README.md

fox_6.0 (android-6.0) Based Manifest for OrangeFox Recovery

Notes

• This is NOT an Official Manifest.
• This Manifest uses the Official twrp-6.0 source, with a Patched Build System for OrangeFox, and the OFFICIAL OrangeFox bootable/recovery and vendor/recovery trees.
• The Build Environment Setup Guide Below, is the same till Step Number 4 (except for apt). For Other Linux Distros, Read This.

How to Build

1. Set up the Build Environment

   cd ~
   sudo apt install git aria2 -y
   git clone https://github.com/akhilnarang/scripts.git ~/scripts
   cd ~/scripts
   sudo bash setup/android_build_env.sh 

2. Sync the OrangeFox (fox_6.0) Source

   mkdir ~/OrangeFox_6
   cd ~/OrangeFox_6
   repo init -u https://github.com/OrangeFoxRecovery/fox-6.0_manifest.git -b fox_6.0
   repo sync -j$(nproc --all) --force-sync

   Tip:

   • Use repo init --depth=1 -u https://github.com/OrangeFoxRecovery/fox-6.0_manifest.git -b fox_6.0 to initialize a Shallow Clone to save Disk Space.

3. Place Trees and Kernel

   For Example: (Yours may be Different)

   cd ~/OrangeFox_6
   git clone https://github.com/OrangeFoxRecovery/device_samsung_fortuna3g.git device/samsung/fortuna3g

4. Build it!

   cd ~/OrangeFox_6
   . build/envsetup.sh
   export ALLOW_MISSING_DEPENDENCIES=true
   export FOX_USE_TWRP_RECOVERY_IMAGE_BUILDER=1
   export LC_ALL="C"
   export OF_LEGACY_SHAR512=1
   lunch omni_<device>-eng
   mka recoveryimage

   Notes:

   • If you are getting errors like "Keymaster2" during Compilation, run export OF_DISABLE_KEYMASTER2=1 and then Build Again.

5. Take your OrangeFox Build

   Find your build:

   cd ~/OrangeFox_6
   ls out/target/product/*/

6. Enjoy!

   Now enjoy the Latest OrangeFox Recovery on an old device too! :)

Credits:

• TeamWin - for TWRP Manifest
• The OrangeFox Team - for the Amazing Recovery!
• @DarthJabba9 - For the fox_6.0 Build System Patch File.
• @Sushrut1101 - For adding the patches in a proper Manifest.