Gerber to g code - Advances in PCB with two tools of different diameter

[MARIOBASZ]

Can anyone implement or know of a Gerber File to G code translator?
I have made a lot of progress on my PCB milling fixture with two different diameter tools.
intersection, union (or solid form) and difference between forms, ok.
It remains for me to complete the pocket with a 0.10mm bit where it corresponds (intersection operation), because the 0.7mm bit does not reach there (union operation), respect the non-entry of the correct limit (difference operation).

[MARIOBASZ]

[MARIOBASZ]

Note: This will also be useful for other tasks, such as making posters with two tools and reducing work time.
However, it will be necessary, in cases where the profile operation generates two silhouettes in the same block, to separate them so that they are in separate blocks.

[ashokavarthanan]

Try pcb2gcode
https://github.com/pcb2gcode/pcb2gcode/releases/tag/v2.4.0

[MARIOBASZ]

Excellent!
It could have saved me time of work, if I had found it earlier!
I will evaluate whether to continue and complete with the plugin for two bits, or keep the plugin / plugins intersection, difference solid union / exclusion (from Harvie plugins)

[m1ch]

In case it is still relevant, or someone is searching for a similar tool. Flatcam is also an excellent tool.

[ashokavarthanan]

In case it is still relevant, or someone is searching for a similar tool. Flatcam is also an excellent tool.

Flatcam is no update.
And its created g-code is more time waste when using Extra pass.
problem is more Unnecessary Z Moves when using Extra pass.
and XY same (Unnecessary) Moving (Repeated Moving when using Extra pass).

when not using Extra pass, its an excellent tool.