diff --git a/arch/arm/crypto/aes-armv4.S b/arch/arm/crypto/aes-armv4.S index 3a14ea8fe..ebb9761fb 100755 --- a/arch/arm/crypto/aes-armv4.S +++ b/arch/arm/crypto/aes-armv4.S @@ -35,6 +35,7 @@ @ that is being targetted. #include +#include .text @@ -648,7 +649,7 @@ _armv4_AES_set_encrypt_key: .Ldone: mov r0,#0 ldmia sp!,{r4-r12,lr} -.Labrt: mov pc,lr +.Labrt: ret lr ENDPROC(private_AES_set_encrypt_key) .align 5 diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index f0963bb79..dadc48197 100755 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -368,4 +368,25 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) #endif .endm + .irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo + .macro ret\c, reg +#if __LINUX_ARM_ARCH__ < 6 + mov\c pc, \reg +#else + .ifeqs "\reg", "lr" + bx\c \reg + .else + mov\c pc, \reg + .endif +#endif + .endm + .endr + + .macro ret.w, reg + ret \reg +#ifdef CONFIG_THUMB2_KERNEL + nop +#endif + .endm + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S index 88d61815f..469a2b30f 100755 --- a/arch/arm/include/asm/entry-macro-multi.S +++ b/arch/arm/include/asm/entry-macro-multi.S @@ -35,5 +35,5 @@ \symbol_name: mov r8, lr arch_irq_handler_default - mov pc, r8 + ret r8 .endm diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 14f7c3b14..78c91b5f9 100755 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -90,7 +90,7 @@ ENTRY(printascii) ldrneb r1, [r0], #1 teqne r1, #0 bne 1b - mov pc, lr + ret lr ENDPROC(printascii) ENTRY(printch) @@ -105,7 +105,7 @@ ENTRY(debug_ll_addr) addruart r2, r3, ip str r2, [r0] str r3, [r1] - mov pc, lr + ret lr ENDPROC(debug_ll_addr) #endif @@ -116,7 +116,7 @@ ENTRY(printascii) mov r0, #0x04 @ SYS_WRITE0 ARM( svc #0x123456 ) THUMB( svc #0xab ) - mov pc, lr + ret lr ENDPROC(printascii) ENTRY(printch) @@ -125,14 +125,14 @@ ENTRY(printch) mov r0, #0x03 @ SYS_WRITEC ARM( svc #0x123456 ) THUMB( svc #0xab ) - mov pc, lr + ret lr ENDPROC(printch) ENTRY(debug_ll_addr) mov r2, #0 str r2, [r0] str r2, [r1] - mov pc, lr + ret lr ENDPROC(debug_ll_addr) #endif diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index b87a3d5cb..f3b3233d2 100755 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -224,7 +224,7 @@ svc_preempt: 1: bl preempt_schedule_irq @ irq en/disable is done inside ldr r0, [tsk, #TI_FLAGS] @ get new tasks TI_FLAGS tst r0, #_TIF_NEED_RESCHED - moveq pc, r8 @ go again + reteq r8 @ go again b 1b #endif @@ -486,7 +486,8 @@ ENDPROC(__und_usr) */ .pushsection .fixup, "ax" .align 2 -4: mov pc, r9 +4: str r4, [sp, #S_PC] @ retry current instruction + ret r9 .popsection .pushsection __ex_table,"a" .long 1b, 4b @@ -548,7 +549,7 @@ call_fpe: #endif tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27 tstne r0, #0x04000000 @ bit 26 set on both ARM and Thumb-2 - moveq pc, lr + reteq lr and r8, r0, #0x00000f00 @ mask out CP number THUMB( lsr r8, r8, #8 ) mov r7, #1 @@ -567,33 +568,33 @@ call_fpe: THUMB( add pc, r8 ) nop - movw_pc lr @ CP#0 + ret.w lr @ CP#0 W(b) do_fpe @ CP#1 (FPE) W(b) do_fpe @ CP#2 (FPE) - movw_pc lr @ CP#3 + ret.w lr @ CP#3 #ifdef CONFIG_CRUNCH b crunch_task_enable @ CP#4 (MaverickCrunch) b crunch_task_enable @ CP#5 (MaverickCrunch) b crunch_task_enable @ CP#6 (MaverickCrunch) #else - movw_pc lr @ CP#4 - movw_pc lr @ CP#5 - movw_pc lr @ CP#6 + ret.w lr @ CP#4 + ret.w lr @ CP#5 + ret.w lr @ CP#6 #endif - movw_pc lr @ CP#7 - movw_pc lr @ CP#8 - movw_pc lr @ CP#9 + ret.w lr @ CP#7 + ret.w lr @ CP#8 + ret.w lr @ CP#9 #ifdef CONFIG_VFP W(b) do_vfp @ CP#10 (VFP) W(b) do_vfp @ CP#11 (VFP) #else - movw_pc lr @ CP#10 (VFP) - movw_pc lr @ CP#11 (VFP) + ret.w lr @ CP#10 (VFP) + ret.w lr @ CP#11 (VFP) #endif - movw_pc lr @ CP#12 - movw_pc lr @ CP#13 - movw_pc lr @ CP#14 (Debug) - movw_pc lr @ CP#15 (Control) + ret.w lr @ CP#12 + ret.w lr @ CP#13 + ret.w lr @ CP#14 (Debug) + ret.w lr @ CP#15 (Control) #ifdef NEED_CPU_ARCHITECTURE .align 2 @@ -645,7 +646,7 @@ ENTRY(fp_enter) .popsection ENTRY(no_fp) - mov pc, lr + ret lr ENDPROC(no_fp) __und_usr_fault_32: @@ -741,7 +742,7 @@ ENDPROC(__switch_to) #ifdef CONFIG_ARM_THUMB bx \reg #else - mov pc, \reg + ret \reg #endif .endm @@ -833,7 +834,7 @@ kuser_cmpxchg64_fixup: #if __LINUX_ARM_ARCH__ < 6 bcc kuser_cmpxchg32_fixup #endif - mov pc, lr + ret lr .previous #else @@ -901,7 +902,7 @@ kuser_cmpxchg32_fixup: subs r8, r4, r7 rsbcss r8, r8, #(2b - 1b) strcs r7, [sp, #S_PC] - mov pc, lr + ret lr .previous #else diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 11d68917d..341f8127e 100755 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include @@ -88,7 +89,7 @@ ENTRY(ret_from_fork) cmp r5, #0 movne r0, r4 adrne lr, BSYM(1f) - movne pc, r5 + retne r5 1: get_thread_info tsk b ret_slow_syscall ENDPROC(ret_from_fork) @@ -290,7 +291,7 @@ ENDPROC(ftrace_graph_caller_old) .macro mcount_exit ldmia sp!, {r0-r3, ip, lr} - mov pc, ip + ret ip .endm ENTRY(__gnu_mcount_nc) @@ -298,7 +299,7 @@ UNWIND(.fnstart) #ifdef CONFIG_DYNAMIC_FTRACE mov ip, lr ldmia sp!, {lr} - mov pc, ip + ret ip #else __mcount #endif @@ -333,12 +334,12 @@ return_to_handler: bl ftrace_return_to_handler mov lr, r0 @ r0 has real ret addr ldmia sp!, {r0-r3} - mov pc, lr + ret lr #endif ENTRY(ftrace_stub) .Lftrace_stub: - mov pc, lr + ret lr ENDPROC(ftrace_stub) #endif /* CONFIG_FUNCTION_TRACER */ @@ -563,7 +564,7 @@ sys_mmap2: streq r5, [sp, #4] beq sys_mmap_pgoff mov r0, #-EINVAL - mov pc, lr + ret lr #else str r5, [sp, #4] b sys_mmap_pgoff diff --git a/arch/arm/kernel/fiqasm.S b/arch/arm/kernel/fiqasm.S index 207f9d652..8dd26e1a9 100755 --- a/arch/arm/kernel/fiqasm.S +++ b/arch/arm/kernel/fiqasm.S @@ -32,7 +32,7 @@ ENTRY(__set_fiq_regs) ldr lr, [r0] msr cpsr_c, r1 @ return to SVC mode mov r0, r0 @ avoid hazard prior to ARMv4 - mov pc, lr + ret lr ENDPROC(__set_fiq_regs) ENTRY(__get_fiq_regs) @@ -45,5 +45,5 @@ ENTRY(__get_fiq_regs) str lr, [r0] msr cpsr_c, r1 @ return to SVC mode mov r0, r0 @ avoid hazard prior to ARMv4 - mov pc, lr + ret lr ENDPROC(__get_fiq_regs) diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 5b391a689..d01a6fc71 100755 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -10,6 +10,7 @@ * published by the Free Software Foundation. * */ +#include #define ATAG_CORE 0x54410001 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) @@ -61,10 +62,10 @@ __vet_atags: cmp r5, r6 bne 1f -2: mov pc, lr @ atag/dtb pointer is ok +2: ret lr @ atag/dtb pointer is ok 1: mov r2, #0 - mov pc, lr + ret lr ENDPROC(__vet_atags) /* @@ -161,7 +162,7 @@ __lookup_processor_type: cmp r5, r6 blo 1b mov r5, #0 @ unknown processor -2: mov pc, lr +2: ret lr ENDPROC(__lookup_processor_type) /* diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 09a0d182d..31320d816 100755 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -139,7 +139,7 @@ ENTRY(stext) mov r8, r4 @ set TTBR1 to swapper_pg_dir ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( mov pc, r12 ) + THUMB( ret r12 ) 1: b __enable_mmu ENDPROC(stext) .ltorg @@ -333,7 +333,7 @@ __create_page_tables: #ifdef CONFIG_ARM_LPAE sub r4, r4, #0x1000 @ point to the PGD table #endif - mov pc, lr + ret lr ENDPROC(__create_page_tables) .ltorg .align @@ -381,7 +381,7 @@ ENTRY(secondary_startup) ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor @ (return control reg) THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( mov pc, r12 ) + THUMB( ret r12 ) ENDPROC(secondary_startup) /* @@ -469,7 +469,7 @@ ENTRY(__turn_mmu_on) instr_sync mov r3, r3 mov r3, r13 - mov pc, r3 + ret r3 __turn_mmu_on_end: ENDPROC(__turn_mmu_on) .popsection @@ -488,12 +488,12 @@ __fixup_smp: orr r4, r4, #0x0000b000 orr r4, r4, #0x00000020 @ val 0x4100b020 teq r3, r4 @ ARM 11MPCore? - moveq pc, lr @ yes, assume SMP + reteq lr @ yes, assume SMP mrc p15, 0, r0, c0, c0, 5 @ read MPIDR and r0, r0, #0xc0000000 @ multiprocessing extensions and teq r0, #0x80000000 @ not part of a uniprocessor system? - moveq pc, lr @ yes, assume SMP + retne lr __fixup_smp_on_up: adr r0, 1f @@ -520,7 +520,7 @@ smp_on_up: .text __do_fixup_smp_on_up: cmp r4, r5 - movhs pc, lr + reths lr ldmia r4!, {r0, r6} ARM( str r6, [r0, r3] ) THUMB( add r0, r0, r3 ) @@ -612,7 +612,7 @@ ARM_BE8(rev16 ip, ip) 2: cmp r4, r5 ldrcc r7, [r4], #4 @ use branch for delay slot bcc 1b - mov pc, lr + ret lr #endif ENDPROC(__fixup_a_pv_table) diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index dbe211079..c76087b33 100755 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -99,7 +99,7 @@ ENTRY(__hyp_stub_install_secondary) * immediately. */ compare_cpu_mode_with_primary r4, r5, r6, r7 - movne pc, lr + retne lr /* * Once we have given up on one CPU, we do not try to install the @@ -111,7 +111,7 @@ ENTRY(__hyp_stub_install_secondary) */ cmp r4, #HYP_MODE - movne pc, lr @ give up if the CPU is not in HYP mode + retne lr @ give up if the CPU is not in HYP mode /* * Configure HSCTLR to set correct exception endianness/instruction set @@ -196,7 +196,7 @@ ENDPROC(__hyp_get_vectors) @ fall through ENTRY(__hyp_set_vectors) __HVC(0) - mov pc, lr + ret lr ENDPROC(__hyp_set_vectors) #ifndef ZIMAGE diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index 95858966d..35e72585e 100755 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -3,6 +3,7 @@ */ #include +#include #include .align 3 /* not needed for this code, but keeps fncpy() happy */ @@ -59,7 +60,7 @@ ENTRY(relocate_new_kernel) mov r0,#0 ldr r1,kexec_mach_type ldr r2,kexec_boot_atags - ARM( mov pc, lr ) + ARM( ret lr ) THUMB( bx lr ) .align diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index baf4d2821..c90855018 100755 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -62,7 +62,7 @@ ENTRY(cpu_resume_mmu) instr_sync mov r0, r0 mov r0, r0 - mov pc, r3 @ jump to virtual address + ret r3 @ jump to virtual address ENDPROC(cpu_resume_mmu) .popsection cpu_resume_after_mmu: diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S index 2cc14dfad..991415d97 100755 --- a/arch/arm/kvm/init.S +++ b/arch/arm/kvm/init.S @@ -17,6 +17,7 @@ */ #include +#include #include #include #include @@ -134,7 +135,7 @@ phase2: ldr r0, =TRAMPOLINE_VA adr r1, target bfi r0, r1, #0, #PAGE_SHIFT - mov pc, r0 + ret r0 target: @ We're now in the trampoline code, switch page tables mcrr p15, 4, rr_lo_hi(r2, r3), c2 diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S index 638deb13d..b05e95840 100755 --- a/arch/arm/lib/ashldi3.S +++ b/arch/arm/lib/ashldi3.S @@ -27,6 +27,7 @@ Boston, MA 02110-1301, USA. */ #include +#include #ifdef __ARMEB__ #define al r1 @@ -47,7 +48,7 @@ ENTRY(__aeabi_llsl) THUMB( lsrmi r3, al, ip ) THUMB( orrmi ah, ah, r3 ) mov al, al, lsl r2 - mov pc, lr + ret lr ENDPROC(__ashldi3) ENDPROC(__aeabi_llsl) diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S index 015e8aa5a..275d7d234 100755 --- a/arch/arm/lib/ashrdi3.S +++ b/arch/arm/lib/ashrdi3.S @@ -27,6 +27,7 @@ Boston, MA 02110-1301, USA. */ #include +#include #ifdef __ARMEB__ #define al r1 @@ -47,7 +48,7 @@ ENTRY(__aeabi_lasr) THUMB( lslmi r3, ah, ip ) THUMB( orrmi al, al, r3 ) mov ah, ah, asr r2 - mov pc, lr + ret lr ENDPROC(__ashrdi3) ENDPROC(__aeabi_lasr) diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index cd07b5814..4f1fb4a73 100755 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -25,7 +25,7 @@ ENTRY(c_backtrace) #if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK) - mov pc, lr + ret lr ENDPROC(c_backtrace) #else stmfd sp!, {r4 - r8, lr} @ Save an extra register so we have a location... diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index d6408d1ee..bf8f43306 100755 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -1,3 +1,4 @@ +#include #include #if __LINUX_ARM_ARCH__ >= 6 @@ -60,7 +61,7 @@ UNWIND( .fnstart ) \instr r2, r2, r3 str r2, [r1, r0, lsl #2] restore_irqs ip - mov pc, lr + ret lr UNWIND( .fnend ) ENDPROC(\name ) .endm @@ -88,7 +89,7 @@ UNWIND( .fnstart ) \store r2, [r1] moveq r0, #0 restore_irqs ip - mov pc, lr + ret lr UNWIND( .fnend ) ENDPROC(\name ) .endm diff --git a/arch/arm/lib/bswapsdi2.S b/arch/arm/lib/bswapsdi2.S new file mode 100644 index 000000000..07cda737b --- /dev/null +++ b/arch/arm/lib/bswapsdi2.S @@ -0,0 +1,37 @@ +#include +#include + +#if __LINUX_ARM_ARCH__ >= 6 +ENTRY(__bswapsi2) + rev r0, r0 + bx lr +ENDPROC(__bswapsi2) + +ENTRY(__bswapdi2) + rev r3, r0 + rev r0, r1 + mov r1, r3 + bx lr +ENDPROC(__bswapdi2) +#else +ENTRY(__bswapsi2) + eor r3, r0, r0, ror #16 + mov r3, r3, lsr #8 + bic r3, r3, #0xff00 + eor r0, r3, r0, ror #8 + ret lr +ENDPROC(__bswapsi2) + +ENTRY(__bswapdi2) + mov ip, r1 + eor r3, ip, ip, ror #16 + eor r1, r0, r0, ror #16 + mov r1, r1, lsr #8 + mov r3, r3, lsr #8 + bic r3, r3, #0xff00 + bic r1, r1, #0xff00 + eor r1, r1, r0, ror #8 + eor r0, r3, ip, ror #8 + ret lr +ENDPROC(__bswapdi2) +#endif diff --git a/arch/arm/lib/call_with_stack.S b/arch/arm/lib/call_with_stack.S index 916c80f13..ed1a42181 100755 --- a/arch/arm/lib/call_with_stack.S +++ b/arch/arm/lib/call_with_stack.S @@ -36,9 +36,9 @@ ENTRY(call_with_stack) mov r0, r1 adr lr, BSYM(1f) - mov pc, r2 + ret r2 1: ldr lr, [sp] ldr sp, [sp, #4] - mov pc, lr + ret lr ENDPROC(call_with_stack) diff --git a/arch/arm/lib/csumpartial.S b/arch/arm/lib/csumpartial.S index 31d3cb347..984e0f29d 100755 --- a/arch/arm/lib/csumpartial.S +++ b/arch/arm/lib/csumpartial.S @@ -97,7 +97,7 @@ td3 .req lr #endif #endif adcnes sum, sum, td0 @ update checksum - mov pc, lr + ret lr ENTRY(csum_partial) stmfd sp!, {buf, lr} diff --git a/arch/arm/lib/csumpartialcopygeneric.S b/arch/arm/lib/csumpartialcopygeneric.S index d6e742d24..10b459096 100755 --- a/arch/arm/lib/csumpartialcopygeneric.S +++ b/arch/arm/lib/csumpartialcopygeneric.S @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include /* * unsigned int @@ -40,7 +41,7 @@ sum .req r3 adcs sum, sum, ip, put_byte_1 @ update checksum strb ip, [dst], #1 tst dst, #2 - moveq pc, lr @ dst is now 32bit aligned + reteq lr @ dst is now 32bit aligned .Ldst_16bit: load2b r8, ip sub len, len, #2 @@ -48,7 +49,7 @@ sum .req r3 strb r8, [dst], #1 adcs sum, sum, ip, put_byte_1 strb ip, [dst], #1 - mov pc, lr @ dst is now 32bit aligned + ret lr @ dst is now 32bit aligned /* * Handle 0 to 7 bytes, with any alignment of source and diff --git a/arch/arm/lib/delay-loop.S b/arch/arm/lib/delay-loop.S index 36b668d8e..7fe85de65 100755 --- a/arch/arm/lib/delay-loop.S +++ b/arch/arm/lib/delay-loop.S @@ -35,7 +35,7 @@ ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06 mul r0, r2, r0 @ max = 2^32-1 add r0, r0, r1, lsr #32-6 movs r0, r0, lsr #6 - moveq pc, lr + reteq lr /* * loops = r0 * HZ * loops_per_jiffy / 1000000 @@ -45,23 +45,23 @@ ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06 ENTRY(__loop_delay) subs r0, r0, #1 #if 0 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 #endif bhi __loop_delay - mov pc, lr + ret lr ENDPROC(__loop_udelay) ENDPROC(__loop_const_udelay) ENDPROC(__loop_delay) diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S index e55c4842c..a9eafe498 100755 --- a/arch/arm/lib/div64.S +++ b/arch/arm/lib/div64.S @@ -13,6 +13,7 @@ */ #include +#include #include #ifdef __ARMEB__ @@ -97,7 +98,7 @@ UNWIND(.fnstart) mov yl, #0 cmpeq xl, r4 movlo xh, xl - movlo pc, lr + retlo lr @ The division loop for lower bit positions. @ Here we shift remainer bits leftwards rather than moving the @@ -111,14 +112,14 @@ UNWIND(.fnstart) subcs xh, xh, r4 movs ip, ip, lsr #1 bne 4b - mov pc, lr + ret lr @ The top part of remainder became zero. If carry is set @ (the 33th bit) this is a false positive so resume the loop. @ Otherwise, if lower part is also null then we are done. 6: bcs 5b cmp xl, #0 - moveq pc, lr + reteq lr @ We still have remainer bits in the low part. Bring them up. @@ -144,7 +145,7 @@ UNWIND(.fnstart) movs ip, ip, lsr #1 mov xh, #1 bne 4b - mov pc, lr + ret lr 8: @ Division by a power of 2: determine what that divisor order is @ then simply shift values around @@ -184,13 +185,13 @@ UNWIND(.fnstart) THUMB( orr yl, yl, xh ) mov xh, xl, lsl ip mov xh, xh, lsr ip - mov pc, lr + ret lr @ eq -> division by 1: obvious enough... 