Nuki Hub 8.19

• Fix OTA auto forward. Thanks @regevbr, Issue #123
• Add support for LilyGO-T-ETH-POE (Issue #144)
• Fix W5500 detection (issue #152)
• Publish network device name
• Publish keypad attempt information (including home assistant auto discovery *, Issue #117)
• Publish last lock action (including home assistant auto discovery *). Needs "Publish auth info" enabled. (Issue #131)
• Publish firmware version (including home assistant auto discovery). Thanks @mkoppanen, PR #151

* There are some known issues. The value templates need adjustment, will be addressed in a later release.

Nuki Hub 8.18

• fix for pairing issues
• add support for M5Stack PoESP32 Unit
• delete home assistant discovery topics for lock and keypad if not any longer present
• show if keypad or lock sensor present in system information page
• update espMqttClient and ArduinoJson libraries

Nuki Hub 8.17

• fix auto discovery for keypad and door sensor
• add "Not applicable" restart reason to better distinguish between crash and intended restart

Nuki Hub 8.16

• Allow to configure a static IP address
• Publish lock state query command result

Nuki Hub 8.15

• Fixes for OTA (disconnect from and disable MQTT and ble beacon watchdog while updating)

Nuki Hub 8.14

• add support for NUKI keypad v2
• Set default for "Restart if bluetooth beacons not received" to 60 seconds

8.13

• fixed: Can't configure PIN via web interface

Nuki Hub 8.12

• add support for WT32-ETH01
• upgrade to Arduino core for ESP32 2.0.7 for improved stability
• use post method to save configuration in web interface. No more passwords in the URL.

Nuki Hub 8.11

• Add support for Olimex ESP32-POE / ESP32-POE-ISO with LAN 8720 (Issue #38)

Nuki Hub 8.10

• add home assistant auto discovery for nuki configuration
• publish hardware and firmware version to mqtt
• add home assistant auto discovery for hardware and firmware version