU_BACKEND=<YOUR_GPU_BACKEND> cuda_version=<DESIRED_CUDA_VERSION> ./docker/build.sh flexflow-environment

Running a Docker container

After having either built or downloaded a Docker container by following the instructions above, you can run it with the following command (image name argument of the run script can be omitted). Once again, you can set the FF_GPU_BACKEND and cuda_version optional environment variables to run the docker image with the desired GPU backend and CUDA version. Leaving these variables unset will instruct the script to autodetect the GPU backend and CUDA version installed on the current machine and run the Docker container with it if available.

FF_GPU_BACKEND=<YOUR_GPU_BACKEND> cuda_version=<DESIRED_CUDA_VERSION> ./docker/run.sh --image_name flexflow

If you wish to run the flexflow-environment container, run:

FF_GPU_BACKEND=<YOUR_GPU_BACKEND> cuda_version=<DESIRED_CUDA_VERSION> ./docker/run.sh --image_name flexflow-environment

N.B.: If you don't have GPUs available on the machine, or you wish to run the docker image without attaching GPUs, you can set the environment variable ATTACH_GPUS=false before running the script.