9: moveq yl, xl moveq yh, xh moveq xh, #0 - moveq pc, lr + reteq lr UNWIND(.fnend) UNWIND(.fnstart) diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S index 64f6bc1a9..7848780e8 100755 --- a/arch/arm/lib/findbit.S +++ b/arch/arm/lib/findbit.S @@ -35,7 +35,7 @@ ENTRY(_find_first_zero_bit_le) 2: cmp r2, r1 @ any more? blo 1b 3: mov r0, r1 @ no free bits - mov pc, lr + ret lr ENDPROC(_find_first_zero_bit_le) /* @@ -76,7 +76,7 @@ ENTRY(_find_first_bit_le) 2: cmp r2, r1 @ any more? blo 1b 3: mov r0, r1 @ no free bits - mov pc, lr + ret lr ENDPROC(_find_first_bit_le) /* @@ -114,7 +114,7 @@ ENTRY(_find_first_zero_bit_be) 2: cmp r2, r1 @ any more? blo 1b 3: mov r0, r1 @ no free bits - mov pc, lr + ret lr ENDPROC(_find_first_zero_bit_be) ENTRY(_find_next_zero_bit_be) @@ -148,7 +148,7 @@ ENTRY(_find_first_bit_be) 2: cmp r2, r1 @ any more? blo 1b 3: mov r0, r1 @ no free bits - mov pc, lr + ret lr ENDPROC(_find_first_bit_be) ENTRY(_find_next_bit_be) @@ -192,5 +192,5 @@ ENDPROC(_find_next_bit_be) #endif cmp r1, r0 @ Clamp to maxbit movlo r0, r1 - mov pc, lr + ret lr diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 9b06bb41f..0f958e3d8 100755 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -36,7 +36,7 @@ ENTRY(__get_user_1) check_uaccess r0, 1, r1, r2, __get_user_bad 1: TUSER(ldrb) r2, [r0] mov r0, #0 - mov pc, lr + ret lr ENDPROC(__get_user_1) ENTRY(__get_user_2) @@ -56,20 +56,20 @@ rb .req r0 orr r2, rb, r2, lsl #8 #endif mov r0, #0 - mov pc, lr + ret lr ENDPROC(__get_user_2) ENTRY(__get_user_4) check_uaccess r0, 4, r1, r2, __get_user_bad 4: TUSER(ldr) r2, [r0] mov r0, #0 - mov pc, lr + ret lr ENDPROC(__get_user_4) __get_user_bad: mov r2, #0 mov r0, #-EFAULT - mov pc, lr + ret lr ENDPROC(__get_user_bad) .pushsection __ex_table, "a" diff --git a/arch/arm/lib/io-readsb.S b/arch/arm/lib/io-readsb.S index 9f4238987..c31b2f315 100755 --- a/arch/arm/lib/io-readsb.S +++ b/arch/arm/lib/io-readsb.S @@ -25,7 +25,7 @@ ENTRY(__raw_readsb) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr ands ip, r1, #3 bne .Linsb_align diff --git a/arch/arm/lib/io-readsl.S b/arch/arm/lib/io-readsl.S index 7a7430950..2ed86fa54 100755 --- a/arch/arm/lib/io-readsl.S +++ b/arch/arm/lib/io-readsl.S @@ -12,7 +12,7 @@ ENTRY(__raw_readsl) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr ands ip, r1, #3 bne 3f @@ -33,7 +33,7 @@ ENTRY(__raw_readsl) stmcsia r1!, {r3, ip} ldrne r3, [r0, #0] strne r3, [r1, #0] - mov pc, lr + ret lr 3: ldr r3, [r0] cmp ip, #2 @@ -75,5 +75,5 @@ ENTRY(__raw_readsl) strb r3, [r1, #1] 8: mov r3, ip, get_byte_0 strb r3, [r1, #0] - mov pc, lr + ret lr ENDPROC(__raw_readsl) diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S index 88487c8c4..413da9914 100755 --- a/arch/arm/lib/io-readsw-armv3.S +++ b/arch/arm/lib/io-readsw-armv3.S @@ -27,11 +27,11 @@ strb r3, [r1], #1 subs r2, r2, #1 - moveq pc, lr + reteq lr ENTRY(__raw_readsw) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr tst r1, #3 bne .Linsw_align diff --git a/arch/arm/lib/io-readsw-armv4.S b/arch/arm/lib/io-readsw-armv4.S index 1f393d425..d9a45e969 100755 --- a/arch/arm/lib/io-readsw-armv4.S +++ b/arch/arm/lib/io-readsw-armv4.S @@ -26,7 +26,7 @@ ENTRY(__raw_readsw) teq r2, #0 - moveq pc, lr + reteq lr tst r1, #3 bne .Linsw_align diff --git a/arch/arm/lib/io-writesb.S b/arch/arm/lib/io-writesb.S index 68b92f4ac..a46bbc9b1 100755 --- a/arch/arm/lib/io-writesb.S +++ b/arch/arm/lib/io-writesb.S @@ -45,7 +45,7 @@ ENTRY(__raw_writesb) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr ands ip, r1, #3 bne .Loutsb_align diff --git a/arch/arm/lib/io-writesl.S b/arch/arm/lib/io-writesl.S index d0d104a0d..4ea243598 100755 --- a/arch/arm/lib/io-writesl.S +++ b/arch/arm/lib/io-writesl.S @@ -12,7 +12,7 @@ ENTRY(__raw_writesl) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr ands ip, r1, #3 bne 3f @@ -33,7 +33,7 @@ ENTRY(__raw_writesl) ldrne r3, [r1, #0] strcs ip, [r0, #0] strne r3, [r0, #0] - mov pc, lr + ret lr 3: bic r1, r1, #3 ldr r3, [r1], #4 @@ -47,7 +47,7 @@ ENTRY(__raw_writesl) orr ip, ip, r3, lspush #16 str ip, [r0] bne 4b - mov pc, lr + ret lr 5: mov ip, r3, lspull #8 ldr r3, [r1], #4 @@ -55,7 +55,7 @@ ENTRY(__raw_writesl) orr ip, ip, r3, lspush #24 str ip, [r0] bne 5b - mov pc, lr + ret lr 6: mov ip, r3, lspull #24 ldr r3, [r1], #4 @@ -63,5 +63,5 @@ ENTRY(__raw_writesl) orr ip, ip, r3, lspush #8 str ip, [r0] bne 6b - mov pc, lr + ret lr ENDPROC(__raw_writesl) diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S index 49b800419..121789eb6 100755 --- a/arch/arm/lib/io-writesw-armv3.S +++ b/arch/arm/lib/io-writesw-armv3.S @@ -28,11 +28,11 @@ orr r3, r3, r3, lsl #16 str r3, [r0] subs r2, r2, #1 - moveq pc, lr + reteq lr ENTRY(__raw_writesw) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr tst r1, #3 bne .Loutsw_align diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S index ff4f71b57..269f90c51 100755 --- a/arch/arm/lib/io-writesw-armv4.S +++ b/arch/arm/lib/io-writesw-armv4.S @@ -31,7 +31,7 @@ ENTRY(__raw_writesw) teq r2, #0 - moveq pc, lr + reteq lr ands r3, r1, #3 bne .Loutsw_align @@ -96,5 +96,5 @@ ENTRY(__raw_writesw) tst r2, #1 3: movne ip, r3, lsr #8 strneh ip, [r0] - mov pc, lr + ret lr ENDPROC(__raw_writesw) diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S index c562f6497..947567ff6 100755 --- a/arch/arm/lib/lib1funcs.S +++ b/arch/arm/lib/lib1funcs.S @@ -210,7 +210,7 @@ ENTRY(__aeabi_uidiv) UNWIND(.fnstart) subs r2, r1, #1 - moveq pc, lr + reteq lr bcc Ldiv0 cmp r0, r1 bls 11f @@ -220,16 +220,16 @@ UNWIND(.fnstart) ARM_DIV_BODY r0, r1, r2, r3 mov r0, r2 - mov pc, lr + ret lr 11: moveq r0, #1 movne r0, #0 - mov pc, lr + ret lr 12: ARM_DIV2_ORDER r1, r2 mov r0, r0, lsr r2 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__udivsi3) @@ -244,11 +244,11 @@ UNWIND(.fnstart) moveq r0, #0 tsthi r1, r2 @ see if divisor is power of 2 andeq r0, r0, r2 - movls pc, lr + retls lr ARM_MOD_BODY r0, r1, r2, r3 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__umodsi3) @@ -274,23 +274,23 @@ UNWIND(.fnstart) cmp ip, #0 rsbmi r0, r0, #0 - mov pc, lr + ret lr 10: teq ip, r0 @ same sign ? rsbmi r0, r0, #0 - mov pc, lr + ret lr 11: movlo r0, #0 moveq r0, ip, asr #31 orreq r0, r0, #1 - mov pc, lr + ret lr 12: ARM_DIV2_ORDER r1, r2 cmp ip, #0 mov r0, r3, lsr r2 rsbmi r0, r0, #0 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__divsi3) @@ -315,7 +315,7 @@ UNWIND(.fnstart) 10: cmp ip, #0 rsbmi r0, r0, #0 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__modsi3) @@ -331,7 +331,7 @@ UNWIND(.save {r0, r1, ip, lr} ) ldmfd sp!, {r1, r2, ip, lr} mul r3, r0, r2 sub r1, r1, r3 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__aeabi_uidivmod) @@ -344,7 +344,7 @@ UNWIND(.save {r0, r1, ip, lr} ) ldmfd sp!, {r1, r2, ip, lr} mul r3, r0, r2 sub r1, r1, r3 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__aeabi_idivmod) diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S index f83d44914..922dcd88b 100755 --- a/arch/arm/lib/lshrdi3.S +++ b/arch/arm/lib/lshrdi3.S @@ -27,6 +27,7 @@ Boston, MA 02110-1301, USA. */ #include +#include #ifdef __ARMEB__ #define al r1 @@ -47,7 +48,7 @@ ENTRY(__aeabi_llsr) THUMB( lslmi r3, ah, ip ) THUMB( orrmi al, al, r3 ) mov ah, ah, lsr r2 - mov pc, lr + ret lr ENDPROC(__lshrdi3) ENDPROC(__aeabi_llsr) diff --git a/arch/arm/lib/memchr.S b/arch/arm/lib/memchr.S index 1da86991d..74a5bed6d 100755 --- a/arch/arm/lib/memchr.S +++ b/arch/arm/lib/memchr.S @@ -22,5 +22,5 @@ ENTRY(memchr) bne 1b sub r0, r0, #1 2: movne r0, #0 - mov pc, lr + ret lr ENDPROC(memchr) diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S index 94b0650ea..671455c85 100755 --- a/arch/arm/lib/memset.S +++ b/arch/arm/lib/memset.S @@ -110,7 +110,7 @@ ENTRY(memset) strneb r1, [ip], #1 tst r2, #1 strneb r1, [ip], #1 - mov pc, lr + ret lr 6: subs r2, r2, #4 @ 1 do we have enough blt 5b @ 1 bytes to align with? diff --git a/arch/arm/lib/memzero.S b/arch/arm/lib/memzero.S index 3fbdef5f8..385ccb306 100755 --- a/arch/arm/lib/memzero.S +++ b/arch/arm/lib/memzero.S @@ -121,5 +121,5 @@ ENTRY(__memzero) strneb r2, [r0], #1 @ 1 tst r1, #1 @ 1 a byte left over strneb r2, [r0], #1 @ 1 - mov pc, lr @ 1 + ret lr @ 1 ENDPROC(__memzero) diff --git a/arch/arm/lib/muldi3.S b/arch/arm/lib/muldi3.S index 36c91b495..204305956 100755 --- a/arch/arm/lib/muldi3.S +++ b/arch/arm/lib/muldi3.S @@ -11,6 +11,7 @@ */ #include +#include #ifdef __ARMEB__ #define xh r0 @@ -41,7 +42,7 @@ ENTRY(__aeabi_lmul) adc xh, xh, yh, lsr #16 adds xl, xl, ip, lsl #16 adc xh, xh, ip, lsr #16 - mov pc, lr + ret lr ENDPROC(__muldi3) ENDPROC(__aeabi_lmul) diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 3d73dcb95..38d660d37 100755 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -36,7 +36,7 @@ ENTRY(__put_user_1) check_uaccess r0, 1, r1, ip, __put_user_bad 1: TUSER(strb) r2, [r0] mov r0, #0 - mov pc, lr + ret lr ENDPROC(__put_user_1) ENTRY(__put_user_2) @@ -60,14 +60,14 @@ ENTRY(__put_user_2) #endif #endif /* CONFIG_THUMB2_KERNEL */ mov r0, #0 - mov pc, lr + ret lr ENDPROC(__put_user_2) ENTRY(__put_user_4) check_uaccess r0, 4, r1, ip, __put_user_bad 4: TUSER(str) r2, [r0] mov r0, #0 - mov pc, lr + ret lr ENDPROC(__put_user_4) ENTRY(__put_user_8) @@ -80,12 +80,12 @@ ENTRY(__put_user_8) 6: TUSER(str) r3, [r0] #endif mov r0, #0 - mov pc, lr + ret lr ENDPROC(__put_user_8) __put_user_bad: mov r0, #-EFAULT - mov pc, lr + ret lr ENDPROC(__put_user_bad) .pushsection __ex_table, "a" diff --git a/arch/arm/lib/strchr.S b/arch/arm/lib/strchr.S index d8f2a1c1a..013d64c71 100755 --- a/arch/arm/lib/strchr.S +++ b/arch/arm/lib/strchr.S @@ -23,5 +23,5 @@ ENTRY(strchr) teq r2, r1 movne r0, #0 subeq r0, r0, #1 - mov pc, lr + ret lr ENDPROC(strchr) diff --git a/arch/arm/lib/strrchr.S b/arch/arm/lib/strrchr.S index 302f20cd2..3cec1c748 100755 --- a/arch/arm/lib/strrchr.S +++ b/arch/arm/lib/strrchr.S @@ -22,5 +22,5 @@ ENTRY(strrchr) teq r2, #0 bne 1b mov r0, r3 - mov pc, lr + ret lr ENDPROC(strrchr) diff --git a/arch/arm/lib/ucmpdi2.S b/arch/arm/lib/ucmpdi2.S index f0df6a91d..ad4a63091 100755 --- a/arch/arm/lib/ucmpdi2.S +++ b/arch/arm/lib/ucmpdi2.S @@ -11,6 +11,7 @@ */ #include +#include #ifdef __ARMEB__ #define xh r0 @@ -31,7 +32,7 @@ ENTRY(__ucmpdi2) movlo r0, #0 moveq r0, #1 movhi r0, #2 - mov pc, lr + ret lr ENDPROC(__ucmpdi2) @@ -44,7 +45,7 @@ ENTRY(__aeabi_ulcmp) movlo r0, #-1 moveq r0, #0 movhi r0, #1 - mov pc, lr + ret lr ENDPROC(__aeabi_ulcmp) diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S index d4e9316ec..a5336a5e2 100755 --- a/arch/arm/mach-davinci/sleep.S +++ b/arch/arm/mach-davinci/sleep.S @@ -213,7 +213,7 @@ ddr2clk_stop_done: cmp ip, r0 bne ddr2clk_stop_done - mov pc, lr + ret lr ENDPROC(davinci_ddr_psc_config) CACHE_FLUSH: diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S new file mode 100644 index 000000000..74b50f198 --- /dev/null +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -0,0 +1,344 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include "hardware.h" + +/* + * ==================== low level suspend ==================== + * + * Better to follow below rules to use ARM registers: + * r0: pm_info structure address; + * r1 ~ r4: for saving pm_info members; + * r5 ~ r10: free registers; + * r11: io base address. + * + * suspend ocram space layout: + * ======================== high address ====================== + * . + * . + * . + * ^ + * ^ + * ^ + * imx6_suspend code + * PM_INFO structure(imx6_cpu_pm_info) + * ======================== low address ======================= + */ + +/* + * Below offsets are based on struct imx6_cpu_pm_info + * which defined in arch/arm/mach-imx/pm-imx6q.c, this + * structure contains necessary pm info for low level + * suspend related code. + */ +#define PM_INFO_PBASE_OFFSET 0x0 +#define PM_INFO_RESUME_ADDR_OFFSET 0x4 +#define PM_INFO_CPU_TYPE_OFFSET 0x8 +#define PM_INFO_PM_INFO_SIZE_OFFSET 0xC +#define PM_INFO_MX6Q_MMDC_P_OFFSET 0x10 +#define PM_INFO_MX6Q_MMDC_V_OFFSET 0x14 +#define PM_INFO_MX6Q_SRC_P_OFFSET 0x18 +#define PM_INFO_MX6Q_SRC_V_OFFSET 0x1C +#define PM_INFO_MX6Q_IOMUXC_P_OFFSET 0x20 +#define PM_INFO_MX6Q_IOMUXC_V_OFFSET 0x24 +#define PM_INFO_MX6Q_CCM_P_OFFSET 