.github/workflows/build.yml

name: build

on:
  workflow_dispatch:
    inputs:
      production:
        description: 设置编译的固件型号,空格分隔.
        default: "MI-R4A"
        required: false
      release:
        description: "是否需要发布到Release? (不发布也可以到Artifacts下载)"
        default: 'yes'
        required: false
        
jobs:
  build:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v4
    - uses: hendrikmuhs/ccache-action@v1.2
      with:
          key: "${{ github.event.inputs.production }}"
    - uses: actions/setup-go@v5
      with:
          go-version: '1.21'
          check-latest: true
          cache: false
    - uses: actions/setup-node@v3
      with:
          node-version: 18
          check-latest: true                     
    - name: Prepare environment
      run: |
          sudo apt update
          sudo apt install libtool-bin gperf python3-docutils autopoint gettext ccache                                     
    - name: Custom config
      env:
        TNAME: "${{ github.event.inputs.production }}"
        MHZ: 1200               # CPU超频频率 必须为20的倍数
      run: |
        cd trunk
        echo "CPU超频到$MHZ"mhz
        echo "修改CPU频率"
        clock=`echo "obase=16 ; ibase=10 ; (((($MHZ/20)-1)*16+2))" | bc`
        echo "16进制$clock"
        sed -i "554,555s:0xff:0x7ff:g" linux-3.4.x/arch/mips/rt2880/init.c
        sed -i "554,556s:0xc2:0x$clock:g" linux-3.4.x/arch/mips/rt2880/init.c
        if [ ! -f configs/templates/$TNAME.config ] ; then
        echo "configs/templates/$TNAME.config not found "
        exit 0
        fi
        cp -f configs/templates/$TNAME.config .config
        sed -i 's/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=n/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y/g' .config
        ############################################################################################
        #因不同型号配置功能不一样，所以先把配置项删除，如果你自己要添加其他的，也要写上删除这一条，切记！！！
        ############################################################################################
        sed -i '/CONFIG_FIRMWARE_INCLUDE_MENTOHUST/d' .config #删除配置项MENTOHUST
        sed -i '/CONFIG_FIRMWARE_INCLUDE_SOFTETHERVPN_SERVER/d' .config #删除配置项SOFTETHERVPN
        sed -i '/CONFIG_FIRMWARE_INCLUDE_SOFTETHERVPN_CLIENT/d' .config #删除配置项SOFTETHERVPN
        sed -i '/CONFIG_FIRMWARE_INCLUDE_SOFTETHERVPN_CMD/d' .config #删除配置项SOFTETHERVPN
        sed -i '/CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT/d' .config #删除配置项SCUTCLIENT
        sed -i '/CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS/d' .config #删除配置项SS plus+
        sed -i '/CONFIG_FIRMWARE_INCLUDE_SSSERVER/d' .config #删除配置项SS server
        sed -i '/CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER/d' .config #删除配置项DNSFORWARDER
        sed -i '/CONFIG_FIRMWARE_INCLUDE_ADBYBY/d' .config #删除配置项adbyby plus+
        sed -i '/CONFIG_FIRMWARE_INCLUDE_FRPC/d' .config #删除配置项FRPC
        sed -i '/CONFIG_FIRMWARE_INCLUDE_FRPS/d' .config #删除配置项FRPS
        sed -i '/CONFIG_FIRMWARE_INCLUDE_TUNSAFE/d' .config #删除配置项TUNSAFE
        sed -i '/CONFIG_FIRMWARE_INCLUDE_ALIDDNS/d' .config #删除配置项阿里DDNS
        sed -i '/CONFIG_FIRMWARE_INCLUDE_SMARTDNS/d' .config #删除配置项SMARTDNS
        sed -i '/CONFIG_FIRMWARE_INCLUDE_SRELAY/d' .config #删除配置项SRELAY
        sed -i '/CONFIG_FIRMWARE_INCLUDE_KUMASOCKS/d' .config #删除配置项KUMASOCKS
        sed -i '/CONFIG_FIRMWARE_CPU_900MHZ/d' .config #删除配置项超频900MHz
        sed -i '/CONFIG_FIRMWARE_INCLUDE_SSOBFS/d' .config
        sed -i '/CONFIG_FIRMWARE_INCLUDE_V2RAY/d' .config
        sed -i '/CONFIG_FIRMWARE_INCLUDE_XRAY/d' .config
        sed -i '/CONFIG_FIRMWARE_INCLUDE_TROJAN/d' .config
        sed -i '/CONFIG_FIRMWARE_INCLUDE_KOOLPROXY/d' .config
        sed -i '/CONFIG_FIRMWARE_INCLUDE_SMARTDNSBIN/d' .config
        sed -i '/CONFIG_FIRMWARE_INCLUDE_ADGUARDHOME/d' .config
        sed -i '/CONFIG_FIRMWARE_INCLUDE_CADDY/d' .config
        sed -i '/CONFIG_FIRMWARE_INCLUDE_CADDYBIN/d' .config
        sed -i '/CONFIG_FIRMWARE_INCLUDE_WYY/d' .config
        sed -i '/CONFIG_FIRMWARE_INCLUDE_WYYBIN/d' .config
        sed -i '/CONFIG_FIRMWARE_INCLUDE_ZEROTIER/d' .config
        sed -i '/CONFIG_FIRMWARE_INCLUDE_DDNSTO/d' .config
        sed -i '/CONFIG_FIRMWARE_INCLUDE_WIREGUARD/d' .config
        sed -i '/CONFIG_FIRMWARE_INCLUDE_ALDRIVER/d' .config
        sed -i '/CONFIG_FIRMWARE_INCLUDE_MSD_LITE/d' .config
        sed -i '/CONFIG_FIRMWARE_INCLUDE_MTR/d' .config
        sed -i 's/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=n/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y/g' .config
        ######################################################################
        #以下选项是定义你需要的功能（y=集成,n=忽略），重新写入到.config文件
        ######################################################################
        echo "CONFIG_FIRMWARE_INCLUDE_MENTOHUST=n" >> .config #MENTOHUST
        echo "CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT=n" >> .config #SCUTCLIENT
        echo "CONFIG_FIRMWARE_INCLUDE_SSSERVER=n" >> .config #SS server
        echo "CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER=n" >> .config #DNSFORWARDER
        echo "CONFIG_FIRMWARE_INCLUDE_TUNSAFE=n" >> .config #TUNSAFE
        echo "CONFIG_FIRMWARE_INCLUDE_SRELAY=n" >> .config #可以不集成
        echo "CONFIG_FIRMWARE_CPU_900MHZ=y" >> .config #开启超频，仅MT7621可用
        ##科学上网## 
        echo "CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS=y" >> .config #科学上网插件，选择n后全部有关插件都不集成
        echo "CONFIG_FIRMWARE_INCLUDE_SSOBFS=n" >> .config # simple-obfs混淆插件
        echo "CONFIG_FIRMWARE_INCLUDE_V2RAY=n" >> .config #集成v2ray执行文件（3.6M左右)
        echo "CONFIG_FIRMWARE_INCLUDE_XRAY=y" >> .config #集成xray执行文件（3.6M左右)
        echo "CONFIG_FIRMWARE_INCLUDE_TROJAN=y" >> .config #集成trojan执行文件(1.1M左右)
        echo "CONFIG_FIRMWARE_INCLUDE_KUMASOCKS=n" >> .config #socks5服务端
        ##科学上网##
        
