diff --git a/README.md b/README.md
index a224220..75ca9c8 100644
--- a/README.md
+++ b/README.md
@@ -32,6 +32,6 @@ Unless you explicitly state otherwise, any contribution intentionally submitted
 
 ---
 
-Made with ❤️ for OSS by [Silitics](https://www.silitics.com).
+Made with ❤️ for OSS by [Silitics](https://www.silitics.com)
 
 <sub>Raspberry Pi is a trademark of Raspberry Pi Ltd</sub>
diff --git a/www/docs/integrations/_category_.json b/www/docs/integrations/_category_.json
new file mode 100644
index 0000000..86dc34e
--- /dev/null
+++ b/www/docs/integrations/_category_.json
@@ -0,0 +1,8 @@
+{
+    "label": "Integrations",
+    "position": 30,
+    "link": {
+        "type": "doc",
+        "id": "index"
+    }
+}
\ No newline at end of file
diff --git a/www/docs/integrations/index.md b/www/docs/integrations/index.md
new file mode 100644
index 0000000..d5bed6d
--- /dev/null
+++ b/www/docs/integrations/index.md
@@ -0,0 +1,5 @@
+# Integrations
+
+Rugpi provides the reliable foundation for building images, OTA updates, and state management.
+To manage devices remotely, Rugpi integrates well with existing off-the-shelf solutions.
+This part of the documentations list such integrations.
\ No newline at end of file
diff --git a/www/docs/integrations/mender.md b/www/docs/integrations/mender.md
new file mode 100644
index 0000000..81b1feb
--- /dev/null
+++ b/www/docs/integrations/mender.md
@@ -0,0 +1,15 @@
+---
+sidebar_position: 1
+---
+
+# Mender
+
+Rugpi can be used to build images for use with [Mender's](https://mender.io/) device management solution.
+Using Rugpi over [Mender's conversion approach](https://docs.mender.io/operating-system-updates-debian-family/convert-a-mender-debian-image) has the advantage that Rugpi's modern image building workflow and state management can be used.
+In addition, it works for 64-bit Raspberry Pi OS, which `mender-convert` does not support,[^1] and on newer Raspberry Pi's the `tryboot` feature can be used to deploy updates to the boot partition, including changes to device tree overlays in `config.txt`.
+
+To apply updates via Mender, a custom Mender update module is necessary.
+At this time, the respective module is not open-source.
+If you are interested, please [contact us](mailto:rugpi@silitics.com) so that we can send you the module.
+
+[^1]: At the time of writing. For updates, see [this issue in Mender's issue tracker](https://northerntech.atlassian.net/browse/MEN-5634).
diff --git a/www/docs/integrations/thin-edge.md b/www/docs/integrations/thin-edge.md
new file mode 100644
index 0000000..ecfb691
--- /dev/null
+++ b/www/docs/integrations/thin-edge.md
@@ -0,0 +1,10 @@
+---
+sidebar_position: 0
+---
+
+# Thin-edge.io
+
+[Thin-edge.io](https://thin-edge.io/) is an open-source, cloud-agnostic IoT framework designed for resource constraint devices.
+It provides an abstraction layer to interface with different providers of IoT management solutions such as [Cumulocity IoT](https://www.cumulocity.com/guides/concepts/introduction/), [Azure IoT](https://azure.microsoft.com/en-us/solutions/iot), and [AWS IoT](https://aws.amazon.com/iot/).
+Thin-edge.io officially supports Rugpi to build and deploy images.
+To learn more, checkout the [thin-edge.io Rugpi reference repository](https://github.com/thin-edge/tedge-rugpi-image).
\ No newline at end of file