0x28 +#define PM_INFO_MX6Q_CCM_V_OFFSET 0x2C +#define PM_INFO_MX6Q_GPC_P_OFFSET 0x30 +#define PM_INFO_MX6Q_GPC_V_OFFSET 0x34 +#define PM_INFO_MX6Q_L2_P_OFFSET 0x38 +#define PM_INFO_MX6Q_L2_V_OFFSET 0x3C +#define PM_INFO_MMDC_IO_NUM_OFFSET 0x40 +#define PM_INFO_MMDC_IO_VAL_OFFSET 0x44 + +#define MX6Q_SRC_GPR1 0x20 +#define MX6Q_SRC_GPR2 0x24 +#define MX6Q_MMDC_MAPSR 0x404 +#define MX6Q_MMDC_MPDGCTRL0 0x83c +#define MX6Q_GPC_IMR1 0x08 +#define MX6Q_GPC_IMR2 0x0c +#define MX6Q_GPC_IMR3 0x10 +#define MX6Q_GPC_IMR4 0x14 +#define MX6Q_CCM_CCR 0x0 + + .align 3 + + .macro sync_l2_cache + + /* sync L2 cache to drain L2's buffers to DRAM. */ +#ifdef CONFIG_CACHE_L2X0 + ldr r11, [r0, #PM_INFO_MX6Q_L2_V_OFFSET] + mov r6, #0x0 + str r6, [r11, #L2X0_CACHE_SYNC] +1: + ldr r6, [r11, #L2X0_CACHE_SYNC] + ands r6, r6, #0x1 + bne 1b +#endif + + .endm + + .macro resume_mmdc + + /* restore MMDC IO */ + cmp r5, #0x0 + ldreq r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] + ldrne r11, [r0, #PM_INFO_MX6Q_IOMUXC_P_OFFSET] + + ldr r6, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] + ldr r7, =PM_INFO_MMDC_IO_VAL_OFFSET + add r7, r7, r0 +1: + ldr r8, [r7], #0x4 + ldr r9, [r7], #0x4 + str r9, [r11, r8] + subs r6, r6, #0x1 + bne 1b + + cmp r5, #0x0 + ldreq r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET] + ldrne r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET] + + cmp r3, #MXC_CPU_IMX6SL + bne 4f + + /* reset read FIFO, RST_RD_FIFO */ + ldr r7, =MX6Q_MMDC_MPDGCTRL0 + ldr r6, [r11, r7] + orr r6, r6, #(1 << 31) + str r6, [r11, r7] +2: + ldr r6, [r11, r7] + ands r6, r6, #(1 << 31) + bne 2b + + /* reset FIFO a second time */ + ldr r6, [r11, r7] + orr r6, r6, #(1 << 31) + str r6, [r11, r7] +3: + ldr r6, [r11, r7] + ands r6, r6, #(1 << 31) + bne 3b +4: + /* let DDR out of self-refresh */ + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + bic r7, r7, #(1 << 21) + str r7, [r11, #MX6Q_MMDC_MAPSR] +5: + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + ands r7, r7, #(1 << 25) + bne 5b + + /* enable DDR auto power saving */ + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + bic r7, r7, #0x1 + str r7, [r11, #MX6Q_MMDC_MAPSR] + + .endm + +ENTRY(imx6_suspend) + ldr r1, [r0, #PM_INFO_PBASE_OFFSET] + ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET] + ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET] + ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET] + + /* + * counting the resume address in iram + * to set it in SRC register. + */ + ldr r6, =imx6_suspend + ldr r7, =resume + sub r7, r7, r6 + add r8, r1, r4 + add r9, r8, r7 + + /* + * make sure TLB contain the addr we want, + * as we will access them after MMDC IO floated. + */ + + ldr r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET] + ldr r6, [r11, #0x0] + ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] + ldr r6, [r11, #0x0] + + /* use r11 to store the IO address */ + ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET] + /* store physical resume addr and pm_info address. */ + str r9, [r11, #MX6Q_SRC_GPR1] + str r1, [r11, #MX6Q_SRC_GPR2] + + /* need to sync L2 cache before DSM. */ + sync_l2_cache + + ldr r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET] + /* + * put DDR explicitly into self-refresh and + * disable automatic power savings. + */ + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + orr r7, r7, #0x1 + str r7, [r11, #MX6Q_MMDC_MAPSR] + + /* make the DDR explicitly enter self-refresh. */ + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + orr r7, r7, #(1 << 21) + str r7, [r11, #MX6Q_MMDC_MAPSR] + +poll_dvfs_set: + ldr r7, [r11, #MX6Q_MMDC_MAPSR] + ands r7, r7, #(1 << 25) + beq poll_dvfs_set + + ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] + ldr r6, =0x0 + ldr r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] + ldr r8, =PM_INFO_MMDC_IO_VAL_OFFSET + add r8, r8, r0 + /* i.MX6SL's last 3 IOs need special setting */ + cmp r3, #MXC_CPU_IMX6SL + subeq r7, r7, #0x3 +set_mmdc_io_lpm: + ldr r9, [r8], #0x8 + str r6, [r11, r9] + subs r7, r7, #0x1 + bne set_mmdc_io_lpm + + cmp r3, #MXC_CPU_IMX6SL + bne set_mmdc_io_lpm_done + ldr r6, =0x1000 + ldr r9, [r8], #0x8 + str r6, [r11, r9] + ldr r9, [r8], #0x8 + str r6, [r11, r9] + ldr r6, =0x80000 + ldr r9, [r8] + str r6, [r11, r9] +set_mmdc_io_lpm_done: + + /* + * mask all GPC interrupts before + * enabling the RBC counters to + * avoid the counter starting too + * early if an interupt is already + * pending. + */ + ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] + ldr r6, [r11, #MX6Q_GPC_IMR1] + ldr r7, [r11, #MX6Q_GPC_IMR2] + ldr r8, [r11, #MX6Q_GPC_IMR3] + ldr r9, [r11, #MX6Q_GPC_IMR4] + + ldr r10, =0xffffffff + str r10, [r11, #MX6Q_GPC_IMR1] + str r10, [r11, #MX6Q_GPC_IMR2] + str r10, [r11, #MX6Q_GPC_IMR3] + str r10, [r11, #MX6Q_GPC_IMR4] + + /* + * enable the RBC bypass counter here + * to hold off the interrupts. RBC counter + * = 32 (1ms), Minimum RBC delay should be + * 400us for the analog LDOs to power down. + */ + ldr r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET] + ldr r10, [r11, #MX6Q_CCM_CCR] + bic r10, r10, #(0x3f << 21) + orr r10, r10, #(0x20 << 21) + str r10, [r11, #MX6Q_CCM_CCR] + + /* enable the counter. */ + ldr r10, [r11, #MX6Q_CCM_CCR] + orr r10, r10, #(0x1 << 27) + str r10, [r11, #MX6Q_CCM_CCR] + + /* unmask all the GPC interrupts. */ + ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] + str r6, [r11, #MX6Q_GPC_IMR1] + str r7, [r11, #MX6Q_GPC_IMR2] + str r8, [r11, #MX6Q_GPC_IMR3] + str r9, [r11, #MX6Q_GPC_IMR4] + + /* + * now delay for a short while (3usec) + * ARM is at 1GHz at this point + * so a short loop should be enough. + * this delay is required to ensure that + * the RBC counter can start counting in + * case an interrupt is already pending + * or in case an interrupt arrives just + * as ARM is about to assert DSM_request. + */ + ldr r6, =2000 +rbc_loop: + subs r6, r6, #0x1 + bne rbc_loop + + /* Zzz, enter stop mode */ + wfi + nop + nop + nop + nop + + /* + * run to here means there is pending + * wakeup source, system should auto + * resume, we need to restore MMDC IO first + */ + mov r5, #0x0 + resume_mmdc + + /* return to suspend finish */ + ret lr + +resume: + /* invalidate L1 I-cache first */ + mov r6, #0x0 + mcr p15, 0, r6, c7, c5, 0 + mcr p15, 0, r6, c7, c5, 6 + /* enable the Icache and branch prediction */ + mov r6, #0x1800 + mcr p15, 0, r6, c1, c0, 0 + isb + + /* get physical resume address from pm_info. */ + ldr lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET] + /* clear core0's entry and parameter */ + ldr r11, [r0, #PM_INFO_MX6Q_SRC_P_OFFSET] + mov r7, #0x0 + str r7, [r11, #MX6Q_SRC_GPR1] + str r7, [r11, #MX6Q_SRC_GPR2] + + ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET] + mov r5, #0x1 + resume_mmdc + + ret lr +ENDPROC(imx6_suspend) + +/* + * The following code must assume it is running from physical address + * where absolute virtual addresses to the data section have to be + * turned into relative ones. + */ + +ENTRY(v7_cpu_resume) + bl v7_invalidate_l1 +#ifdef CONFIG_CACHE_L2X0 + bl l2c310_early_resume +#endif + b cpu_resume +ENDPROC(v7_cpu_resume) diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S new file mode 100644 index 000000000..7c91ddb6f --- /dev/null +++ b/arch/arm/mach-mvebu/headsmp-a9.S @@ -0,0 +1,35 @@ +/* + * SMP support: Entry point for secondary CPUs of Marvell EBU + * Cortex-A9 based SOCs (Armada 375 and Armada 38x). + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include + + __CPUINIT +#define CPU_RESUME_ADDR_REG 0xf10182d4 + +.global armada_375_smp_cpu1_enable_code_start +.global armada_375_smp_cpu1_enable_code_end + +armada_375_smp_cpu1_enable_code_start: + ldr r0, [pc, #4] + ldr r1, [r0] + ret r1 + .word CPU_RESUME_ADDR_REG +armada_375_smp_cpu1_enable_code_end: + +ENTRY(mvebu_cortex_a9_secondary_startup) + bl v7_invalidate_l1 + b secondary_startup +ENDPROC(mvebu_cortex_a9_secondary_startup) diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 88ff83a09..e86a0fb74 100755 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -10,6 +10,7 @@ */ #include +#include #include #include #include @@ -330,7 +331,7 @@ ENDPROC(omap4_cpu_resume) #ifndef CONFIG_OMAP4_ERRATA_I688 ENTRY(omap_bus_sync) - mov pc, lr + ret lr ENDPROC(omap_bus_sync) #endif diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index 680a7c56c..2c88ff2d0 100755 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -101,7 +101,7 @@ i_dll_wait: i_dll_delay: subs r4, r4, #0x1 bne i_dll_delay - mov pc, lr + ret lr /* * shift up or down voltage, use R9 as input to tell level. @@ -125,7 +125,7 @@ volt_delay: ldr r7, [r3] @ get timer value cmp r5, r7 @ time up? bhi volt_delay @ not yet->branch - mov pc, lr @ back to caller. + ret lr @ back to caller. omap242x_sdi_cm_clksel2_pll: .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2) @@ -220,7 +220,7 @@ volt_delay_c: ldr r7, [r10] @ get timer value cmp r8, r7 @ time up? bhi volt_delay_c @ not yet->branch - mov pc, lr @ back to caller + ret lr @ back to caller omap242x_srs_cm_clksel2_pll: .word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2) diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index a1e9edd67..d5deb9761 100755 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -101,7 +101,7 @@ i_dll_wait: i_dll_delay: subs r4, r4, #0x1 bne i_dll_delay - mov pc, lr + ret lr /* * shift up or down voltage, use R9 as input to tell level. @@ -125,7 +125,7 @@ volt_delay: ldr r7, [r3] @ get timer value cmp r5, r7 @ time up? bhi volt_delay @ not yet->branch - mov pc, lr @ back to caller. + ret lr @ back to caller. omap243x_sdi_cm_clksel2_pll: .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2) @@ -220,7 +220,7 @@ volt_delay_c: ldr r7, [r10] @ get timer value cmp r8, r7 @ time up? bhi volt_delay_c @ not yet->branch - mov pc, lr @ back to caller + ret lr @ back to caller omap243x_srs_cm_clksel2_pll: .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2) diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S index 324d25a48..81591491a 100755 --- a/arch/arm/mach-pxa/mioa701_bootresume.S +++ b/arch/arm/mach-pxa/mioa701_bootresume.S @@ -29,7 +29,7 @@ ENTRY(mioa701_jumpaddr) str r1, [r0] @ Early disable resume for next boot ldr r0, mioa701_jumpaddr @ (Murphy's Law) ldr r0, [r0] - mov pc, r0 + ret r0 2: ENTRY(mioa701_bootstrap_lg) diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S index 29f5f5c18..eab1645bb 100755 --- a/arch/arm/mach-pxa/standby.S +++ b/arch/arm/mach-pxa/standby.S @@ -29,7 +29,7 @@ ENTRY(pxa_cpu_standby) .align 5 1: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby str r1, [r0] @ make sure PSSR_PH/STS are clear - mov pc, lr + ret lr #endif @@ -108,7 +108,7 @@ ENTRY(pm_enter_standby_start) bic r0, r0, #0x20000000 str r0, [r1, #PXA3_DMCIER] - mov pc, lr + ret lr ENTRY(pm_enter_standby_end) #endif diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S index dd47c8fa0..ab9f2a065 100755 --- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S @@ -66,4 +66,4 @@ s3c2410_do_sleep: streq r8, [r5] @ SDRAM power-down config streq r9, [r6] @ CPU sleep 1: beq 1b - mov pc, r14 + ret lr diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2412.S b/arch/arm/mach-s3c24xx/sleep-s3c2412.S index 5adaceb7d..6bf5b4d87 100755 --- a/arch/arm/mach-s3c24xx/sleep-s3c2412.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2412.S @@ -65,4 +65,4 @@ s3c2412_sleep_enter1: strne r9, [r3] bne s3c2412_sleep_enter1 - mov pc, r14 + ret lr diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S index e505befe5..2f0c58836 100755 --- a/arch/arm/mm/cache-fa.S +++ b/arch/arm/mm/cache-fa.S @@ -15,6 +15,7 @@ */ #include #include +#include #include #include @@ -45,7 +46,7 @@ ENTRY(fa_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(fa_flush_icache_all) /* @@ -71,7 +72,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB mcrne p15, 0, ip, c7, c10, 4 @ drain write buffer mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -99,7 +100,7 @@ ENTRY(fa_flush_user_cache_range) mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB mcrne p15, 0, ip, c7, c10, 4 @ data write barrier mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -135,7 +136,7 @@ ENTRY(fa_coherent_user_range) mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB mcr p15, 0, r0, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c7, c5, 4 @ prefetch flush - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -155,7 +156,7 @@ ENTRY(fa_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -181,7 +182,7 @@ fa_dma_inv_range: blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -199,7 +200,7 @@ fa_dma_clean_range: blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * dma_flush_range(start,end) @@ -214,7 +215,7 @@ ENTRY(fa_dma_flush_range) blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -237,7 +238,7 @@ ENDPROC(fa_dma_map_area) * - dir - DMA direction */ ENTRY(fa_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(fa_dma_unmap_area) .globl fa_flush_kern_cache_louis diff --git a/arch/arm/mm/cache-nop.S b/arch/arm/mm/cache-nop.S new file mode 100644 index 000000000..f1cc98610 --- /dev/null +++ b/arch/arm/mm/cache-nop.S @@ -0,0 +1,51 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#include "proc-macros.S" + +ENTRY(nop_flush_icache_all) + ret lr +ENDPROC(nop_flush_icache_all) + + .globl nop_flush_kern_cache_all + .equ nop_flush_kern_cache_all, nop_flush_icache_all + + .globl nop_flush_kern_cache_louis + .equ nop_flush_kern_cache_louis, nop_flush_icache_all + + .globl nop_flush_user_cache_all + .equ nop_flush_user_cache_all, nop_flush_icache_all + + .globl nop_flush_user_cache_range + .equ nop_flush_user_cache_range, nop_flush_icache_all + + .globl nop_coherent_kern_range + .equ nop_coherent_kern_range, nop_flush_icache_all + +ENTRY(nop_coherent_user_range) + mov r0, 0 + ret lr +ENDPROC(nop_coherent_user_range) + + .globl nop_flush_kern_dcache_area + .equ nop_flush_kern_dcache_area, nop_flush_icache_all + + .globl nop_dma_flush_range + .equ nop_dma_flush_range, nop_flush_icache_all + + .globl