        ##广告管理##
        echo "CONFIG_FIRMWARE_INCLUDE_ADBYBY=y" >> .config #adbyby plus+
        echo "CONFIG_FIRMWARE_INCLUDE_KOOLPROXY=n" >> .config #KP广告过滤
        ##广告管理##
        
        ##DNS服务##
        echo "CONFIG_FIRMWARE_INCLUDE_SMARTDNS=y" >> .config #smartdns
        echo "CONFIG_FIRMWARE_INCLUDE_SMARTDNSBIN=n" >> .config #smartdns二进制文件
        echo "CONFIG_FIRMWARE_INCLUDE_ADGUARDHOME=y" >> .config #adg DNS去AD
        ##DNS服务##
        
        ##文件管理##
        echo "CONFIG_FIRMWARE_INCLUDE_CADDY=n" >> .config #在线文件管理服务
        echo "CONFIG_FIRMWARE_INCLUDE_CADDYBIN=n" >> .config #集成caddu执行文件，此文件有13M,请注意固件大小。如果不集成，会从网上下载下来执行，不影响正常使用
        ##文件管理##
        
        ##音乐解锁##
        echo "CONFIG_FIRMWARE_INCLUDE_WYY=n" >> .config #网易云解锁
        echo "CONFIG_FIRMWARE_INCLUDE_WYYBIN=n" >> .config #网易云解锁GO版本执行文件（4M多）注意固件超大小,不集成会自动下载
        ##音乐解锁##
        
        ##内网穿透服务##
        echo "CONFIG_FIRMWARE_INCLUDE_ZEROTIER=n" >> .config #zerotier ~1.3M
        echo "CONFIG_FIRMWARE_INCLUDE_ALIDDNS=n" >> .config #阿里DDNS
        echo "CONFIG_FIRMWARE_INCLUDE_FRPC=n" >> .config #内网穿透FRPC
        echo "CONFIG_FIRMWARE_INCLUDE_FRPS=n" >> .config #内网穿透FRPS
        echo "CONFIG_FIRMWARE_INCLUDE_DDNSTO=n" >> .config #ddnsto  ~0.5M
        echo "CONFIG_FIRMWARE_INCLUDE_WIREGUARD=n" >>.config #wireguard 10k
        ##内网穿透服务##
        echo "CONFIG_FIRMWARE_INCLUDE_ALDRIVER=n" >> .config #ALDRIVER  ~3m
        echo "CONFIG_FIRMWARE_INCLUDE_MSD_LITE=y" >> .config #MSD_LITE
        echo "CONFIG_FIRMWARE_INCLUDE_MTR=n" >> .config #MTR
        #########################################################################################
        # 自定义添加其它功能请参考源码configs/templates/目录下的config文件。按照上面的格式添加即可
        # 格式如下：
        # sed -i '/自定义项/d' .config
        # echo "自定义项=y" >> .config
        #########################################################################################
    - name: Build firmware
      run: |
        make "${{ github.event.inputs.production }}"
        echo "TAG_ANME=$(date +%Y%m%d)" >> $GITHUB_ENV
        #cd trunk
        #mkdir -p /opt/images/
        #sudo ./build_firmware_ci $"${{ github.event.inputs.production }}" 0
        #sudo mv -f images/*.trx /opt/images/                    
    - name : Upload images to Artifact
      uses: actions/upload-artifact@v4
      with:
        name: ${{ github.event.inputs.production }}-${{ env.TAG_ANME }}
        path: trunk/images/*.trx        
    - name: Upload images to Releases
      uses: ncipollo/release-action@v1
      if: ${{ github.event.inputs.release == 'yes' }}
      with:
        commit: ${{ github.sha }}
        tag: ${{ env.TAG_ANME }}
        artifacts: trunk/images/*.trx
        allowUpdates: true