BoneIO is a compact IO controller for home automation. Main features of this controller are
- Compact size (27x11x6)cm - 15 DIN modules
- DIN rail compatibility
- Low price
- Open HSP (See below)
- 52 digital inputs
- 7 analog to digital converters
- i2c
- rs485
- OLED display
- user switch
- 24V PSU input
- ADC VDD output
- 12-48V external PSU for digital inputs
- jumper to switch between internal and external PSU for inputs
- jumper to switch between vcc and gnd input control
- 24 relays (230V/16A) max current 5A* (10A* tinned traces, 16A* bridged 1,5 mm²) *everything needs to be verified
- temp sensor
- 32 relays (230V/5A)
- temp sensor
BoneIO is an Open HSP initiative where everything is open on GPL-3.0 License
- H (Hardware) stands for projects of electronic boards which you can print yourself
- S (Software) stands for ready to use firmware you can use on printed hardware
- P (Printables) stands for cases and other plastic elements you can print on a 3D printer and use with our hardware
With all elements in place, you can assemble a complete device. You can use it as-is or fork and modify it for your needs.
If you want to contribute to the project here are the rules:
- First watch this short training: How to use repo
- When you have something to discuss first check out our Team chat
- When you have a specific problem/feature to report add new issue.
Remember to report single topic in one issue. If you have complex topic try split it to more precise topics. - When you want change something in the repository use your Fork and make new Pull Request (See Working with repository (Polish))
- You can also monitor our Facebook group
- Working with repository (Polish)
- Youtube
- Project introduction (Polish)
- Case introduction (Polish)
- Project status - 17.10.2021 (Polish)