nop_dma_map_area + .equ nop_dma_map_area, nop_flush_icache_all + + .globl nop_dma_unmap_area + .equ nop_dma_unmap_area, nop_flush_icache_all + + __INITDATA + + @ define struct cpu_cache_fns (see and proc-macros.S) + define_cache_functions nop diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S index a7ba68f59..91e3adf15 100755 --- a/arch/arm/mm/cache-v4.S +++ b/arch/arm/mm/cache-v4.S @@ -9,6 +9,7 @@ */ #include #include +#include #include #include "proc-macros.S" @@ -18,7 +19,7 @@ * Unconditionally clean and invalidate the entire icache. */ ENTRY(v4_flush_icache_all) - mov pc, lr + ret lr ENDPROC(v4_flush_icache_all) /* @@ -40,7 +41,7 @@ ENTRY(v4_flush_kern_cache_all) #ifdef CONFIG_CPU_CP15 mov r0, #0 mcr p15, 0, r0, c7, c7, 0 @ flush ID cache - mov pc, lr + ret lr #else /* FALLTHROUGH */ #endif @@ -59,7 +60,7 @@ ENTRY(v4_flush_user_cache_range) #ifdef CONFIG_CPU_CP15 mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ flush ID cache - mov pc, lr + ret lr #else /* FALLTHROUGH */ #endif @@ -89,7 +90,7 @@ ENTRY(v4_coherent_kern_range) */ ENTRY(v4_coherent_user_range) mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -116,7 +117,7 @@ ENTRY(v4_dma_flush_range) mov r0, #0 mcr p15, 0, r0, c7, c7, 0 @ flush ID cache #endif - mov pc, lr + ret lr /* * dma_unmap_area(start, size, dir) @@ -136,7 +137,7 @@ ENTRY(v4_dma_unmap_area) * - dir - DMA direction */ ENTRY(v4_dma_map_area) - mov pc, lr + ret lr ENDPROC(v4_dma_unmap_area) ENDPROC(v4_dma_map_area) diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S index cd4945321..2522f8c8f 100755 --- a/arch/arm/mm/cache-v4wb.S +++ b/arch/arm/mm/cache-v4wb.S @@ -9,6 +9,7 @@ */ #include #include +#include #include #include #include "proc-macros.S" @@ -58,7 +59,7 @@ flush_base: ENTRY(v4wb_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(v4wb_flush_icache_all) /* @@ -94,7 +95,7 @@ __flush_whole_cache: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -122,7 +123,7 @@ ENTRY(v4wb_flush_user_cache_range) blo 1b tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -170,7 +171,7 @@ ENTRY(v4wb_coherent_user_range) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* @@ -195,7 +196,7 @@ v4wb_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -212,7 +213,7 @@ v4wb_dma_clean_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -248,7 +249,7 @@ ENDPROC(v4wb_dma_map_area) * - dir - DMA direction */ ENTRY(v4wb_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(v4wb_dma_unmap_area) .globl v4wb_flush_kern_cache_louis diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S index 11e5e5838..a0982ce49 100755 --- a/arch/arm/mm/cache-v4wt.S +++ b/arch/arm/mm/cache-v4wt.S @@ -13,6 +13,7 @@ */ #include #include +#include #include #include "proc-macros.S" @@ -48,7 +49,7 @@ ENTRY(v4wt_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(v4wt_flush_icache_all) /* @@ -71,7 +72,7 @@ __flush_whole_cache: tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -94,7 +95,7 @@ ENTRY(v4wt_flush_user_cache_range) add r0, r0, #CACHE_DLINESIZE cmp r0, r1 blo 1b - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -126,7 +127,7 @@ ENTRY(v4wt_coherent_user_range) cmp r0, r1 blo 1b mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -160,7 +161,7 @@ v4wt_dma_inv_range: add r0, r0, #CACHE_DLINESIZE cmp r0, r1 blo 1b - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -192,7 +193,7 @@ ENTRY(v4wt_dma_unmap_area) * - dir - DMA direction */ ENTRY(v4wt_dma_map_area) - mov pc, lr + ret lr ENDPROC(v4wt_dma_unmap_area) ENDPROC(v4wt_dma_map_area) diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 7a3d3d8d9..11da0f50a 100755 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -51,7 +51,7 @@ ENTRY(v6_flush_icache_all) #else mcr p15, 0, r0, c7, c5, 0 @ invalidate I-cache #endif - mov pc, lr + ret lr ENDPROC(v6_flush_icache_all) /* @@ -73,7 +73,7 @@ ENTRY(v6_flush_kern_cache_all) #else mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate #endif - mov pc, lr + ret lr /* * v6_flush_cache_all() @@ -98,7 +98,7 @@ ENTRY(v6_flush_user_cache_all) * - we have a VIPT cache. */ ENTRY(v6_flush_user_cache_range) - mov pc, lr + ret lr /* * v6_coherent_kern_range(start,end) @@ -150,7 +150,7 @@ ENTRY(v6_coherent_user_range) #else mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB #endif - mov pc, lr + ret lr /* * Fault handling for the cache operation above. If the virtual address in r0 @@ -158,7 +158,7 @@ ENTRY(v6_coherent_user_range) */ 9001: mov r0, #-EFAULT - mov pc, lr + ret lr UNWIND(.fnend ) ENDPROC(v6_coherent_user_range) ENDPROC(v6_coherent_kern_range) @@ -188,7 +188,7 @@ ENTRY(v6_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c10, 4 #endif - mov pc, lr + ret lr /* @@ -239,7 +239,7 @@ v6_dma_inv_range: blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * v6_dma_clean_range(start,end) @@ -262,7 +262,7 @@ v6_dma_clean_range: blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr /* * v6_dma_flush_range(start,end) @@ -295,7 +295,7 @@ ENTRY(v6_dma_flush_range) blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer - mov pc, lr + ret lr #ifdef CONFIG_CACHE_FLUSH_RANGE_LIMIT v6_dma_flush_dcache_all: @@ -340,7 +340,7 @@ ENTRY(v6_dma_unmap_area) teq r2, #DMA_TO_DEVICE bne v6_dma_inv_range #endif - mov pc, lr + ret lr ENDPROC(v6_dma_unmap_area) .globl v6_flush_kern_cache_louis diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index a84e0536c..30dd47c56 100755 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -61,7 +61,7 @@ ENTRY(v7_invalidate_l1) bgt 1b dsb isb - mov pc, lr + ret lr ENDPROC(v7_invalidate_l1) /* @@ -76,7 +76,7 @@ ENTRY(v7_flush_icache_all) mov r0, #0 ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate - mov pc, lr + ret lr ENDPROC(v7_flush_icache_all) /* @@ -94,7 +94,7 @@ ENTRY(v7_flush_dcache_louis) ALT_UP(ands r3, r0, #(7 << 27)) @ extract LoUU from clidr #ifdef CONFIG_ARM_ERRATA_643719 ALT_SMP(mrceq p15, 0, r2, c0, c0, 0) @ read main ID register - ALT_UP(moveq pc, lr) @ LoUU is zero, so nothing to do + ALT_UP(reteq lr) @ LoUU is zero, so nothing to do ldreq r1, =0x410fc090 @ ID of ARM Cortex A9 r0p? biceq r2, r2, #0x0000000f @ clear minor revision number teqeq r2, r1 @ test for errata affected core and if so... @@ -102,7 +102,7 @@ ENTRY(v7_flush_dcache_louis) #endif ALT_SMP(mov r3, r3, lsr #20) @ r3 = LoUIS * 2 ALT_UP(mov r3, r3, lsr #26) @ r3 = LoUU * 2 - moveq pc, lr @ return if level == 0 + reteq lr @ return if level == 0 mov r10, #0 @ r10 (starting level) = 0 b flush_levels @ start flushing cache levels ENDPROC(v7_flush_dcache_louis) @@ -168,7 +168,7 @@ finished: mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr dsb isb - mov pc, lr + ret lr ENDPROC(v7_flush_dcache_all) /* @@ -191,7 +191,7 @@ ENTRY(v7_flush_kern_cache_all) ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} ) THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} ) - mov pc, lr + ret lr ENDPROC(v7_flush_kern_cache_all) /* @@ -209,7 +209,7 @@ ENTRY(v7_flush_kern_cache_louis) ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} ) THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} ) - mov pc, lr + ret lr ENDPROC(v7_flush_kern_cache_louis) /* @@ -235,7 +235,7 @@ ENTRY(v7_flush_user_cache_all) * - we have a VIPT cache. */ ENTRY(v7_flush_user_cache_range) - mov pc, lr + ret lr ENDPROC(v7_flush_user_cache_all) ENDPROC(v7_flush_user_cache_range) @@ -296,7 +296,7 @@ ENTRY(v7_coherent_user_range) ALT_UP(mcr p15, 0, r0, c7, c5, 6) @ invalidate BTB dsb isb - mov pc, lr + ret lr /* * Fault handling for the cache operation above. If the virtual address in r0 @@ -307,7 +307,7 @@ ENTRY(v7_coherent_user_range) dsb #endif mov r0, #-EFAULT - mov pc, lr + ret lr UNWIND(.fnend ) ENDPROC(v7_coherent_kern_range) ENDPROC(v7_coherent_user_range) @@ -336,7 +336,7 @@ ENTRY(v7_flush_kern_dcache_area) cmp r0, r1 blo 1b dsb - mov pc, lr + ret lr ENDPROC(v7_flush_kern_dcache_area) /* @@ -369,7 +369,7 @@ v7_dma_inv_range: cmp r0, r1 blo 1b dsb - mov pc, lr + ret lr ENDPROC(v7_dma_inv_range) /* @@ -391,7 +391,7 @@ v7_dma_clean_range: cmp r0, r1 blo 1b dsb - mov pc, lr + ret lr ENDPROC(v7_dma_clean_range) /* @@ -413,7 +413,7 @@ ENTRY(v7_dma_flush_range) cmp r0, r1 blo 1b dsb - mov pc, lr + ret lr ENDPROC(v7_dma_flush_range) /* @@ -439,7 +439,7 @@ ENTRY(v7_dma_unmap_area) add r1, r1, r0 teq r2, #DMA_TO_DEVICE bne v7_dma_inv_range - mov pc, lr + ret lr ENDPROC(v7_dma_unmap_area) __INITDATA diff --git a/arch/arm/mm/l2c-l2x0-resume.S b/arch/arm/mm/l2c-l2x0-resume.S new file mode 100644 index 000000000..fda415e4c --- /dev/null +++ b/arch/arm/mm/l2c-l2x0-resume.S @@ -0,0 +1,59 @@ +/* + * L2C-310 early resume code. This can be used by platforms to restore + * the settings of their L2 cache controller before restoring the + * processor state. + * + * This code can only be used to if you are running in the secure world. + */ +#include +#include +#include + + .text + +ENTRY(l2c310_early_resume) + adr r0, 1f + ldr r2, [r0] + add r0, r2, r0 + + ldmia r0, {r1, r2, r3, r4, r5, r6, r7, r8} + @ r1 = phys address of L2C-310 controller + @ r2 = aux_ctrl + @ r3 = tag_latency + @ r4 = data_latency + @ r5 = filter_start + @ r6 = filter_end + @ r7 = prefetch_ctrl + @ r8 = pwr_ctrl + + @ Check that the address has been initialised + teq r1, #0 + reteq lr + + @ The prefetch and power control registers are revision dependent + @ and can be written whether or not the L2 cache is enabled + ldr r0, [r1, #L2X0_CACHE_ID] + and r0, r0, #L2X0_CACHE_ID_RTL_MASK + cmp r0, #L310_CACHE_ID_RTL_R2P0 + strcs r7, [r1, #L310_PREFETCH_CTRL] + cmp r0, #L310_CACHE_ID_RTL_R3P0 + strcs r8, [r1, #L310_POWER_CTRL] + + @ Don't setup the L2 cache if it is already enabled + ldr r0, [r1, #L2X0_CTRL] + tst r0, #L2X0_CTRL_EN + retne lr + + str r3, [r1, #L310_TAG_LATENCY_CTRL] + str r4, [r1, #L310_DATA_LATENCY_CTRL] + str r6, [r1, #L310_ADDR_FILTER_END] + str r5, [r1, #L310_ADDR_FILTER_START] + + str r2, [r1, #L2X0_AUX_CTRL] + mov r9, #L2X0_CTRL_EN + str r9, [r1, #L2X0_CTRL] + ret lr +ENDPROC(l2c310_early_resume) + + .align +1: .long l2x0_saved_regs - . diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 2bb61e703..c2ff480bc 100755 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -73,7 +73,7 @@ * cpu_arm1020_proc_init() */ ENTRY(cpu_arm1020_proc_init) - mov pc, lr + ret lr /* * cpu_arm1020_proc_fin() @@ -83,7 +83,7 @@ ENTRY(cpu_arm1020_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm1020_reset(loc) @@ -107,7 +107,7 @@ ENTRY(cpu_arm1020_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm1020_reset) .popsection @@ -117,7 +117,7 @@ ENDPROC(cpu_arm1020_reset) .align 5 ENTRY(cpu_arm1020_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -133,7 +133,7 @@ ENTRY(arm1020_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache #endif - mov pc, lr + ret lr ENDPROC(arm1020_flush_icache_all) /* @@ -169,7 +169,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -200,7 +200,7 @@ ENTRY(arm1020_flush_user_cache_range) mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -242,7 +242,7 @@ ENTRY(arm1020_coherent_user_range) blo 1b mcr p15, 0, ip, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -264,7 +264,7 @@ ENTRY(arm1020_flush_kern_dcache_area) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -297,7 +297,7 @@ arm1020_dma_inv_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -320,7 +320,7 @@ arm1020_dma_clean_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -342,7 +342,7 @@ ENTRY(arm1020_dma_flush_range) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -365,7 +365,7 @@ ENDPROC(arm1020_dma_map_area) * - dir - DMA direction */ ENTRY(arm1020_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm1020_dma_unmap_area) .globl arm1020_flush_kern_cache_louis @@ -384,7 +384,7 @@ ENTRY(cpu_arm1020_dcache_clean_area) subs r1, r1, #CACHE_DLINESIZE bhi 1b #endif - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -423,7 +423,7 @@ ENTRY(cpu_arm1020_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs #endif /* CONFIG_MMU */ - mov pc, lr + ret lr /* * cpu_arm1020_set_pte(ptep, pte) @@ -441,7 +441,7 @@ ENTRY(cpu_arm1020_set_pte_ext) #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif /* CONFIG_MMU */ - mov pc, lr + ret lr __CPUINIT @@ -462,7 +462,7 @@ __arm1020_setup: #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .R.. .... .... .... #endif - mov pc, lr + ret lr .size __arm1020_setup, . - __arm1020_setup /* diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 8f96aa40f..256e608e1 100755 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -73,7 +73,7 @@ * cpu_arm1020e_proc_init() */ ENTRY(cpu_arm1020e_proc_init) - mov pc, lr + ret lr /* * cpu_arm1020e_proc_fin() @@ -83,7 +83,7 @@ ENTRY(cpu_arm1020e_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm1020e_reset(loc) @@ -107,7 +107,7 @@ ENTRY(cpu_arm1020e_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm1020e_reset) .popsection @@ -117,7 +117,7 @@ ENDPROC(cpu_arm1020e_reset) .align 5 ENTRY(cpu_arm1020e_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -133,7 +133,7 @@ ENTRY(arm1020e_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache #endif - mov pc, lr + ret lr ENDPROC(arm1020e_flush_icache_all) /* @@ -168,7 +168,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -197,7 +197,7 @@ ENTRY(arm1020e_flush_user_cache_range) mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -236,7 +236,7 @@ ENTRY(arm1020e_coherent_user_range) blo 1b mcr p15, 0, ip, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -257,7 +257,7 @@ ENTRY(arm1020e_flush_kern_dcache_area) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -286,7 +286,7 @@ arm1020e_dma_inv_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -308,7 +308,7 @@ arm1020e_dma_clean_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -328,7 +328,7 @@ ENTRY(arm1020e_dma_flush_range) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -351,7 +351,7 @@ ENDPROC(arm1020e_dma_map_area) * - dir - DMA direction */ ENTRY(arm1020e_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm1020e_dma_unmap_area) .globl arm1020e_flush_kern_cache_louis @@ -369,7 +369,7 @@ ENTRY(cpu_arm1020e_dcache_clean_area) subs