-
Notifications
You must be signed in to change notification settings - Fork 230
/
ina219.h
54 lines (47 loc) · 3.53 KB
/
ina219.h
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
/* ina219 defines, some from here:
https://github.com/johngineer/ArduinoINA219/blob/master/INA219.cpp
some from the Adafruit INA219 library --sq5bpf
*/
#define INA219_ADDR 0x40
#define INA219_REG_CONFIG 0x00
#define INA219_REG_SHUNTVOLTAGE 0x01
#define INA219_REG_BUSVOLTAGE 0x02
#define INA219_REG_POWER 0x03
#define INA219_REG_CURRENT 0x04
#define INA219_REG_CALIBRATION 0x05
#define INA219_CONFIG_BVOLTAGERANGE_16V (0x0000) //max 16V
#define INA219_CONFIG_BVOLTAGERANGE_32V (0x2000) //max 32V
#define INA219_CONFIG_GAIN_1_40MV (0x0000) // Gain 1, 40mV Range
#define INA219_CONFIG_GAIN_2_80MV (0x0800) // Gain 2, 80mV Range
#define INA219_CONFIG_GAIN_4_160MV (0x1000) // Gain 4, 160mV Range
#define INA219_CONFIG_GAIN_8_320MV (0x1800) // Gain 8, 320mV Range
#define INA219_CONFIG_BADCRES_9BIT (0x0000) // 9-bit bus res = 0..511
#define INA219_CONFIG_BADCRES_10BIT (0x0080) // 10-bit bus res = 0..1023
#define INA219_CONFIG_BADCRES_11BIT (0x0100) // 11-bit bus res = 0..2047
#define INA219_CONFIG_BADCRES_12BIT (0x0180) // 12-bit bus res = 0..4097
#define INA219_CONFIG_BADCRES_12BIT_2S_1060US (0x0480) // 2 x 12-bit bus samples averaged together
#define INA219_CONFIG_BADCRES_12BIT_4S_2130US (0x0500) // 4 x 12-bit bus samples averaged together
#define INA219_CONFIG_BADCRES_12BIT_8S_4260US (0x0580) // 8 x 12-bit bus samples averaged together
#define INA219_CONFIG_BADCRES_12BIT_16S_8510US (0x0600) // 16 x 12-bit bus samples averaged together
#define INA219_CONFIG_BADCRES_12BIT_32S_17MS (0x0680) // 32 x 12-bit bus samples averaged together
#define INA219_CONFIG_BADCRES_12BIT_64S_34MS (0x0700) // 64 x 12-bit bus samples averaged together
#define INA219_CONFIG_BADCRES_12BIT_128S_69MS (0x0780) // 128 x 12-bit bus samples averaged together
#define INA219_CONFIG_SADCRES_9BIT_1S_84US = (0x0000) // 1 x 9-bit shunt sample
#define INA219_CONFIG_SADCRES_10BIT_1S_148US (0x0008) // 1 x 10-bit shunt sample
#define INA219_CONFIG_SADCRES_11BIT_1S_276US (0x0010) // 1 x 11-bit shunt sample
#define INA219_CONFIG_SADCRES_12BIT_1S_532US (0x0018) // 1 x 12-bit shunt sample
#define INA219_CONFIG_SADCRES_12BIT_2S_1060US (0x0048) // 2 x 12-bit shunt samples averaged together
#define INA219_CONFIG_SADCRES_12BIT_4S_2130US (0x0050) // 4 x 12-bit shunt samples averaged together
#define INA219_CONFIG_SADCRES_12BIT_8S_4260US (0x0058) // 8 x 12-bit shunt samples averaged together
#define INA219_CONFIG_SADCRES_12BIT_16S_8510US (0x0060) // 16 x 12-bit shunt samples averaged together
#define INA219_CONFIG_SADCRES_12BIT_32S_17MS (0x0068) // 32 x 12-bit shunt samples averaged together
#define INA219_CONFIG_SADCRES_12BIT_64S_34MS (0x0070) // 64 x 12-bit shunt samples averaged together
#define INA219_CONFIG_SADCRES_12BIT_128S_69MS (0x0078) // 128 x 12-bit shunt samples averaged together
#define INA219_CONFIG_MODE_POWERDOWN 0x00 /**< power down */
#define INA219_CONFIG_MODE_SVOLT_TRIGGERED 0x01 /**< shunt voltage triggered */
#define INA219_CONFIG_MODE_BVOLT_TRIGGERED 0x02 /**< bus voltage triggered */
#define INA219_CONFIG_MODE_SANDBVOLT_TRIGGERED 0x03 /**< shunt and bus voltage triggered */
#define INA219_CONFIG_MODE_ADCOFF 0x04 /**< ADC off */
#define INA219_CONFIG_MODE_SVOLT_CONTINUOUS 0x05 /**< shunt voltage continuous */
#define INA219_CONFIG_MODE_BVOLT_CONTINUOUS 0x06 /**< bus voltage continuous */
#define INA219_CONFIG_MODE_SANDBVOLT_CONTINUOUS 0x07 /**< shunt and bus voltage continuous */