r1, r1, #CACHE_DLINESIZE bhi 1b #endif - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -407,7 +407,7 @@ ENTRY(cpu_arm1020e_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs #endif - mov pc, lr + ret lr /* * cpu_arm1020e_set_pte(ptep, pte) @@ -423,7 +423,7 @@ ENTRY(cpu_arm1020e_set_pte_ext) mcr p15, 0, r0, c7, c10, 1 @ clean D entry #endif #endif /* CONFIG_MMU */ - mov pc, lr + ret lr __CPUINIT @@ -443,7 +443,7 @@ __arm1020e_setup: #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .R.. .... .... .... #endif - mov pc, lr + ret lr .size __arm1020e_setup, . - __arm1020e_setup /* diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 8ebe4a469..59d9c5107 100755 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -62,7 +62,7 @@ * cpu_arm1022_proc_init() */ ENTRY(cpu_arm1022_proc_init) - mov pc, lr + ret lr /* * cpu_arm1022_proc_fin() @@ -72,7 +72,7 @@ ENTRY(cpu_arm1022_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm1022_reset(loc) @@ -96,7 +96,7 @@ ENTRY(cpu_arm1022_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm1022_reset) .popsection @@ -106,7 +106,7 @@ ENDPROC(cpu_arm1022_reset) .align 5 ENTRY(cpu_arm1022_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -122,7 +122,7 @@ ENTRY(arm1022_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache #endif - mov pc, lr + ret lr ENDPROC(arm1022_flush_icache_all) /* @@ -156,7 +156,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -185,7 +185,7 @@ ENTRY(arm1022_flush_user_cache_range) mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -225,7 +225,7 @@ ENTRY(arm1022_coherent_user_range) blo 1b mcr p15, 0, ip, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -246,7 +246,7 @@ ENTRY(arm1022_flush_kern_dcache_area) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -275,7 +275,7 @@ arm1022_dma_inv_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -297,7 +297,7 @@ arm1022_dma_clean_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -317,7 +317,7 @@ ENTRY(arm1022_dma_flush_range) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -340,7 +340,7 @@ ENDPROC(arm1022_dma_map_area) * - dir - DMA direction */ ENTRY(arm1022_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm1022_dma_unmap_area) .globl arm1022_flush_kern_cache_louis @@ -358,7 +358,7 @@ ENTRY(cpu_arm1022_dcache_clean_area) subs r1, r1, #CACHE_DLINESIZE bhi 1b #endif - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -389,7 +389,7 @@ ENTRY(cpu_arm1022_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs #endif - mov pc, lr + ret lr /* * cpu_arm1022_set_pte_ext(ptep, pte, ext) @@ -405,7 +405,7 @@ ENTRY(cpu_arm1022_set_pte_ext) mcr p15, 0, r0, c7, c10, 1 @ clean D entry #endif #endif /* CONFIG_MMU */ - mov pc, lr + ret lr __CPUINIT @@ -425,7 +425,7 @@ __arm1022_setup: #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .R.............. #endif - mov pc, lr + ret lr .size __arm1022_setup, . - __arm1022_setup /* diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 093fc7e52..ed13659e0 100755 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -62,7 +62,7 @@ * cpu_arm1026_proc_init() */ ENTRY(cpu_arm1026_proc_init) - mov pc, lr + ret lr /* * cpu_arm1026_proc_fin() @@ -72,7 +72,7 @@ ENTRY(cpu_arm1026_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm1026_reset(loc) @@ -96,7 +96,7 @@ ENTRY(cpu_arm1026_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm1026_reset) .popsection @@ -106,7 +106,7 @@ ENDPROC(cpu_arm1026_reset) .align 5 ENTRY(cpu_arm1026_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -122,7 +122,7 @@ ENTRY(arm1026_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache #endif - mov pc, lr + ret lr ENDPROC(arm1026_flush_icache_all) /* @@ -151,7 +151,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -180,7 +180,7 @@ ENTRY(arm1026_flush_user_cache_range) mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache #endif mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -219,7 +219,7 @@ ENTRY(arm1026_coherent_user_range) blo 1b mcr p15, 0, ip, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -240,7 +240,7 @@ ENTRY(arm1026_flush_kern_dcache_area) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -269,7 +269,7 @@ arm1026_dma_inv_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -291,7 +291,7 @@ arm1026_dma_clean_range: blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -311,7 +311,7 @@ ENTRY(arm1026_dma_flush_range) blo 1b #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -334,7 +334,7 @@ ENDPROC(arm1026_dma_map_area) * - dir - DMA direction */ ENTRY(arm1026_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm1026_dma_unmap_area) .globl arm1026_flush_kern_cache_louis @@ -352,7 +352,7 @@ ENTRY(cpu_arm1026_dcache_clean_area) subs r1, r1, #CACHE_DLINESIZE bhi 1b #endif - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -378,7 +378,7 @@ ENTRY(cpu_arm1026_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs #endif - mov pc, lr + ret lr /* * cpu_arm1026_set_pte_ext(ptep, pte, ext) @@ -394,7 +394,7 @@ ENTRY(cpu_arm1026_set_pte_ext) mcr p15, 0, r0, c7, c10, 1 @ clean D entry #endif #endif /* CONFIG_MMU */ - mov pc, lr + ret lr __CPUINIT @@ -420,7 +420,7 @@ __arm1026_setup: #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .R.. .... .... .... #endif - mov pc, lr + ret lr .size __arm1026_setup, . - __arm1026_setup /* diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 0ac908c7a..7419d03fd 100755 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -51,14 +51,14 @@ */ ENTRY(cpu_arm720_dcache_clean_area) ENTRY(cpu_arm720_proc_init) - mov pc, lr + ret lr ENTRY(cpu_arm720_proc_fin) mrc p15, 0, r0, c1, c0, 0 bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * Function: arm720_proc_do_idle(void) @@ -66,7 +66,7 @@ ENTRY(cpu_arm720_proc_fin) * Purpose : put the processor in proper idle mode */ ENTRY(cpu_arm720_do_idle) - mov pc, lr + ret lr /* * Function: arm720_switch_mm(unsigned long pgd_phys) @@ -81,7 +81,7 @@ ENTRY(cpu_arm720_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ update page table ptr mcr p15, 0, r1, c8, c7, 0 @ flush TLB (v4) #endif - mov pc, lr + ret lr /* * Function: arm720_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext) @@ -94,7 +94,7 @@ ENTRY(cpu_arm720_set_pte_ext) #ifdef CONFIG_MMU armv3_set_pte_ext wc_disable=0 #endif - mov pc, lr + ret lr /* * Function: arm720_reset @@ -112,7 +112,7 @@ ENTRY(cpu_arm720_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x2100 @ ..v....s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm720_reset) .popsection @@ -130,7 +130,7 @@ __arm710_setup: bic r0, r0, r5 ldr r5, arm710_cr1_set orr r0, r0, r5 - mov pc, lr @ __ret (head.S) + ret lr @ __ret (head.S) .size __arm710_setup, . - __arm710_setup /* @@ -158,7 +158,7 @@ __arm720_setup: mrc p15, 0, r0, c1, c0 @ get control register bic r0, r0, r5 orr r0, r0, r6 - mov pc, lr @ __ret (head.S) + ret lr @ __ret (head.S) .size __arm720_setup, . - __arm720_setup /* diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index fde2d2a79..31f6b4c01 100755 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -32,7 +32,7 @@ ENTRY(cpu_arm740_proc_init) ENTRY(cpu_arm740_do_idle) ENTRY(cpu_arm740_dcache_clean_area) ENTRY(cpu_arm740_switch_mm) - mov pc, lr + ret lr /* * cpu_arm740_proc_fin() @@ -42,7 +42,7 @@ ENTRY(cpu_arm740_proc_fin) bic r0, r0, #0x3f000000 @ bank/f/lock/s bic r0, r0, #0x0000000c @ w-buffer/cache mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm740_reset(loc) @@ -56,7 +56,7 @@ ENTRY(cpu_arm740_reset) mrc p15, 0, ip, c1, c0, 0 @ get ctrl register bic ip, ip, #0x0000000c @ ............wc.. mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm740_reset) .popsection @@ -117,7 +117,7 @@ __arm740_setup: @ need some benchmark orr r0, r0, #0x0000000d @ MPU/Cache/WB - mov pc, lr + ret lr .size __arm740_setup, . - __arm740_setup diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 6ddea3e46..66e19b955 100755 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -32,13 +32,13 @@ ENTRY(cpu_arm7tdmi_proc_init) ENTRY(cpu_arm7tdmi_do_idle) ENTRY(cpu_arm7tdmi_dcache_clean_area) ENTRY(cpu_arm7tdmi_switch_mm) - mov pc, lr + ret lr /* * cpu_arm7tdmi_proc_fin() */ ENTRY(cpu_arm7tdmi_proc_fin) - mov pc, lr + ret lr /* * Function: cpu_arm7tdmi_reset(loc) @@ -47,7 +47,7 @@ ENTRY(cpu_arm7tdmi_proc_fin) */ .pushsection .idmap.text, "ax" ENTRY(cpu_arm7tdmi_reset) - mov pc, r0 + ret r0 ENDPROC(cpu_arm7tdmi_reset) .popsection @@ -55,7 +55,7 @@ ENDPROC(cpu_arm7tdmi_reset) .type __arm7tdmi_setup, #function __arm7tdmi_setup: - mov pc, lr + ret lr .size __arm7tdmi_setup, . - __arm7tdmi_setup __INITDATA diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 2556cf1c2..b06224a69 100755 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -63,7 +63,7 @@ * cpu_arm920_proc_init() */ ENTRY(cpu_arm920_proc_init) - mov pc, lr + ret lr /* * cpu_arm920_proc_fin() @@ -73,7 +73,7 @@ ENTRY(cpu_arm920_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm920_reset(loc) @@ -97,7 +97,7 @@ ENTRY(cpu_arm920_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm920_reset) .popsection @@ -107,7 +107,7 @@ ENDPROC(cpu_arm920_reset) .align 5 ENTRY(cpu_arm920_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -120,7 +120,7 @@ ENTRY(cpu_arm920_do_idle) ENTRY(arm920_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(arm920_flush_icache_all) /* @@ -151,7 +151,7 @@ __flush_whole_cache: tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -177,7 +177,7 @@ ENTRY(arm920_flush_user_cache_range) blo 1b tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -211,7 +211,7 @@ ENTRY(arm920_coherent_user_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -231,7 +231,7 @@ ENTRY(arm920_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -257,7 +257,7 @@ arm920_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -276,7 +276,7 @@ arm920_dma_clean_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -293,7 +293,7 @@ ENTRY(arm920_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -316,7 +316,7 @@ ENDPROC(arm920_dma_map_area) * - dir - DMA direction */ ENTRY(arm920_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm920_dma_unmap_area) .globl arm920_flush_kern_cache_louis @@ -332,7 +332,7 @@ ENTRY(cpu_arm920_dcache_clean_area) add r0, r0, #CACHE_DLINESIZE subs r1, r1, #CACHE_DLINESIZE bhi 1b - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -367,7 +367,7 @@ ENTRY(cpu_arm920_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs #endif - mov pc, lr + ret lr /* * cpu_arm920_set_pte(ptep, pte, ext) @@ -382,7 +382,7 @@ ENTRY(cpu_arm920_set_pte_ext) mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif - mov pc, lr + ret lr /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm920_suspend_size @@ -425,7 +425,7 @@ __arm920_setup: mrc p15, 0, r0, c1, c0 @ get control register v4 bic r0, r0, r5 orr r0, r0, r6 - mov pc, lr + ret lr .size __arm920_setup, . - __arm920_setup /* diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 4464c49d7..ff54e9652 100755 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -65,7 +65,7 @@ * cpu_arm922_proc_init() */ ENTRY(cpu_arm922_proc_init) - mov pc, lr + ret lr /* * cpu_arm922_proc_fin() @@ -75,7 +75,7 @@ ENTRY(cpu_arm922_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm922_reset(loc) @@ -99,7 +99,7 @@ ENTRY(cpu_arm922_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm922_reset) .popsection @@ -109,7 +109,7 @@ ENDPROC(cpu_arm922_reset) .align 5 ENTRY(cpu_arm922_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -122,7 +122,7 @@ ENTRY(cpu_arm922_do_idle) ENTRY(arm922_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(arm922_flush_icache_all) /* @@ -153,7 +153,7 @@ __flush_whole_cache: tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -179,7 +179,7 @@ ENTRY(arm922_flush_user_cache_range) blo 1b tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -213,7 +213,7 @@ ENTRY(arm922_coherent_user_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -233,7 +233,7 @@ ENTRY(arm922_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -259,7 +259,7 @@ arm922_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -278,7 +278,7 @@ arm922_dma_clean_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -295,7 +295,7 @@ ENTRY(arm922_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -318,7 +318,7 @@ ENDPROC(arm922_dma_map_area) * - dir - DMA direction */ ENTRY(arm922_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm922_dma_unmap_area) .globl arm922_flush_kern_cache_louis @@ -336,7 +336,7 @@ ENTRY(cpu_arm922_dcache_clean_area) subs r1, r1, #CACHE_DLINESIZE bhi 1b #endif - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -371,7 +371,7 @@ ENTRY(cpu_arm922_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs #endif - mov pc, lr + ret lr /* * cpu_arm922_set_pte_ext(ptep, pte, ext) @@ -386,7 +386,7 @@ ENTRY(cpu_arm922_set_pte_ext) mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif /* CONFIG_MMU */ - mov pc, lr + ret lr __CPUINIT @@ -403,7 +403,7 @@ __arm922_setup: mrc p15, 0, r0, c1, c0 @ get control register v4 bic r0, r0, r5 orr r0, r0, r6 - mov pc, lr + ret lr .size __arm922_setup, . - __arm922_setup /* diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 281eb9b9c..cfaf0130c 100755 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -86,7 +86,7 @@ * cpu_arm925_proc_init() */ ENTRY(cpu_arm925_proc_init) - mov pc, lr + ret lr /* * cpu_arm925_proc_fin() @@ -96,7 +96,7 @@ ENTRY(cpu_arm925_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm925_reset(loc) @@ -129,7 +129,7 @@ ENDPROC(cpu_arm925_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 /* * cpu_arm925_do_idle() @@ -145,7 +145,7 @@ ENTRY(cpu_arm925_do_idle) mcr p15, 0, r2, c1, c0, 0 @ Disable I cache mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt mcr p15, 0, r1, c1, c0, 0 @ Restore ICache enable - mov pc, lr + ret lr /* * flush_icache_all() @@ -155,7 +155,7 @@ ENTRY(cpu_arm925_do_idle) ENTRY(arm925_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(arm925_flush_icache_all) /* @@ -188,7 +188,7 @@ __flush_whole_cache: tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -225,7 +225,7 @@ ENTRY(arm925_flush_user_cache_range) blo 1b tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -259,7 +259,7 @@ ENTRY(arm925_coherent_user_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -279,7 +279,7 @@ ENTRY(arm925_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -307,7 +307,7 @@ arm925_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -328,7 +328,7 @@ arm925_dma_clean_range: blo 1b #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -350,7 +350,7 @@ ENTRY(arm925_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -373,7 +373,7 @@ ENDPROC(arm925_dma_map_area) * - dir - DMA direction */ ENTRY(arm925_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm925_dma_unmap_area) .globl arm925_flush_kern_cache_louis @@ -390,7 +390,7 @@ ENTRY(cpu_arm925_dcache_clean_area) bhi 1b #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -419,7 +419,7 @@ ENTRY(cpu_arm925_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs #endif - mov pc, lr + ret lr /* * cpu_arm925_set_pte_ext(ptep, pte, ext) @@ -436,7 +436,7 @@ ENTRY(cpu_arm925_set_pte_ext) #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif /* CONFIG_MMU */ - mov pc, lr + ret lr __CPUINIT @@ -471,7 +471,7 @@ __arm925_setup: #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .1.. .... .... .... #endif - mov pc, lr + ret lr .size __arm925_setup, . - __arm925_setup /* diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 344c8a548..191cf881d 100755 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -55,7 +55,7 @@ * cpu_arm926_proc_init() */ ENTRY(cpu_arm926_proc_init) - mov pc, lr + ret lr /* * cpu_arm926_proc_fin() @@ -65,7 +65,7 @@ ENTRY(cpu_arm926_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm926_reset(loc) @@ -89,7 +89,7 @@ ENTRY(cpu_arm926_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm926_reset) .popsection @@ -111,7 +111,7 @@ ENTRY(cpu_arm926_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt mcr p15, 0, r1, c1, c0, 0 @ Restore ICache enable msr cpsr_c, r3 @ Restore FIQ state - mov pc, lr + ret lr /* * flush_icache_all() @@ -121,7 +121,7 @@ ENTRY(cpu_arm926_do_idle) ENTRY(arm926_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(arm926_flush_icache_all) /* @@ -151,7 +151,7 @@ __flush_whole_cache: tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -188,7 +188,7 @@ ENTRY(arm926_flush_user_cache_range) blo 1b tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -222,7 +222,7 @@ ENTRY(arm926_coherent_user_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -242,7 +242,7 @@ ENTRY(arm926_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -270,7 +270,7 @@ arm926_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -291,7 +291,7 @@ arm926_dma_clean_range: blo 1b #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -313,7 +313,7 @@ ENTRY(arm926_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -336,7 +336,7 @@ ENDPROC(arm926_dma_map_area) * - dir - DMA direction */ ENTRY(arm926_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm926_dma_unmap_area) .globl arm926_flush_kern_cache_louis @@ -353,7 +353,7 @@ ENTRY(cpu_arm926_dcache_clean_area) bhi 1b #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -380,7 +380,7 @@ ENTRY(cpu_arm926_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs #endif - mov pc, lr + ret lr /* * cpu_arm926_set_pte_ext(ptep, pte, ext) @@ -397,7 +397,7 @@ ENTRY(cpu_arm926_set_pte_ext) #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif - mov pc, lr + ret lr /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm926_suspend_size @@ -450,7 +450,7 @@ __arm926_setup: #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x4000 @ .1.. .... .... .... #endif - mov pc, lr + ret lr .size __arm926_setup, . - __arm926_setup /* diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 8da189d4a..9b939f117 100755 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -31,7 +31,7 @@ */ ENTRY(cpu_arm940_proc_init) ENTRY(cpu_arm940_switch_mm) - mov pc, lr + ret lr /* * cpu_arm940_proc_fin() @@ -41,7 +41,7 @@ ENTRY(cpu_arm940_proc_fin) bic r0, r0, #0x00001000 @ i-cache bic r0, r0, #0x00000004 @ d-cache mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm940_reset(loc) @@ -58,7 +58,7 @@ ENTRY(cpu_arm940_reset) bic ip, ip, #0x00000005 @ .............c.p bic ip, ip, #0x00001000 @ i-cache mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm940_reset) .popsection @@ -68,7 +68,7 @@ ENDPROC(cpu_arm940_reset) .align 5 ENTRY(cpu_arm940_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr /* * flush_icache_all() @@ -78,7 +78,7 @@ ENTRY(cpu_arm940_do_idle) ENTRY(arm940_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(arm940_flush_icache_all) /* @@ -122,7 +122,7 @@ ENTRY(arm940_flush_user_cache_range) tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -170,7 +170,7 @@ ENTRY(arm940_flush_kern_dcache_area) bcs 1b @ segments 7 to 0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -191,7 +191,7 @@ arm940_dma_inv_range: subs r1, r1, #1 << 4 bcs 1b @ segments 7 to 0 mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -215,7 +215,7 @@ ENTRY(cpu_arm940_dcache_clean_area) bcs 1b @ segments 7 to 0 #endif mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -241,7 +241,7 @@ ENTRY(arm940_dma_flush_range) subs r1, r1, #1 << 4 bcs 1b @ segments 7 to 0 mcr p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -264,7 +264,7 @@ ENDPROC(arm940_dma_map_area) * - dir - DMA direction */ ENTRY(arm940_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm940_dma_unmap_area) .globl arm940_flush_kern_cache_louis @@ -339,7 +339,7 @@ __arm940_setup: orr r0, r0, #0x00001000 @ I-cache orr r0, r0, #0x00000005 @ MPU/D-cache - mov pc, lr + ret lr .size __arm940_setup, . - __arm940_setup diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index f666cf340..408481581 100755 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -38,7 +38,7 @@ */ ENTRY(cpu_arm946_proc_init) ENTRY(cpu_arm946_switch_mm) - mov pc, lr + ret lr /* * cpu_arm946_proc_fin() @@ -48,7 +48,7 @@ ENTRY(cpu_arm946_proc_fin) bic r0, r0, #0x00001000 @ i-cache bic r0, r0, #0x00000004 @ d-cache mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_arm946_reset(loc) @@ -65,7 +65,7 @@ ENTRY(cpu_arm946_reset) bic ip, ip, #0x00000005 @ .............c.p bic ip, ip, #0x00001000 @ i-cache mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_arm946_reset) .popsection @@ -75,7 +75,7 @@ ENDPROC(cpu_arm946_reset) .align 5 ENTRY(cpu_arm946_do_idle) mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr /* * flush_icache_all() @@ -85,7 +85,7 @@ ENTRY(cpu_arm946_do_idle) ENTRY(arm946_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(arm946_flush_icache_all) /* @@ -117,7 +117,7 @@ __flush_whole_cache: tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ flush I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -156,7 +156,7 @@ ENTRY(arm946_flush_user_cache_range) blo 1b tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -191,7 +191,7 @@ ENTRY(arm946_coherent_user_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -212,7 +212,7 @@ ENTRY(arm946_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -239,7 +239,7 @@ arm946_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -260,7 +260,7 @@ arm946_dma_clean_range: blo 1b #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -284,7 +284,7 @@ ENTRY(arm946_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -307,7 +307,7 @@ ENDPROC(arm946_dma_map_area) * - dir - DMA direction */ ENTRY(arm946_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(arm946_dma_unmap_area) .globl arm946_flush_kern_cache_louis @@ -324,7 +324,7 @@ ENTRY(cpu_arm946_dcache_clean_area) bhi 1b #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr __CPUINIT @@ -394,7 +394,7 @@ __arm946_setup: #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN orr r0, r0, #0x00004000 @ .1.. .... .... .... #endif - mov pc, lr + ret lr .size __arm946_setup, . - __arm946_setup diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 8881391df..c6590231c 100755 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -32,13 +32,13 @@ ENTRY(cpu_arm9tdmi_proc_init) ENTRY(cpu_arm9tdmi_do_idle) ENTRY(cpu_arm9tdmi_dcache_clean_area) ENTRY(cpu_arm9tdmi_switch_mm) - mov pc, lr + ret lr /* * cpu_arm9tdmi_proc_fin() */ ENTRY(cpu_arm9tdmi_proc_fin) - mov pc, lr + ret lr /* * Function: cpu_arm9tdmi_reset(loc) @@ -47,7 +47,7 @@ ENTRY(cpu_arm9tdmi_proc_fin) */ .pushsection .idmap.text, "ax" ENTRY(cpu_arm9tdmi_reset) - mov pc, r0 + ret r0 ENDPROC(cpu_arm9tdmi_reset) .popsection @@ -55,7 +55,7 @@ ENDPROC(cpu_arm9tdmi_reset) .type __arm9tdmi_setup, #function __arm9tdmi_setup: - mov pc, lr + ret lr .size __arm9tdmi_setup, . - __arm9tdmi_setup __INITDATA diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index aaeb6c127..9746671dc 100755 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -32,7 +32,7 @@ * cpu_fa526_proc_init() */ ENTRY(cpu_fa526_proc_init) - mov pc, lr + ret lr /* * cpu_fa526_proc_fin() @@ -44,7 +44,7 @@ ENTRY(cpu_fa526_proc_fin) mcr p15, 0, r0, c1, c0, 0 @ disable caches nop nop - mov pc, lr + ret lr /* * cpu_fa526_reset(loc) @@ -72,7 +72,7 @@ ENTRY(cpu_fa526_reset) mcr p15, 0, ip, c1, c0, 0 @ ctrl register nop nop - mov pc, r0 + ret r0 ENDPROC(cpu_fa526_reset) .popsection @@ -81,7 +81,7 @@ ENDPROC(cpu_fa526_reset) */ .align 4 ENTRY(cpu_fa526_do_idle) - mov pc, lr + ret lr ENTRY(cpu_fa526_dcache_clean_area) @@ -90,7 +90,7 @@ ENTRY(cpu_fa526_dcache_clean_area) subs r1, r1, #CACHE_DLINESIZE bhi 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -117,7 +117,7 @@ ENTRY(cpu_fa526_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB #endif - mov pc, lr + ret lr /* * cpu_fa526_set_pte_ext(ptep, pte, ext) @@ -133,7 +133,7 @@ ENTRY(cpu_fa526_set_pte_ext) mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif - mov pc, lr + ret lr __CPUINIT @@ -164,7 +164,7 @@ __fa526_setup: bic r0, r0, r5 ldr r5, fa526_cr1_set orr r0, r0, r5 - mov pc, lr + ret lr .size __fa526_setup, . - __fa526_setup /* diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index 4106b09e0..a632549d2 100755 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -69,7 +69,7 @@ ENTRY(cpu_feroceon_proc_init) movne r2, r2, lsr #2 @ turned into # of sets sub r2, r2, #(1 << 5) stmia r1, {r2, r3} - mov pc, lr + ret lr /* * cpu_feroceon_proc_fin() @@ -86,7 +86,7 @@ ENTRY(cpu_feroceon_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_feroceon_reset(loc) @@ -110,7 +110,7 @@ ENTRY(cpu_feroceon_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_feroceon_reset) .popsection @@ -124,7 +124,7 @@ ENTRY(cpu_feroceon_do_idle) mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt - mov pc, lr + ret lr /* * flush_icache_all() @@ -134,7 +134,7 @@ ENTRY(cpu_feroceon_do_idle) ENTRY(feroceon_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(feroceon_flush_icache_all) /* @@ -169,7 +169,7 @@ __flush_whole_cache: mov ip, #0 mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -198,7 +198,7 @@ ENTRY(feroceon_flush_user_cache_range) tst r2, #VM_EXEC mov ip, #0 mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -233,7 +233,7 @@ ENTRY(feroceon_coherent_user_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -254,7 +254,7 @@ ENTRY(feroceon_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr .align 5 ENTRY(feroceon_range_flush_kern_dcache_area) @@ -268,7 +268,7 @@ ENTRY(feroceon_range_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -295,7 +295,7 @@ feroceon_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr .align 5 feroceon_range_dma_inv_range: @@ -311,7 +311,7 @@ feroceon_range_dma_inv_range: mcr p15, 5, r0, c15, c14, 0 @ D inv range start mcr p15, 5, r1, c15, c14, 1 @ D inv range top msr cpsr_c, r2 @ restore interrupts - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -331,7 +331,7 @@ feroceon_dma_clean_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr .align 5 feroceon_range_dma_clean_range: @@ -344,7 +344,7 @@ feroceon_range_dma_clean_range: mcr p15, 5, r1, c15, c13, 1 @ D clean range top msr cpsr_c, r2 @ restore interrupts mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -362,7 +362,7 @@ ENTRY(feroceon_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr .align 5 ENTRY(feroceon_range_dma_flush_range) @@ -375,7 +375,7 @@ ENTRY(feroceon_range_dma_flush_range) mcr p15, 5, r1, c15, c15, 1 @ D clean/inv range top msr cpsr_c, r2 @ restore interrupts mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -412,7 +412,7 @@ ENDPROC(feroceon_range_dma_map_area) * - dir - DMA direction */ ENTRY(feroceon_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(feroceon_dma_unmap_area) .globl feroceon_flush_kern_cache_louis @@ -461,7 +461,7 @@ ENTRY(cpu_feroceon_dcache_clean_area) bhi 1b #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -490,9 +490,9 @@ ENTRY(cpu_feroceon_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs - mov pc, r2 + ret r2 #else - mov pc, lr + ret lr #endif /* @@ -512,7 +512,7 @@ ENTRY(cpu_feroceon_set_pte_ext) #endif mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif - mov pc, lr + ret lr __CPUINIT @@ -530,7 +530,7 @@ __feroceon_setup: mrc p15, 0, r0, c1, c0 @ get control register v4 bic r0, r0, r5 orr r0, r0, r6 - mov pc, lr + ret lr .size __feroceon_setup, . - __feroceon_setup /* diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 0b60dd3d7..e22d05c57 100755 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -45,7 +45,7 @@ * cpu_mohawk_proc_init() */ ENTRY(cpu_mohawk_proc_init) - mov pc, lr + ret lr /* * cpu_mohawk_proc_fin() @@ -55,7 +55,7 @@ ENTRY(cpu_mohawk_proc_fin) bic r0, r0, #0x1800 @ ...iz........... bic r0, r0, #0x0006 @ .............ca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_mohawk_reset(loc) @@ -79,7 +79,7 @@ ENTRY(cpu_mohawk_reset) bic ip, ip, #0x0007 @ .............cam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_mohawk_reset) .popsection @@ -93,7 +93,7 @@ ENTRY(cpu_mohawk_do_idle) mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt - mov pc, lr + ret lr /* * flush_icache_all() @@ -103,7 +103,7 @@ ENTRY(cpu_mohawk_do_idle) ENTRY(mohawk_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(mohawk_flush_icache_all) /* @@ -128,7 +128,7 @@ __flush_whole_cache: tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c10, 0 @ drain write buffer - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, flags) @@ -158,7 +158,7 @@ ENTRY(mohawk_flush_user_cache_range) blo 1b tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -194,7 +194,7 @@ ENTRY(mohawk_coherent_user_range) blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB mov r0, #0 - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -214,7 +214,7 @@ ENTRY(mohawk_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -240,7 +240,7 @@ mohawk_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -259,7 +259,7 @@ mohawk_dma_clean_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -277,7 +277,7 @@ ENTRY(mohawk_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -300,7 +300,7 @@ ENDPROC(mohawk_dma_map_area) * - dir - DMA direction */ ENTRY(mohawk_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(mohawk_dma_unmap_area) .globl mohawk_flush_kern_cache_louis @@ -315,7 +315,7 @@ ENTRY(cpu_mohawk_dcache_clean_area) subs r1, r1, #CACHE_DLINESIZE bhi 1b mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr /* * cpu_mohawk_switch_mm(pgd) @@ -333,7 +333,7 @@ ENTRY(cpu_mohawk_switch_mm) orr r0, r0, #0x18 @ cache the page table in L2 mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs - mov pc, lr + ret lr /* * cpu_mohawk_set_pte_ext(ptep, pte, ext) @@ -346,7 +346,7 @@ ENTRY(cpu_mohawk_set_pte_ext) mov r0, r0 mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c10, 4 @ drain WB - mov pc, lr + ret lr .globl cpu_mohawk_suspend_size .equ cpu_mohawk_suspend_size, 4 * 6 @@ -402,7 +402,7 @@ __mohawk_setup: mrc p15, 0, r0, c1, c0 @ get control register bic r0, r0, r5 orr r0, r0, r6 - mov pc, lr + ret lr .size __mohawk_setup, . - __mohawk_setup diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 775d70fba..db4a573ea 100755 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -38,7 +38,7 @@ ENTRY(cpu_sa110_proc_init) mov r0, #0 mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching - mov pc, lr + ret lr /* * cpu_sa110_proc_fin() @@ -50,7 +50,7 @@ ENTRY(cpu_sa110_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_sa110_reset(loc) @@ -74,7 +74,7 @@ ENTRY(cpu_sa110_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_sa110_reset) .popsection @@ -103,7 +103,7 @@ ENTRY(cpu_sa110_do_idle) mov r0, r0 @ safety mov r0, r0 @ safety mcr p15, 0, r0, c15, c1, 2 @ enable clock switching - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -121,7 +121,7 @@ ENTRY(cpu_sa110_dcache_clean_area) add r0, r0, #DCACHELINESIZE subs r1, r1, #DCACHELINESIZE bhi 1b - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -141,7 +141,7 @@ ENTRY(cpu_sa110_switch_mm) mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs ldr pc, [sp], #4 #else - mov pc, lr + ret lr #endif /* @@ -157,7 +157,7 @@ ENTRY(cpu_sa110_set_pte_ext) mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif - mov pc, lr + ret lr __CPUINIT @@ -175,7 +175,7 @@ __sa110_setup: mrc p15, 0, r0, c1, c0 @ get control register v4 bic r0, r0, r5 orr r0, r0, r6 - mov pc, lr + ret lr .size __sa110_setup, . - __sa110_setup /* diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index d92dfd081..a031be489 100755 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -43,7 +43,7 @@ ENTRY(cpu_sa1100_proc_init) mov r0, #0 mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland - mov pc, lr + ret lr /* * cpu_sa1100_proc_fin() @@ -58,7 +58,7 @@ ENTRY(cpu_sa1100_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x000e @ ............wca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_sa1100_reset(loc) @@ -82,7 +82,7 @@ ENTRY(cpu_sa1100_reset) bic ip, ip, #0x000f @ ............wcam bic ip, ip, #0x1100 @ ...i...s........ mcr p15, 0, ip, c1, c0, 0 @ ctrl register - mov pc, r0 + ret r0 ENDPROC(cpu_sa1100_reset) .popsection @@ -113,7 +113,7 @@ ENTRY(cpu_sa1100_do_idle) mcr p15, 0, r0, c15, c8, 2 @ wait for interrupt mov r0, r0 @ safety mcr p15, 0, r0, c15, c1, 2 @ enable clock switching - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -131,7 +131,7 @@ ENTRY(cpu_sa1100_dcache_clean_area) add r0, r0, #DCACHELINESIZE subs r1, r1, #DCACHELINESIZE bhi 1b - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -152,7 +152,7 @@ ENTRY(cpu_sa1100_switch_mm) mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs ldr pc, [sp], #4 #else - mov pc, lr + ret lr #endif /* @@ -168,7 +168,7 @@ ENTRY(cpu_sa1100_set_pte_ext) mcr p15, 0, r0, c7, c10, 1 @ clean D entry mcr p15, 0, r0, c7, c10, 4 @ drain WB #endif - mov pc, lr + ret lr .globl cpu_sa1100_suspend_size .equ cpu_sa1100_suspend_size, 4 * 3 @@ -213,7 +213,7 @@ __sa1100_setup: mrc p15, 0, r0, c1, c0 @ get control register v4 bic r0, r0, r5 orr r0, r0, r6 - mov pc, lr + ret lr .size __sa1100_setup, . - __sa1100_setup /* diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index b96c6e649..0d4291c33 100755 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -36,14 +36,14 @@ #define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S ENTRY(cpu_v6_proc_init) - mov pc, lr + ret lr ENTRY(cpu_v6_proc_fin) mrc p15, 0, r0, c1, c0, 0 @ ctrl register bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x0006 @ .............ca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_v6_reset(loc) @@ -62,7 +62,7 @@ ENTRY(cpu_v6_reset) mcr p15, 0, r1, c1, c0, 0 @ disable MMU mov r1, #0 mcr p15, 0, r1, c7, c5, 4 @ ISB - mov pc, r0 + ret r0 ENDPROC(cpu_v6_reset) .popsection @@ -77,14 +77,14 @@ ENTRY(cpu_v6_do_idle) mov r1, #0 mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt - mov pc, lr + ret lr ENTRY(cpu_v6_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #D_CACHE_LINE_SIZE subs r1, r1, #D_CACHE_LINE_SIZE bhi 1b - mov pc, lr + ret lr /* * cpu_v6_switch_mm(pgd_phys, tsk) @@ -113,7 +113,7 @@ ENTRY(cpu_v6_switch_mm) #endif mcr p15, 0, r1, c13, c0, 1 @ set context ID #endif - mov pc, lr + ret lr /* * cpu_v6_set_pte_ext(ptep, pte, ext) @@ -131,7 +131,7 @@ ENTRY(cpu_v6_set_pte_ext) #ifdef CONFIG_MMU armv6_set_pte_ext cpu_v6 #endif - mov pc, lr + ret lr /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */ .globl cpu_v6_suspend_size @@ -239,7 +239,7 @@ __v6_setup: mcreq p15, 0, r5, c1, c0, 1 @ write aux control reg orreq r0, r0, #(1 << 21) @ low interrupt latency configuration #endif - mov pc, lr @ return to head.S:__ret + ret lr @ return to head.S:__ret /* * V X F I D LR diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index bb20ba0f7..2f5ed6d31 100755 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -59,7 +59,7 @@ ENTRY(cpu_v7_switch_mm) mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 isb #endif - mov pc, lr + bx lr ENDPROC(cpu_v7_switch_mm) /* @@ -106,7 +106,7 @@ ENTRY(cpu_v7_set_pte_ext) ALT_SMP(W(nop)) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif - mov pc, lr + bx lr ENDPROC(cpu_v7_set_pte_ext) /* diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 110e738bc..57185bde4 100755 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -19,6 +19,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include #define TTB_IRGN_NC (0 << 8) #define TTB_IRGN_WBWA (1 << 8) @@ -53,7 +54,7 @@ ENTRY(cpu_v7_switch_mm) mcrr p15, 0, r0, r3, c2 @ set TTB 0 isb #endif - mov pc, lr + ret lr ENDPROC(cpu_v7_switch_mm) #ifdef __ARMEB__ @@ -89,7 +90,7 @@ ENTRY(cpu_v7_set_pte_ext) ALT_SMP(W(nop)) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif - mov pc, lr + ret lr ENDPROC(cpu_v7_set_pte_ext) /* diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 50c9943ca..8c410d759 100755 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -26,7 +26,7 @@ #endif ENTRY(cpu_v7_proc_init) - mov pc, lr + ret lr ENDPROC(cpu_v7_proc_init) ENTRY(cpu_v7_proc_fin) @@ -34,7 +34,7 @@ ENTRY(cpu_v7_proc_fin) bic r0, r0, #0x1000 @ ...i............ bic r0, r0, #0x0006 @ .............ca. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr ENDPROC(cpu_v7_proc_fin) /* @@ -71,20 +71,20 @@ ENDPROC(cpu_v7_reset) ENTRY(cpu_v7_do_idle) dsb @ WFI may enter a low-power mode wfi - mov pc, lr + ret lr ENDPROC(cpu_v7_do_idle) ENTRY(cpu_v7_dcache_clean_area) ALT_SMP(W(nop)) @ MP extensions imply L1 PTW ALT_UP_B(1f) - mov pc, lr + ret lr 1: dcache_line_size r2, r3 2: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, r2 subs r1, r1, r2 bhi 2b dsb - mov pc, lr + ret lr ENDPROC(cpu_v7_dcache_clean_area) string cpu_v7_name, "ARMv7 Processor" @@ -152,7 +152,7 @@ ENTRY(cpu_pj4b_do_idle) dsb @ WFI may enter a low-power mode wfi dsb @barrier - mov pc, lr + ret lr ENDPROC(cpu_pj4b_do_idle) #else globl_equ cpu_pj4b_do_idle, cpu_v7_do_idle @@ -359,7 +359,7 @@ __v7_setup: bic r0, r0, r5 @ clear bits them orr r0, r0, r6 @ set them THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions - mov pc, lr @ return to head.S:__ret + ret lr @ return to head.S:__ret ENDPROC(__v7_setup) .align 2 diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S new file mode 100644 index 000000000..d1e68b553 --- /dev/null +++ b/arch/arm/mm/proc-v7m.S @@ -0,0 +1,159 @@ +/* + * linux/arch/arm/mm/proc-v7m.S + * + * Copyright (C) 2008 ARM Ltd. + * Copyright (C) 2001 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This is the "shell" of the ARMv7-M processor support. + */ +#include +#include +#include +#include "proc-macros.S" + +ENTRY(cpu_v7m_proc_init) + ret lr +ENDPROC(cpu_v7m_proc_init) + +ENTRY(cpu_v7m_proc_fin) + ret lr +ENDPROC(cpu_v7m_proc_fin) + +/* + * cpu_v7m_reset(loc) + * + * Perform a soft reset of the system. Put the CPU into the + * same state as it would be if it had been reset, and branch + * to what would be the reset vector. + * + * - loc - location to jump to for soft reset + */ + .align 5 +ENTRY(cpu_v7m_reset) + ret r0 +ENDPROC(cpu_v7m_reset) + +/* + * cpu_v7m_do_idle() + * + * Idle the processor (eg, wait for interrupt). + * + * IRQs are already disabled. + */ +ENTRY(cpu_v7m_do_idle) + wfi + ret lr +ENDPROC(cpu_v7m_do_idle) + +ENTRY(cpu_v7m_dcache_clean_area) + ret lr +ENDPROC(cpu_v7m_dcache_clean_area) + +/* + * There is no MMU, so here is nothing to do. + */ +ENTRY(cpu_v7m_switch_mm) + ret lr +ENDPROC(cpu_v7m_switch_mm) + +.globl cpu_v7m_suspend_size +.equ cpu_v7m_suspend_size, 0 + +#ifdef CONFIG_ARM_CPU_SUSPEND +ENTRY(cpu_v7m_do_suspend) + ret lr +ENDPROC(cpu_v7m_do_suspend) + +ENTRY(cpu_v7m_do_resume) + ret lr +ENDPROC(cpu_v7m_do_resume) +#endif + + .section ".text.init", #alloc, #execinstr + +/* + * __v7m_setup + * + * This should be able to cover all ARMv7-M cores. + */ +__v7m_setup: + @ Configure the vector table base address + ldr r0, =BASEADDR_V7M_SCB + ldr r12, =vector_table + str r12, [r0, V7M_SCB_VTOR] + + @ enable UsageFault, BusFault and MemManage fault. + ldr r5, [r0, #V7M_SCB_SHCSR] + orr r5, #(V7M_SCB_SHCSR_USGFAULTENA | V7M_SCB_SHCSR_BUSFAULTENA | V7M_SCB_SHCSR_MEMFAULTENA) + str r5, [r0, #V7M_SCB_SHCSR] + + @ Lower the priority of the SVC and PendSV exceptions + mov r5, #0x80000000 + str r5, [r0, V7M_SCB_SHPR2] @ set SVC priority + mov r5, #0x00800000 + str r5, [r0, V7M_SCB_SHPR3] @ set PendSV priority + + @ SVC to run the kernel in this mode + adr r1, BSYM(1f) + ldr r5, [r12, #11 * 4] @ read the SVC vector entry + str r1, [r12, #11 * 4] @ write the temporary SVC vector entry + mov r6, lr @ save LR + mov r7, sp @ save SP + ldr sp, =__v7m_setup_stack_top + cpsie i + svc #0 +1: cpsid i + str r5, [r12, #11 * 4] @ restore the original SVC vector entry + mov lr, r6 @ restore LR + mov sp, r7 @ restore SP + + @ Special-purpose control register + mov r1, #1 + msr control, r1 @ Thread mode has unpriviledged access + + @ Configure the System Control Register to ensure 8-byte stack alignment + @ Note the STKALIGN bit is either RW or RAO. + ldr r12, [r0, V7M_SCB_CCR] @ system control register + orr r12, #V7M_SCB_CCR_STKALIGN + str r12, [r0, V7M_SCB_CCR] + ret lr +ENDPROC(__v7m_setup) + + .align 2 +__v7m_setup_stack: + .space 4 * 8 @ 8 registers +__v7m_setup_stack_top: + + define_processor_functions v7m, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1 + + .section ".rodata" + string cpu_arch_name, "armv7m" + string cpu_elf_name "v7m" + string cpu_v7m_name "ARMv7-M" + + .section ".proc.info.init", #alloc, #execinstr + + /* + * Match any ARMv7-M processor core. + */ + .type __v7m_proc_info, #object +__v7m_proc_info: + .long 0x000f0000 @ Required ID value + .long 0x000f0000 @ Mask for ID + .long 0 @ proc_info_list.__cpu_mm_mmu_flags + .long 0 @ proc_info_list.__cpu_io_mmu_flags + b __v7m_setup @ proc_info_list.__cpu_flush + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT + .long cpu_v7m_name + .long v7m_processor_functions @ proc_info_list.proc + .long 0 @ proc_info_list.tlb + .long 0 @ proc_info_list.user + .long nop_cache_fns @ proc_info_list.cache + .size __v7m_proc_info, . - __v7m_proc_info + diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index e8efd83b6..48642cd38 100755 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -83,7 +83,7 @@ * Nothing too exciting at the moment */ ENTRY(cpu_xsc3_proc_init) - mov pc, lr + ret lr /* * cpu_xsc3_proc_fin() @@ -93,7 +93,7 @@ ENTRY(cpu_xsc3_proc_fin) bic r0, r0, #0x1800 @ ...IZ........... bic r0, r0, #0x0006 @ .............CA. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_xsc3_reset(loc) @@ -119,7 +119,7 @@ ENTRY(cpu_xsc3_reset) @ CAUTION: MMU turned off from this point. We count on the pipeline @ already containing those two last instructions to survive. mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs - mov pc, r0 + ret r0 ENDPROC(cpu_xsc3_reset) .popsection @@ -138,7 +138,7 @@ ENDPROC(cpu_xsc3_reset) ENTRY(cpu_xsc3_do_idle) mov r0, #1 mcr p14, 0, r0, c7, c0, 0 @ go to idle - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -150,7 +150,7 @@ ENTRY(cpu_xsc3_do_idle) ENTRY(xsc3_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(xsc3_flush_icache_all) /* @@ -176,7 +176,7 @@ __flush_whole_cache: mcrne p15, 0, ip, c7, c5, 0 @ invalidate L1 I cache and BTB mcrne p15, 0, ip, c7, c10, 4 @ data write barrier mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, vm_flags) @@ -205,7 +205,7 @@ ENTRY(xsc3_flush_user_cache_range) mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB mcrne p15, 0, ip, c7, c10, 4 @ data write barrier mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -232,7 +232,7 @@ ENTRY(xsc3_coherent_user_range) mcr p15, 0, r0, c7, c5, 0 @ invalidate L1 I cache and BTB mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c5, 4 @ prefetch flush - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -253,7 +253,7 @@ ENTRY(xsc3_flush_kern_dcache_area) mcr p15, 0, r0, c7, c5, 0 @ invalidate L1 I cache and BTB mcr p15, 0, r0, c7, c10, 4 @ data write barrier mcr p15, 0, r0, c7, c5, 4 @ prefetch flush - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -277,7 +277,7 @@ xsc3_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ data write barrier - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -294,7 +294,7 @@ xsc3_dma_clean_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ data write barrier - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -311,7 +311,7 @@ ENTRY(xsc3_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ data write barrier - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -334,7 +334,7 @@ ENDPROC(xsc3_dma_map_area) * - dir - DMA direction */ ENTRY(xsc3_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(xsc3_dma_unmap_area) .globl xsc3_flush_kern_cache_louis @@ -348,7 +348,7 @@ ENTRY(cpu_xsc3_dcache_clean_area) add r0, r0, #CACHELINESIZE subs r1, r1, #CACHELINESIZE bhi 1b - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -406,7 +406,7 @@ ENTRY(cpu_xsc3_set_pte_ext) orr r2, r2, ip xscale_set_pte_ext_epilogue - mov pc, lr + ret lr .ltorg .align @@ -480,7 +480,7 @@ __xsc3_setup: bic r0, r0, r5 @ ..V. ..R. .... ..A. orr r0, r0, r6 @ ..VI Z..S .... .C.M (mmu) @ ...I Z..S .... .... (uc) - mov pc, lr + ret lr .size __xsc3_setup, . - __xsc3_setup diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 08b51b7db..141f25a19 100755 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -118,7 +118,7 @@ ENTRY(cpu_xscale_proc_init) mrc p15, 0, r1, c1, c0, 1 bic r1, r1, #1 mcr p15, 0, r1, c1, c0, 1 - mov pc, lr + ret lr /* * cpu_xscale_proc_fin() @@ -128,7 +128,7 @@ ENTRY(cpu_xscale_proc_fin) bic r0, r0, #0x1800 @ ...IZ........... bic r0, r0, #0x0006 @ .............CA. mcr p15, 0, r0, c1, c0, 0 @ disable caches - mov pc, lr + ret lr /* * cpu_xscale_reset(loc) @@ -160,7 +160,7 @@ ENTRY(cpu_xscale_reset) @ CAUTION: MMU turned off from this point. We count on the pipeline @ already containing those two last instructions to survive. mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs - mov pc, r0 + ret r0 ENDPROC(cpu_xscale_reset) .popsection @@ -179,7 +179,7 @@ ENDPROC(cpu_xscale_reset) ENTRY(cpu_xscale_do_idle) mov r0, #1 mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE - mov pc, lr + ret lr /* ================================= CACHE ================================ */ @@ -191,7 +191,7 @@ ENTRY(cpu_xscale_do_idle) ENTRY(xscale_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mov pc, lr + ret lr ENDPROC(xscale_flush_icache_all) /* @@ -216,7 +216,7 @@ __flush_whole_cache: tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov pc, lr + ret lr /* * flush_user_cache_range(start, end, vm_flags) @@ -245,7 +245,7 @@ ENTRY(xscale_flush_user_cache_range) tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov pc, lr + ret lr /* * coherent_kern_range(start, end) @@ -269,7 +269,7 @@ ENTRY(xscale_coherent_kern_range) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov pc, lr + ret lr /* * coherent_user_range(start, end) @@ -291,7 +291,7 @@ ENTRY(xscale_coherent_user_range) mov r0, #0 mcr p15, 0, r0, c7, c5, 6 @ Invalidate BTB mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov pc, lr + ret lr /* * flush_kern_dcache_area(void *addr, size_t size) @@ -312,7 +312,7 @@ ENTRY(xscale_flush_kern_dcache_area) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov pc, lr + ret lr /* * dma_inv_range(start, end) @@ -336,7 +336,7 @@ xscale_dma_inv_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov pc, lr + ret lr /* * dma_clean_range(start, end) @@ -353,7 +353,7 @@ xscale_dma_clean_range: cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov pc, lr + ret lr /* * dma_flush_range(start, end) @@ -371,7 +371,7 @@ ENTRY(xscale_dma_flush_range) cmp r0, r1 blo 1b mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer - mov pc, lr + ret lr /* * dma_map_area(start, size, dir) @@ -407,7 +407,7 @@ ENDPROC(xscale_80200_A0_A1_dma_map_area) * - dir - DMA direction */ ENTRY(xscale_dma_unmap_area) - mov pc, lr + ret lr ENDPROC(xscale_dma_unmap_area) .globl xscale_flush_kern_cache_louis @@ -458,7 +458,7 @@ ENTRY(cpu_xscale_dcache_clean_area) add r0, r0, #CACHELINESIZE subs r1, r1, #CACHELINESIZE bhi 1b - mov pc, lr + ret lr /* =============================== PageTable ============================== */ @@ -521,7 +521,7 @@ ENTRY(cpu_xscale_set_pte_ext) orr r2, r2, ip xscale_set_pte_ext_epilogue - mov pc, lr + ret lr .ltorg .align @@ -574,7 +574,7 @@ __xscale_setup: mrc p15, 0, r0, c1, c0, 0 @ get control register bic r0, r0, r5 orr r0, r0, r6 - mov pc, lr + ret lr .size __xscale_setup, . - __xscale_setup /* diff --git a/arch/arm/mm/tlb-fa.S b/arch/arm/mm/tlb-fa.S index d3ddcf9a7..d2d9ecbe0 100755 --- a/arch/arm/mm/tlb-fa.S +++ b/arch/arm/mm/tlb-fa.S @@ -18,6 +18,7 @@ */ #include #include +#include #include #include #include "proc-macros.S" @@ -37,7 +38,7 @@ ENTRY(fa_flush_user_tlb_range) vma_vm_mm ip, r2 act_mm r3 @ get current->active_mm eors r3, ip, r3 @ == mm ? - movne pc, lr @ no, we dont do anything + retne lr @ no, we dont do anything mov r3, #0 mcr p15, 0, r3, c7, c10, 4 @ drain WB bic r0, r0, #0x0ff @@ -47,7 +48,7 @@ ENTRY(fa_flush_user_tlb_range) cmp r0, r1 blo 1b mcr p15, 0, r3, c7, c10, 4 @ data write barrier - mov pc, lr + ret lr ENTRY(fa_flush_kern_tlb_range) @@ -61,7 +62,7 @@ ENTRY(fa_flush_kern_tlb_range) blo 1b mcr p15, 0, r3, c7, c10, 4 @ data write barrier mcr p15, 0, r3, c7, c5, 4 @ prefetch flush (isb) - mov pc, lr + ret lr __INITDATA diff --git a/arch/arm/mm/tlb-v4.S b/arch/arm/mm/tlb-v4.S index 17a025ade..a2b5dca42 100755 --- a/arch/arm/mm/tlb-v4.S +++ b/arch/arm/mm/tlb-v4.S @@ -14,6 +14,7 @@ */ #include #include +#include #include #include #include "proc-macros.S" @@ -33,7 +34,7 @@ ENTRY(v4_flush_user_tlb_range) vma_vm_mm ip, r2 act_mm r3 @ get current->active_mm eors r3, ip, r3 @ == mm ? - movne pc, lr @ no, we dont do anything + retne lr @ no, we dont do anything .v4_flush_kern_tlb_range: bic r0, r0, #0x0ff bic r0, r0, #0xf00 @@ -41,7 +42,7 @@ ENTRY(v4_flush_user_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mov pc, lr + ret lr /* * v4_flush_kern_tlb_range(start, end) diff --git a/arch/arm/mm/tlb-v4wb.S b/arch/arm/mm/tlb-v4wb.S index c04598fa4..5a093b458 100755 --- a/arch/arm/mm/tlb-v4wb.S +++ b/arch/arm/mm/tlb-v4wb.S @@ -14,6 +14,7 @@ */ #include #include +#include #include #include #include "proc-macros.S" @@ -33,7 +34,7 @@ ENTRY(v4wb_flush_user_tlb_range) vma_vm_mm ip, r2 act_mm r3 @ get current->active_mm eors r3, ip, r3 @ == mm ? - movne pc, lr @ no, we dont do anything + retne lr @ no, we dont do anything vma_vm_flags r2, r2 mcr p15, 0, r3, c7, c10, 4 @ drain WB tst r2, #VM_EXEC @@ -44,7 +45,7 @@ ENTRY(v4wb_flush_user_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mov pc, lr + ret lr /* * v4_flush_kern_tlb_range(start, end) @@ -65,7 +66,7 @@ ENTRY(v4wb_flush_kern_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mov pc, lr + ret lr __INITDATA diff --git a/arch/arm/mm/tlb-v4wbi.S b/arch/arm/mm/tlb-v4wbi.S index 1f6062b6c..058861548 100755 --- a/arch/arm/mm/tlb-v4wbi.S +++ b/arch/arm/mm/tlb-v4wbi.S @@ -14,6 +14,7 @@ */ #include #include +#include #include #include #include "proc-macros.S" @@ -32,7 +33,7 @@ ENTRY(v4wbi_flush_user_tlb_range) vma_vm_mm ip, r2 act_mm r3 @ get current->active_mm eors r3, ip, r3 @ == mm ? - movne pc, lr @ no, we dont do anything + retne lr @ no, we dont do anything mov r3, #0 mcr p15, 0, r3, c7, c10, 4 @ drain WB vma_vm_flags r2, r2 @@ -44,7 +45,7 @@ ENTRY(v4wbi_flush_user_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mov pc, lr + ret lr ENTRY(v4wbi_flush_kern_tlb_range) mov r3, #0 @@ -56,7 +57,7 @@ ENTRY(v4wbi_flush_kern_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mov pc, lr + ret lr __INITDATA diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S index eca07f550..6f689be63 100755 --- a/arch/arm/mm/tlb-v6.S +++ b/arch/arm/mm/tlb-v6.S @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include "proc-macros.S" @@ -55,7 +56,7 @@ ENTRY(v6wbi_flush_user_tlb_range) cmp r0, r1 blo 1b mcr p15, 0, ip, c7, c10, 4 @ data synchronization barrier - mov pc, lr + ret lr /* * v6wbi_flush_kern_tlb_range(start,end) @@ -84,7 +85,7 @@ ENTRY(v6wbi_flush_kern_tlb_range) blo 1b mcr p15, 0, r2, c7, c10, 4 @ data synchronization barrier mcr p15, 0, r2, c7, c5, 4 @ prefetch flush (isb) - mov pc, lr + ret lr __INIT diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index ea94765ac..71e80bb65 100755 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -57,7 +57,7 @@ ENTRY(v7wbi_flush_user_tlb_range) cmp r0, r1 blo 1b dsb - mov pc, lr + ret lr ENDPROC(v7wbi_flush_user_tlb_range) /* @@ -86,7 +86,7 @@ ENTRY(v7wbi_flush_kern_tlb_range) blo 1b dsb isb - mov pc, lr + ret lr ENDPROC(v7wbi_flush_kern_tlb_range) __INIT diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S index d18dde95b..5d65be1f1 100755 --- a/arch/arm/nwfpe/entry.S +++ b/arch/arm/nwfpe/entry.S @@ -19,7 +19,7 @@ along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ - +#include #include /* This is the kernel's entry point into the floating point emulator. @@ -92,7 +92,7 @@ emulate: mov r0, r6 @ prepare for EmulateAll() bl EmulateAll @ emulate the instruction cmp r0, #0 @ was emulation successful - moveq pc, r4 @ no, return failure + reteq r4 @ no, return failure next: .Lx1: ldrt r6, [r5], #4 @ get the next instruction and @@ -102,7 +102,7 @@ next: teq r2, #0x0C000000 teqne r2, #0x0D000000 teqne r2, #0x0E000000 - movne pc, r9 @ return ok if not a fp insn + retne r9 @ return ok if not a fp insn str r5, [sp, #S_PC] @ update PC copy in regs @@ -115,7 +115,7 @@ next: @ plain LDR instruction. Weird, but it seems harmless. .pushsection .fixup,"ax" .align 2 -.Lfix: mov pc, r9 @ let the user eat segfaults +.Lfix: ret r9 @ let the user eat segfaults .popsection .pushsection __ex_table,"a" diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index c20fb9702..288cca4f2 100755 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -40,7 +40,7 @@ ENTRY(vfp_null_entry) sub r11, r4, #1 @ decrement it str r11, [r10, #TI_PREEMPT] #endif - mov pc, lr + ret lr ENDPROC(vfp_null_entry) .align 2 @@ -60,7 +60,7 @@ ENTRY(vfp_testing_entry) #endif ldr r0, VFP_arch_address str r0, [r0] @ set to non-zero value - mov pc, r9 @ we have handled the fault + ret r9 @ we have handled the fault ENDPROC(vfp_testing_entry) .align 2 diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 8d10dc8a1..89b6f02ec 100755 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -180,7 +180,7 @@ vfp_hw_state_valid: sub r11, r4, #1 @ decrement it str r11, [r10, #TI_PREEMPT] #endif - mov pc, r9 @ we think we have handled things + ret r9 @ we think we have handled things look_for_VFP_exceptions: @@ -204,7 +204,7 @@ look_for_VFP_exceptions: sub r11, r4, #1 @ decrement it str r11, [r10, #TI_PREEMPT] #endif - mov pc, lr + ret lr process_exception: DBGSTR "bounce" @@ -236,7 +236,7 @@ ENTRY(vfp_save_state) VFPFMRX r12, FPINST2 @ FPINST2 if needed (and present) 1: stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2 - mov pc, lr + ret lr ENDPROC(vfp_save_state) .align @@ -247,7 +247,7 @@ vfp_current_hw_state_address: #ifdef CONFIG_THUMB2_KERNEL adr \tmp, 1f add \tmp, \tmp, \base, lsl \shift - mov pc, \tmp + ret \tmp #else add pc, pc, \base, lsl \shift mov r0, r0 @@ -259,10 +259,10 @@ ENTRY(vfp_get_float) tbl_branch r0, r3, #3 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 1: mrc p10, 0, r0, c\dr, c0, 0 @ fmrs r0, s0 - mov pc, lr + ret lr .org 1b + 8 1: mrc p10, 0, r0, c\dr, c0, 4 @ fmrs r0, s1 - mov pc, lr + ret lr .org 1b + 8 .endr ENDPROC(vfp_get_float) @@ -271,10 +271,10 @@ ENTRY(vfp_put_float) tbl_branch r1, r3, #3 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 1: mcr p10, 0, r0, c\dr, c0, 0 @ fmsr r0, s0 - mov pc, lr + ret lr .org 1b + 8 1: mcr p10, 0, r0, c\dr, c0, 4 @ fmsr r0, s1 - mov pc, lr + ret lr .org 1b + 8 .endr ENDPROC(vfp_put_float) @@ -283,14 +283,14 @@ ENTRY(vfp_get_double) tbl_branch r0, r3, #3 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 1: fmrrd r0, r1, d\dr - mov pc, lr + ret lr .org 1b + 8 .endr #ifdef CONFIG_VFPv3 @ d16 - d31 registers .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 1: mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr - mov pc, lr + ret lr .org 1b + 8 .endr #endif @@ -298,21 +298,21 @@ ENTRY(vfp_get_double) @ virtual register 16 (or 32 if VFPv3) for compare with zero mov r0, #0 mov r1, #0 - mov pc, lr + ret lr ENDPROC(vfp_get_double) ENTRY(vfp_put_double) tbl_branch r2, r3, #3 .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 1: fmdrr d\dr, r0, r1 - mov pc, lr + ret lr .org 1b + 8 .endr #ifdef CONFIG_VFPv3 @ d16 - d31 registers .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 1: mcrr p11, 3, r0, r1, c\dr @ fmdrr r0, r1, d\dr - mov pc, lr + ret lr .org 1b + 8 .endr #endif diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index 199cb2da7..c21bfab4c 100755 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -58,7 +58,7 @@ ENTRY(HYPERVISOR_##hypercall) \ mov r12, #__HYPERVISOR_##hypercall; \ __HVC(XEN_IMM); \ - mov pc, lr; \ + ret lr; \ ENDPROC(HYPERVISOR_##hypercall) #define HYPERCALL0 HYPERCALL_SIMPLE @@ -74,7 +74,7 @@ ENTRY(HYPERVISOR_##hypercall) \ mov r12, #__HYPERVISOR_##hypercall; \ __HVC(XEN_IMM); \ ldm sp!, {r4} \ - mov pc, lr \ + ret lr \ ENDPROC(HYPERVISOR_##hypercall) .text @@ -99,5 +99,5 @@ ENTRY(privcmd_call) ldr r4, [sp, #4] __HVC(XEN_IMM) ldm sp!, {r4} - mov pc, lr + ret lr ENDPROC(privcmd_call);